Bilstein 5100s are a HUGE upgrade!

[Coles5515]

Wonder if the will be compatible with a TB model...

[redvettez06]

Edit never mind. I found the answer in the previous replies. 

Edited September 6, 2020 by redvettez06

[Coles5515]

So with the new 5100s up front for you TB/AT4 guys. Anyone have them set at the highest to “level”? Wondering if I can set them at the highest level will help with the massive rake...or do I need to do like a SST kit or even a 1” MotoFab..?

[lapoolboy]

52 minutes ago, Coles5515 said:

So with the new 5100s up front for you TB/AT4 guys. Anyone have them set at the highest to “level”? Wondering if I can set them at the highest level will help with the massive rake...or do I need to do like a SST kit or even a 1” MotoFab..?

The highest setting is only 1.1" I believe....that isn't going to level a TB/AT4.  

[ScX31]

44 minutes ago, lapoolboy said:

The highest setting is only 1.1" I believe....that isn't going to level a TB/AT4.  

They go up to 2.5” unless you have the 6.2. 
 

[lapoolboy]

1 minute ago, ScX31 said:

They go up to 2.5” unless you have the 6.2. 
 

The ones for the TB/AT4 don't.

[leverett.scott]

I wonder if you will be required to run new UCA's with the 6112's since they are a wider shock.

Sent from my SM-G981V using Tapatalk

[Cmp8254]

On 9/2/2020 at 9:56 PM, Tyler Alliston said:

Anyone running their fronts at the highest setting (2.5 in)? Is so did you add a block to the back?

I did not see anyone respond to this question.  Would love to see pics of a non-TB/AT4 with the front 5100s set at the max height. 

[Interleukin6]

It could be a dumb question but regarding the rear shocks... The boot side has to be down or up... or it does not matter?

[Hunter11]

Mine was installed up.

[Coles5515]

Both my fronts and rears were back ordered..... looks like I’ll be looking for someone who stocks these

[ScX31]

10 hours ago, Cmp8254 said:

I did not see anyone respond to this question.  Would love to see pics of a non-TB/AT4 with the front 5100s set at the max height. 

Same here. 

[Stranny]

3 hours ago, ScX31 said:

Same here. 

I have had the front and rears with a 2" blocks in my truck for about a month. Life happens so I haven't had time to do it. So I am getting a shop to do it Thursday. I'll post some pics when I pick it up and try to take one before and after.

 

 

[xsquid]

Finally got the rear Bilsteins installed. Have to say you can feel the extra damping when driving. Makes for a nice ride. Will keep my RC 2 inch leveling shocks which now have seam so settle at about 1.25 lift. Will get the new Bilstine front shocks with there spring when they come out in the future. 

[Lyons00]

Finally got the truck on the freeway, putting the rear shocks on, were a huge improvement on the ride!!

Edited September 10, 2020 by Lyons00