Jump to content

Rusting Frame

HOTTWIN

By HOTTWIN
in Troubleshooting & Recalls

 Share

Recommended Posts

AllTerrainX Enthusiast

AllTerrainX

Posted
Posted

Just picked up my truck from my local GM dealership to deal with the flaking undercoat/rust issue. Not only did they clean it and respray the entire underside of the truck, but they also re-sprayed the interior fabric protection as well. There was nothing wrong with this, but they decided to do it. Thought they handled this issue very well. They think the flaking/rusting may have started when someone put the truck on a hoist while the spray had initially just been applied; could have been at the dealership or factory, they don't know. Doesn't matter - They made things right!

Before and after pics?

  • Replies 539
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

Jim Prufrock
Jim Prufrock

Ok, I am new to this site but as a GM tech who has been pushed too far, its time the truth came out! I know for a fact in the northeast, there is a service bulletin #PI056E: and its titled wax coating

OldHobo
OldHobo

That's not acceptable! Looks like it was done by a blind man. I'd be back there demanding to know why they had the truck for 3 days and that's all they accomplished. I sincerely doubt it's GM's fault,

pm26
pm26

Well, now you see the GM manufacturing trend for these trucks. The idea is to produce a comfortable vehicle with a car like ride, silent interior, and loaded with gadgets. This is bound to impress t

Posted Images

  • 3 weeks later...
tanner709 Enthusiast

tanner709

Posted
Posted

Looks like they are just spraying over the rust? I'm a little skeptical that the shops are cleaning the metal, prepping it, and then spraying.

 

I hope I'm wrong..

SilveradoSaver Senior Enthusiast

SilveradoSaver

Posted
Posted

Looks like they are just spraying over the rust? I'm a little skeptical that the shops are cleaning the metal, prepping it, and then spraying.

 

I hope I'm wrong..

 

 

They sent it to a local company to clean and prep the metal prior to re-spraying it. The first image I posted was the "before" shot, and the other three were the "after."

  • Like 1
tanner709 Enthusiast

tanner709

Posted
Posted

 

 

They sent it to a local company to clean and prep the metal prior to re-spraying it. The first image I posted was the "before" shot, and the other three were the "after."

That's a little more reassuring. I did the Krown rust protection on my 2016, and opted into the dealership corrosion kit - because it was the only way they would cover the paint. I'll keep everyone posted as I live in the worst climate ever where we use excessive amounts of sand and sand on the roads here.

  • 2 months later...
Sierra Jon Enthusiast

Sierra Jon

Posted
Posted

Anyone find a DIY solution for folks out of warranty. What product are people using? I'm not going to take the bed off.

royalkangaroo Enthusiast

royalkangaroo

Posted
Posted

Do you folks have success with the Nox-Rust for touching up spots? I'm proud of my '15 frame, it looks great after 2 VT winters. (My 2010 frame was completely peeling and rusting all over by 30k miles) The only trouble spots are from where the dealership puts it on the lift. I'm thinking about spot sanding the rust and either spraying oil, chassis saver, or getting some Nox-Rust. Wonder what the best option is?

Akamule Enthusiast

Akamule

Posted
Posted

Had the local dealer redo mine. They did the frame and that looks nice but all the suspension parts still look crappy. Better that it was though, I don't plan on keeping it more than a few years anyway.

  • Like 1
Jadis Enthusiast

Jadis

Posted
Posted (edited)

I bought my 2014 a few weeks ago, 50k miles, it was bought new up North before me. I didn't even think to look under the truck until this past weekend. The whole frame is rusted or spotted with rust. Wondering what I should do about it if anything... I didn't buy it at a Chevy dealership, but could I take it to one to see what they say? It's not a new truck so I dunno if TSB or whatever applies, haha.

Edited by Jadis
Buckshot556 Enthusiast

Buckshot556

Posted
Posted

I would buy a wire brush kit you attach to a cordless drill, clean off as much rust as you can, then paint over with permatex rust stopper or similar product. Then finish with a zinc infused black spray paint. You will have to do annual touchups but your frame will look brand new forever. Don't bother with replaceable components like suspension. They will be replaced eventually.

 

The Daubert NOX rust works great to touch up the frame, but spray paint is more durable against rock chips etc.

Buckshot556 Enthusiast

Buckshot556

Posted
Posted

Also a putty knife works great to scrape off the existing wax garbage if it's already a lost cause to save. I can only recommend the NOX Rust 121b if you only need to touch up small portions. If the frame is a lost cause just wire brush the hell out of it and paint it

Clint623 Enthusiast

Clint623

Posted
Posted

I bought my 2014 a few weeks ago, 50k miles, it was bought new up North before me. I didn't even think to look under the truck until this past weekend. The whole frame is rusted or spotted with rust. Wondering what I should do about it if anything... I didn't buy it at a Chevy dealership, but could I take it to one to see what they say? It's not a new truck so I dunno if TSB or whatever applies, haha.

I don't think it matters where it came from, it's still going to be rusty. I bought my '14 in November last year with 33k miles. Previous owner was a border patrol officer here in Texas so he always drove his govt. vehicle. Mine still had rust on the frame that I sanded off and painted with rust oleum.

 

 

Sent from my iPhone using Tapatalk

Colossus Senior Enthusiast

Colossus

Posted
Posted

What type of sanding did you do? Type of paper and what not?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Chuck FB
      OCI, not when but why?

      By Chuck FB · Posted

      That's interesting, I assume that would add to the cost of the oil but also I was forgetting to bring up the issue of the low tension rings allowing more oil past which in turn forces the cats to have more oil additives pass through them that wouldn't otherwise so they are creating that problem and of course its all in the name of fuel economy. Mind you the other issue would be the lack of additives that fight the formation of carbon within the piston ring grooves which turn the engine into an oil burner and with in this GM forums case is your average off the shelf Dexos licensed oil, meanwhile the other off the shelf oil being Valvoline's R&P isn't licensed and the only one that is which is that certain Mobil oil that came out recently ( its not even being marketed in Canada ) and only a fraction of vehicle owners are going to be using it out of all the other oils on the shelf or the quickie lube bay that meet the Dexos spec by way of actual licensing.    Also I suspect that its an easy excuse to pool the non turbo DI engines in with the turbo DI engines and design the oil to not have LSPI issues in the most demanding engines and short change the naturally aspirated DI by not offering a higher concentration of additive package they could handle and still not be at risk of LSPI.    I wonder if Amsoil flipped the switch just lately and did whatever packaging designation at the same time as I wonder what oil formulation I would have bought in May, of course I don't know when it was packaged at the factory vs how long it was in storage at the Edmonton warehouse. I know its been said at least in the past that the big players switch over to a reformulated oil but the packaging has not changed until they make that move as well so there is that cross over time where its a new formulation in a predated formula marked package. 
    • PunchT37
      OCI, not when but why?

      By PunchT37 · Posted

      Hmm. A real reason to not just use the odometer to determine OCI?    
    • Grumpy Bear
      OCI, not when but why?

      By Grumpy Bear · Posted

      Sad thing is that this doesn't have to be the case. LSPI can be solved without a reduction in TBN. Swap Ca for Mg.  Cats are not a issue if the OEM can get a ring and valve guide seal even at SN levels of SAPS. Dizzy is purring like a kitten with a bowl of warm milk. 200K of Full SAPS oil and zero detonation issues and nice a clean inside and out. This shouldn't be an issue. It isn't 1920.    Tell ya what AMSOIL SS is excellent at, internal cleanliness. The new formula is even a step up from their already outstanding cleanliness levels. Can't say the OEM offering is quite that clean. There marketing suggest the SS is cleaner.     That is the only defense with at shelf oil. Nothing wrong with them if you ignore the marketing and OEM 'recommended' OCI and use a thimble full of common sense. 😉 You go sir. 
    • StingerZ16
      Roll up bed cover experiences

      By StingerZ16 · Posted

      I started with a folding cover by BAK PAC on my 2500. It went bad after close to 5 years. Bent and vinyl coming loose. Contacted BAK and they gave me a very good discount on a Revolver. Had it a number of years. Mostly outdoor storage. Some garage storage. Vinyl started to come loose. Still under warranty so they replaced to cover. Sold the 2500, bought the 1500 and got another revolver for it. Had it a couple years now and no issues. I store it indoors. Got a bit of discount when buying it as well. If you are seeing problems, contact BAK or real truck and let them know. Customer service was pretty good. But I think they changed their warranty.
    • Chuck FB
      Towing In Loose Gravel

      By Chuck FB · Posted

      I agree, there is no one answer fits all as every rig is different, one may be pulling some little aluminum fishing boat while another is towing a monstrosity that weighs a lot and hopefully the owner if the rig has some prior experience to know what drive mode they should choose.    It also struck me and this is from watching a few of those boat ramp escapades videos in the past, Ford being one of the vehicles that has the auto front axle hubs and sure enough its found out that one hub has crapped out and won't engage and may not have manual hubs to even select on both sides so they are on the boat ramp stuck with no four wheel drive and spinning .... they flat out need a tow to get up the ramp and deal with the vehicles new found issues. That can happen to all brands of pickup, finding out either four wheel drive or 4 low isn't working right at the time its needed it to work as some electronic crap has failed. 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...