Jump to content

Recommended Posts

Posted

2015_Chevrolet_Silverado.jpeg2015_Sierra_Denali.jpeg

By Zane Merva
Executive Editor, GM-Trucks.com
9/8/2014

 

Chevrolet and GMC have officially confirmed which changes we'll see on the 2015 Silverado and Sierra.

 

As we've reported in the past, all new 6.2L engines going forward for MY15 will be paired with GM's all new Hydra-Matic eight-speed automatic transmission Other notable changes include Magnetic Ride Control for Sierra Denali, enhanced MyLink/Intellink with Siri Eyes Free, a new J2807 tow rating, and a set of new colors.

 

Heated and power adjustable trailering mirrors that include auxiliary backup lighting are pegged for late availability.

 

Here's the full change list for both models:

 

New on the 2015 Silverado

  • Hydra-Matic 8L90 eight-speed automatic transmission (6.2L V-8 models)
  • 12,000-pound max trailering capacity available, based on SAE J2807 Recommended Practices
  • Enhanced Chevrolet MyLink with Text Messaging Alerts and Siri Eyes Free
  • Available OnStar with 4G LTE and built-in Wi-Fi hotspot (3GB/three-month data trial)
  • New, available up-level trailering mirrors with back-up lighting
  • Argent grille with chrome surround on LTZ models with the Z71 package
  • Spray-on bedliner now offered on all models
  • USB port added to upper glove box on LT models with 40/20/40 front bench seat
  • Exterior colors: Rain Forrest Metallic, Deep Ocean Blue Metallic, Sunrise Metallic (limited availability) and, Orange U Tempted (limited availability), Overcast Metallic (limited availability), Pewter Metallic (limited availability)

New on the 2015 Sierra

  • Hydra-Matic 8L90 eight-speed automatic transmission (6.2L V-8 models)
  • Magnetic ride control suspension added to Sierra Denali
  • Enhanced IntelliLink with Text Messaging Alerts and Siri Eyes Free
  • Available OnStar with 4G LTE and built-in Wi-Fi hotspot (3GB/three-month data trial)
  • Revised trailering ratings based on SAE J2807 Recommended Practices
  • Spray-on bedliner now offered on all models – including three-dimensional GMC logo; standard on Sierra Denali (with Denali logo)
  • New, available up-level trailering mirrors with LED rear guidance lamps
  • USB port added to upper glove box on SLE models with 40/20/40 front bench seat
  • Exterior colors: Emerald Green Metallic and Stone Blue Metallic

2015_Chevrolet_Silverado.jpeg

2015_Sierra_Denali.jpeg

2015_Chevrolet_Silverado.jpeg

2015_Sierra_Denali.jpeg

2015_Chevrolet_Silverado.jpeg

2015_Sierra_Denali.jpeg

Posted

Something else new I noticed is that 3.23 is the non NHT ratio for the 8spd and 3.42 is the ratio for NHT.

Posted

 

  • New, available up-level trailering mirrors with back-up lighting

 

Hmmm what does that mean?

 

 

 

Also, can someone please tell me why the 8 speed is only available in the limited availability 6.2? Why the hell is it not offered in the 5.3? I have been trying to figure this out for quite some time now.

 

Posted

I'm not seeing "Rust Resistant Undercarriage " on that list.... :nonod:

  • Like 2
Posted

 

  • New, available up-level trailering mirrors with back-up lighting
Hmmm what does that mean?

 

 

Also, can someone please tell me why the 8 speed is only available in the limited availability 6.2? Why the hell is it not offered in the 5.3? I have been trying to figure this out for quite some time now.

Typical GM thinking
  • Like 1
Posted

Call it whatever you want but the 900-series was the exact same way. 6-speed was only on the Denali, then all 6.2s and then standard on all V8s and I think by the end all engines had it. They always stagger rollout of major new stuff.

Posted

 

  • New, available up-level trailering mirrors with back-up lighting

Hmmm what does that mean?

 

 

Also, can someone please tell me why the 8 speed is only available in the limited availability 6.2? Why the hell is it not offered in the 5.3? I have been trying to figure this out for quite some time now.

 

Probably haven't got enough capacity tooled yet to go across the board.

Posted

Probably haven't got enough capacity tooled yet to go across the board.

 

Probably true. Maybe they will offer it 1/2 way through the year.

 

Im not 100% sure buy i think i remember that when they rolled out the 6 speed is was available in the Yukon Denali and Escalade in 09 and then 1/2 way through 09 in the 1/2 tons and Tahoe/Suburbans

Posted

I knew I should have waited...Oh well, I am happy with what I have.

 

Still no HID's? In all the LTZ Tahoe's and SLT Yukon's, what is with that?

Posted

Still don't understand why the MyLink system can't be upgraded to the newest firmware. Crazy!! It's just software. I doubt there's a lot of hardware changes other than the 4g cellular from A&T.

Posted

I wonder if they still comme standard with vibrations, clunks, black puffs of smoke on start up, loose seats and seat covers, rusty frames and leaking onstar antennas? ....

Posted

 

Probably true. Maybe they will offer it 1/2 way through the year.

 

Im not 100% sure buy i think i remember that when they rolled out the 6 speed is was available in the Yukon Denali and Escalade in 09 and then 1/2 way through 09 in the 1/2 tons and Tahoe/Suburbans

 

Thinking it will be the 2016 model year by the time they dwindle the 8 speed down to the 5.3 &/or 4.3. 2009 was the split model year if I remember right between some trucks with the 5.3 to have the 4 or 6 speed?

 

GM is building the trans in house at their Toledo, OH plant. $260 million in plant upgrades just to build the thing & the project was started in 2011.

http://www.toledoblade.com/Automotive/2014/07/08/Toledo-plant-ready-to-roar-into-production.html <~Link 2 month old info.

 

But agree with you in that wish these would have been ready to roll out when the truck was introduced.

Posted

I wonder if they still comme standard with vibrations, clunks, black puffs of smoke on start up, loose seats and seat covers, rusty frames and leaking onstar antennas? ....

I must have "opted out" of all those standard features! :lol:

  • Like 2
Posted

Call it whatever you want but the 900-series was the exact same way. 6-speed was only on the Denali, then all 6.2s and then standard on all V8s and I think by the end all engines had it. They always stagger rollout of major new stuff.

 

not the 4.8, it was stuck with the 4L60E until the very bitter end when it along with the 4L60E was dropped for the EcoTec3 Engines.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Articles

  • Posts

    • No such thing as regenerative braking on a pure ICE vehicle.     Regenerative braking is the re-capture of energy from electric motors and stores it in the battery pack.  So hybrids, PHEV and EVs have regenerative braking.     What you are seeing is the charging system changing modes is all.  Its likely entering charge mode for some sort of reason is all.  All of the charging modes will be listed below.   As for L10 vs D.  L10 turns off automatic grade braking.  L10 puts you in control of grade downshifts where in D it will automatically do it based on brake pedal position and other factors.  Otherwise L10 and D drive exactly the same aside from that one aspect.    Battery Sulfation Mode The BCM will enter this mode when the interpreted Generator output voltage is less than 13.2 V for 45 minutes. When this condition exists the BCM will enter Charge Mode for 2–3 minutes. The BCM will then determine which mode to enter depending on voltage requirements.   Charge Mode The BCM will enter Charge Mode when ever one of the following conditions are met:   Windshield wipers are ON for more than 3 s. Climate Control Voltage Boost Mode Request is true, as sensed by the HVAC control module via serial data. High speed cooling fan, rear defogger, and HVAC high speed blower operation can cause the BCM to enter the Charge Mode. The estimated battery temperature is less than 0°C (32°F). Battery State of Charge is less than 80%. Vehicle speed is greater than 145 km/h (90 mph) A current sensor malfunction exists. System voltage is determined to be below 12.56 V When any one of these conditions is met, the system will set targeted generator output voltage to a charging voltage between 13.9–15.5 V, depending on the battery state of charge and estimated battery temperature.   Fuel Economy Mode The BCM will enter Fuel Economy Mode when the estimated battery temperature is at least 0°C (32°F) but less than or equal to 80°C (176°F), the calculated battery current is less than 15 A and greater than −8 A, and the battery state-of-charge is greater than or equal to 80%. Its targeted generator output voltage is the open circuit voltage of the battery and can be between 12.5–13.1 V. When fuel economy mode is active, the generator is not charging, only maintaining open circuit battery voltage. The BCM will exit this mode and enter Charge Mode when any of the conditions described above are present.   Headlamp Mode The BCM will enter Headlamp Mode when ever the head lamps are ON (high or low beams). Voltage will be regulated between 13.9–14.5 V.   Start Up Mode When the engine is started the BCM sets a targeted generator output voltage of 14.5 V for 30 s.   Tow/Haul Mode (if applicable) Pressing the Tow/Haul Mode button located on the center stack, the vehicle system voltage is raised and the remote (non-vehicle) battery will be charged. Having the headlamps on will raise the system voltage and if the Tow/Haul button is applied it will not serve any purpose. The voltage is regulated between 13.9-14.5 V.      
    • Hello from Australia Just sharing that there is now a way to delete the active shutters entirely with just a plug in module. Opens up tons of room to light bars etc.
    • I have an observation and a question... 1) I watch the voltage closely because I have had to dial in the cut-in/cut-out voltages of the battery separator to my camper.  The "smart" charging drives me nuts.  Anyway, I noticed that when coasting for a while, and especially if lightly using the brakes (though not necessary), the voltage goes up from mid/high-13 volts to mid/high-14 volts.  Then it drops back down after stopping or going again.  Consistently!   The only explanation I can come up with is REGENERATIVE BRAKING!  Well, maybe that's a little bit of an exaggeration, but it's certainly free extra battery charging.   2) Driving on mountain roads I will use L and vary the max gear.  Things straighten out and I end up in L10.  Sometimes I leave it there for a while.  Is there any difference between L10 and D?   
    • Do you think this width might affect the chalk test with a higher pressure closer to 65psi? I think lowering the pressure makes sense to get the tread to lay flatter
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...