Jump to content

Leveling with Bilstein 5100

agraves138
 Share

Recommended Posts

madsen203 Enthusiast

madsen203

Posted
Posted
5 hours ago, DeuceDeuce said:

Thanks to all the advice on this forum I leveled my 2016 with the 5100s. Tires are 275 60 20. Happy with the way it looks compared to stock. 

 

 

BAE76E0F-134D-4D78-91AE-BD649E7F717F.jpeg

E041CA23-E7C2-4A07-88D4-740EA6FBF5F4.jpeg

3rd or 4th setting? 

  • Replies 60
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

crushNchowda
crushNchowda

FWIW I have Bilstein 5100's all 4 corners top setting in front w/ 33" 275/60R20 Nitto Terra Grapplers + 2.25" (+1") rear blocks. My total before/after ride height for the front was a hair over 2.5"...

2016LTCC
2016LTCC

I like this look. Would you say the ride is better unloaded around rough town/city driving? Also, have you noticed any difference in wear on your front tires?

Kubs
Kubs

I also installed Firestone Ride Rite air bags to keep the truck level when towing.  Its rides great loaded or unloaded.   IMG_20180601_140227534_HDR[1] by Mike Kubiak, on Flickr

Posted Images

  • 6 months later...
RobinhoodNC Enthusiast

RobinhoodNC

Posted
Posted

Hi,

 

Sorry for bringing this old thread to life, do you know if there is a length difference between OEM front shocks & B5100 ?

 

I plan to install them in the future and get a small front lift, but I don't want to loose downtravel if 3rd or 4th setting can Bottom out the shock before reaching the bump stops ? Did someone tried different settings to see if softness & downtravel are optimal on stock setting or no difference whatever the Notch selected ?

 

It's my only interrogation before deciding to order them :)

 

Thks,

 

Robin

jimbrown1 Enthusiast

jimbrown1

Posted
Posted
On ‎2‎/‎11‎/‎2020 at 10:39 PM, RobinhoodNC said:

Hi,

 

Sorry for bringing this old thread to life, do you know if there is a length difference between OEM front shocks & B5100 ?

 

I plan to install them in the future and get a small front lift, but I don't want to loose downtravel if 3rd or 4th setting can Bottom out the shock before reaching the bump stops ? Did someone tried different settings to see if softness & downtravel are optimal on stock setting or no difference whatever the Notch selected ?

 

It's my only interrogation before deciding to order them :)

 

Thks,

 

Robin

Bilstein will tell you that the 4600 shocks/struts are the same as the 5100 when comparing the ride of the truck but need the 5100 due to any lift so the 5100 has a different length.  I used a spacer and kept the 5100 at the lowest level and the ride is much more controlled and I like it more now than when I bought it brand new in February 2019. 

  • 1 month later...
WilliamBos Senior Enthusiast

WilliamBos

Posted
Posted
On 8/23/2018 at 1:10 AM, agraves138 said:

Hey all, 

 

I just received my complete set of 5100's for my 2015 Silverado 1500 LT. I'm looking to level the front with the back using only the adjustments on the front struts (leaving the stock blocks, etc...). Presently the struts are on the stock setting (1 of 4 notches). My question is, which notch should I set the circlip on, to get the front level with the back? My truck is mainly a city driver, so I'm not worried about nose lift when towing and such. Just want the nose level with the rear during my city driving. Your help is appreciated.

 

Notch 1 - Stock

Notch 2 - 0.75" (19mm) Average Lift

Notch 3 - 1.26" (32mm) Average Lift

Notch 4 - 1.85" (46mm) Average Lift

 

Thanks, 

Ant

Great info.  Are new UCA’s needed?

Silva Enthusiast

Silva

Posted
Posted
On 7/18/2019 at 3:46 PM, DeuceDeuce said:

Thanks to all the advice on this forum I leveled my 2016 with the 5100s. Tires are 275 60 20. Happy with the way it looks compared to stock. 

 

 

BAE76E0F-134D-4D78-91AE-BD649E7F717F.jpeg

E041CA23-E7C2-4A07-88D4-740EA6FBF5F4.jpeg

I remember reading on here that after leveling, a 275/60/20 tire on stock wheels would rub. I know that the tire doesn't rub on stock height. Do you know if your set up rubs anywhere? Not sure if this is true or not maybe someone can help.

jimbrown1 Enthusiast

jimbrown1

Posted
Posted
On 7/18/2019 at 5:46 PM, DeuceDeuce said:

Thanks to all the advice on this forum I leveled my 2016 with the 5100s. Tires are 275 60 20. Happy with the way it looks compared to stock. 

 

 

BAE76E0F-134D-4D78-91AE-BD649E7F717F.jpeg

E041CA23-E7C2-4A07-88D4-740EA6FBF5F4.jpeg

I have the 2018 model but used a Rugged Off Road spacer on the 5100 front struts and have no rubbing at full lock on either side.  

DeuceDeuce Enthusiast

DeuceDeuce

Posted
Posted
5 hours ago, Silva said:

I remember reading on here that after leveling, a 275/60/20 tire on stock wheels would rub. I know that the tire doesn't rub on stock height. Do you know if your set up rubs anywhere? Not sure if this is true or not maybe someone can help.

Absolutely no rubbing.

3_Kings Enthusiast

3_Kings

Posted
Posted

I’m installing the 5100s to level my truck out to install wider wheels with 285 55 20 tires. I’ll need to run the fronts on the highest level to get the clearance I need. I do pull a trailer with my RZR pretty regularly. Will a 1” block in the rear be enough to keep me from running noise high or will I need 2”? 2015 Sierra All Terrain. 

  • 8 months later...
CbrownGT Enthusiast

CbrownGT

Posted
Posted
On 7/18/2019 at 6:46 PM, DeuceDeuce said:

Thanks to all the advice on this forum I leveled my 2016 with the 5100s. Tires are 275 60 20. Happy with the way it looks compared to stock. 

 

 

BAE76E0F-134D-4D78-91AE-BD649E7F717F.jpeg

E041CA23-E7C2-4A07-88D4-740EA6FBF5F4.jpeg

This is what I want to do. However, Any rubbing on UCA at all with this bilstein and tire size setup? Do you have the stamped steel UCA’s?   

DeuceDeuce Enthusiast

DeuceDeuce

Posted
Posted
17 hours ago, CbrownGT said:

This is what I want to do. However, Any rubbing on UCA at all with this bilstein and tire size setup? Do you have the stamped steel UCA’s?   

No rubbing on anything.

BCMoto Enthusiast

BCMoto

Posted
Posted

Whats the part# you guys use for front and rear? having a hard time trying to figure it out for my friends 17 gmc sierra

boettcher40 Enthusiast

boettcher40

Posted
Posted
On 12/11/2020 at 4:24 PM, BCMoto said:

Whats the part# you guys use for front and rear? having a hard time trying to figure it out for my friends 17 gmc sierra

Here are the part #'s I had for my 14 Sierra SLT. Assuming it isn't a Denali with Magneride these are the same part #'s you'll need. Link is from the set I ordered, however they were around 360 back in June timeframe.

 

Part Numbers 24-238304 and 33-238319

 

https://www.amazon.com/gp/product/B01AHQM0Z4/ref=ppx_od_dt_b_asin_title_s00?ie=UTF8&psc=1

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • C/K Man
      Silverado 4500-5500-6500 are they still being produced? Would have sold better as GMCs as well

      By C/K Man · Posted

      There was talk over the last couple of years that the contract to build these trucks between GM and International would not be renewed.  International moved production of all their other trucks besides the companion CV model out of the Springfield plant some time ago when they opened their San Antonio plant.  That left Springfield only building the Silverado Medium Duty, International CV Series, and some Express/Savanna long wheelbase cutaways.  International also put the plant up for sale some time ago.  This all answered my earlier question as to why GM and International did nothing with these trucks since they were introduced, as they had basically become a market 'placeholder' with a finite life.    The Silverado Medium Duty/International CV trucks were interesting combination of a GM powertrain, electrical system, and K2XX Silverado cab with an International chassis that was supposedly designed for a step-van type vehicle they never produced.  They were manufactured in International's Springfield plant along with the IH MV series initially.  When first introduced, there was much talk that the Silverado Medium Duty/CV would eventually get a gasoline engine option along with other upgrades and GM and IH would work on a class 6/7 joint venture truck.  This was before VW bought Navistar out, after that happened no more was said.  Draw your own conclusions...   About the time talk started that the GM/IH joint venture was not going to be renewed, rumors started that GM would develop a new line of medium duty trucks themselves.  The story is the new trucks will be part of the next generation HD's due in 2028, and will still feature a 'straight rail' chassis design that the current medium duty has.  GM views this as a desirable feature that differentiates their truck from the competition.  A gasoline engine option is also expected.  As the current Silverado Medium Duty remains in production until September 2026 and there is still a lot of inventory available do not expect any official word for some time.   I believe GM remains committed to their successful partnership with Isuzu, and all the LCF models will still be available from Chevy Commercial dealers.  Isuzu is on the cusp of opening a new large plant in South Carolina and there is also speculation that this may result in new product for both Isuzu and Chevy Commercial dealers.                  
    • davester
      push to talk button

      By davester · Posted

      drive the truck back to the dealer and complain that the button works.
    • davester
      push to talk button

      By davester · Posted

      drive the truck back to the dealer and complain that the button works.
    • nfisherman
      Software Update

      By nfisherman · Posted

      I have a 2026 2500 HD Ultimate. My phone app says there’s a software update available. It’s something about improved battery management and something to do with the running boards. I follow the instructions for the update but the “Check for Updates” option is greyed out in my settings menu. Has anyone else seen this? How did you resolve it? The help message just says “see your dealer” if the download doesn’t work. I’m just trying to save a trip. 
    • newdude
      Exhaust Question

      By newdude · Posted

      Fuel mileage?  That's all how you use your right foot.  Exhaust will give you sound.   Stock exhaust 5.3 is 2.75" diameter piping.     If the truck is nice and worth putting some $$ into it, I'd go for a Corsa catback.  I had one on my 2019 old body 5.3 and it was just perfect.  Zero drone, just driving around and cruising on the highway you'd think it was stock, but when you opened it up it was like a Camaro with the factory dual mode.  Corsa bumps their catback to 3in diameter.  

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...