Jump to content

Recommended Posts

Posted

Contacted BBB last week. Then next day GM calls wanting to know what they could do to help. 1 week later, Gm calls back and nothing they can do "it is at factory specs". Same as before. NO HELP! now I can not get the BBB to call me back to discuss the next step. I have called different times of the day, left messages and still have not received a call back. I guess I will need to contact a Lawyer at this point. Truck is still vibrating at 45-60 and I can not get anyone to look at it or work on it. Shame that I have to fight so hard to get something to work the way it is suppose to. Pay good money for a piece of JUNK.

Posted

Contacted BBB last week. Then next day GM calls wanting to know what they could do to help. 1 week later, Gm calls back and nothing they can do "it is at factory specs". Same as before. NO HELP! now I can not get the BBB to call me back to discuss the next step. I have called different times of the day, left messages and still have not received a call back. I guess I will need to contact a Lawyer at this point. Truck is still vibrating at 45-60 and I can not get anyone to look at it or work on it. Shame that I have to fight so hard to get something to work the way it is suppose to. Pay good money for a piece of JUNK.

call six on your side

Posted

Contacted BBB last week. Then next day GM calls wanting to know what they could do to help. 1 week later, Gm calls back and nothing they can do "it is at factory specs". Same as before. NO HELP! now I can not get the BBB to call me back to discuss the next step. I have called different times of the day, left messages and still have not received a call back. I guess I will need to contact a Lawyer at this point. Truck is still vibrating at 45-60 and I can not get anyone to look at it or work on it. Shame that I have to fight so hard to get something to work the way it is suppose to. Pay good money for a piece of JUNK.

I am in the same exact situation. I haven't contacted the BBB yet because I was hoping GM or my dealer would step up. The engineer said everything is operating within specs and once he said that basically no one would help any further. The dealership said the can't work on it anymore for this issue because GM wont pay for it and GM said they won't help may with trade assistance at all. I cant even take it to another dealer because it is in the system now for this issue. So basically as long as I own my truck and anything that has to do with vibration I am screwed. The service manager told me I should trade the truck for another brand or a 3/4 ton GM truck because these issues are inherent to the 1500 model. I was at the Ford dealer yesterday and have a deal worked out on a F150 but I just don't like it as much as my Sierra and it will cost me $5,000 to get out of mine and into a new ford. I think GM's solution to the problem is setting a set of specs wide enough to state all the trucks with issue are within spec because they just need to cut their losses somewhere with all the issues they are having right now. If they lose a few customers in the process they are okay with it. I'm not sure if it's worth my time and energy to proceed any further and that's what the are banking on. It really sucks because I love everything else about the truck.

Posted

File with BBB. It only takes a few minutes and will show GM you are serious. The link is in my sig. Whaddaya got to lose?

Posted (edited)

I'm gonna look into filing a class action lawsuit. If anyone is interested in being part of it let me know. I read almost all the pages in this thread and I'm surprised no one has done it yet. It's been 2 month since the dealer has had my vehicle to try to fix the issue.

 

I tried to go to another dealership but they told me since I didn't buy it from them I was sol. GM customer service keeps telling me they are waiting to hear back from their internal resource.

 

I'll be damned if I lose 5k on trading it in because GM doesn't want to address the issue.

 

I've already filed with BBB waiting to hear back.

Edited by sideoftheroad
Posted

My dealer has several vibrating trucks, I was the first to put LT tires on, and correct the vibe, they just put a set of LT bridge stones on another truck, and it smoothed it out. Seems that's the fix

Posted

I think the "lightweight" p tires give the best gas mileage, but can't handle the weight/speed for some reason.

Posted

My new 2014 sierra has a vibration issue that starts around 70 and gets worse the faster i go. The odd thing is it comes and goes and is worse on smooth asphault than on rougher roads. The steering wheel and pedal are fine but the seat vibrates pretty bad. I only have 1200 miles on the truck and havent had a chance to go to the dealer yet.

Posted

My new 2014 sierra has a vibration issue that starts around 70 and gets worse the faster i go. The odd thing is it comes and goes and is worse on smooth asphault than on rougher roads. The steering wheel and pedal are fine but the seat vibrates pretty bad. I only have 1200 miles on the truck and havent had a chance to go to the dealer yet.

 

 

that's mine exactly

 

droppin it at dealer Monday for the shake and the driver seat butt heat not workin back is.. hope they resolve both love my truck got it set up just the way I like it

Posted (edited)

2014 GMC Sierra 1500 SLT Crew cab short bed 4x4 Z71 5.3L 3.42 axle ratio. (Vibration issue solved)

I purchase my truck a month ago. When I took it for a test drive got up to about 50 mph and it shook really bad, went right back to dealer and they said the tires were flat spotted and should smooth out in about a 100 miles if not they would replace them. So took it back down the road again and it was all ready alittle better. The build date on the truck was 4-14 so it had been sitting on a lot for about 7 months so made since to me. On the way home with the truck the vibration was not to bad almost seemed gone at times.After a few weeks had passed did some testing and on relly smooth road is where the vibration was the worst. My tire psi where all at 34 psi. The vibration was really bad from about 73 to 85. I called the dealer told them the problem and the shop foreman told me give it until 1,000 miles if not gone they would replace the tires. So a few days ago took it back to dealer with 1065 miles on it. They first did a road force test on the right front tire Goodyear wrangler sr-a P275/55R-20 that read 41lbs then the right rear 72lbs. They said forget took them off. I had already told them in advance that if it was the tires I wanted to replace them with a set of Michelin LTX M/S2 so they had already order them for me just incase. I told them I would pay the differance between the goodyears and the Michelin if thats what it took it cost me 107 dollars was glad to do that. My vibration is gone. If you really and try to feel a vibration on a smooth as can get road you might feel alittle if you really really try but as good as it gets to me. I think most of the the vibration issues are tires not to rule out some with drive line issues.In the beginning when it really shook bad on the test drive and it got better knew it was flat spotted tire on mine since it set on a lot for 7 months. Hope everone gets there sierra's and silverado's smoothed out. If GM would just admitted they have a problem with these crappy Badyear tires recall all of them if would solve a lot of problems

Edited by southern_sierra
  • Like 2
Posted

New Michelins didnt fix mine. Glad for those of you that did get your truck vibration fixed that way, or fixed in any way.

 

AFA class action lawsuits, I dont know everything about them, but it always seems that when I hear about them being settled, the people who had actual damages are awarded pennies on the dollar, while the law firm representing the class action gets millions. Im not interested in making more lawyers millionaires while Im left feeling shorted.

Posted

My dealer has several vibrating trucks, I was the first to put LT tires on, and correct the vibe, they just put a set of LT bridge stones on another truck, and it smoothed it out. Seems that's the fix

Exactly what I did on my own as well
Posted

Hey everybody, *********************

I've recently resolved my shaking/ vibrating issue and would like to share my story to help out:

 

I have read through most of these pages before going to have my own new 2014 Silverado 1500 LT worked on due to significant shaking/ vibration at ~ 65-80+ mph. I first took it to the dealer and told them what was going on, came back a few days later to pick up. I asked if they fixed it, and they hesitated and said "I don't know, you tell me. It's a lot better." .... not what you want to hear. They say they did a Road Force Balance and found all 4 tires were out of spec. They claim to have put them back into or very close to spec. Anyways, I get out on the road and it's quickly apparent that the shake is MUCH worse. It was now shaking up and down and side to side. While driving down the highway at 70-75, one of the weights comes off the wheel and strikes the inner fender, which believe it or not actually made it ride better.

 

Needless to say, I am very upset. So upset that I'm physically sick. Feel that I have made a huge mistake by getting this vehicle and am now trapped with the payments. Next I do a quick google search and drive to an independent family owned tire shop and tell them about it. They ask what tires are on it and are not at all surprised by the issue. Goodyear Wrangler's are circular pieces of garbage. I get there and meet with them. They disclaim they don't really know what the problem is and don't want to sell us new tires only to have the same problem. So we decide to pull the wheels/ tires off and put it on the balancing machine. The owner invited me to stand with the technician and talk to him as he checked the balance. (not road force balancing, just normal balancing on a Hammerhead Technologies machine) The front left tire goes on the machine with current balancing weights still attached from the dealership. Guess what.... its 3oz off on the outside half of rim and 0.5-0.75oz off on the inside of the rim!!!!!! A total of 3.5oz off. They say the average person can detect 0.5oz and greater, so this thing was WAYYYYY off.

 

Not only that, but they had put weights all around the inside of the rim to counterbalance some of the other weights that are in the wrong spot. Tire guys say the weights are all supposed to be grouped together, otherwise you are just chasing bad weights and furthering the problem. All the tires were balanced poorly. While watching the tires spin on the machine, I could see, on every one of them, that they were not round. I'd say they had about a 1/4" to 3/8" or so of up and down difference/ bounce while spinning ( after fully balanced by tire professional). Technician and owner say that if it was a Michelin that was that much out of round, they would send it back for a new one because they are much better tires.

 

Fast forward balancing is done and I'm driving on same goodyear wrangler. Immediately better and very smooth at 65 and below speeds. Now has very very slight vibration, not a shake, at 75 mph and is quite smooth below that. Turns out it's the friggin' tires after all!!! The remaining vibration is due to the fact that THEY AREN"T EVEN ROUND!!!!!

 

A guy on here called Stex said it over and over again that you need to go somewhere else other than the dealership to get this done. He was completely right (even though he doesn't even have a Silverado lol) I wen't back and confronted the dealership about this. Apparently the guy at the my chevy dealership doing the balancing was just hired on, was a troubled teen, and was apparently using a poorly calibrated machine with no training.... Don't think the dealership is a place to have competent work done, that's for sure.

 

Now I have driven over 1900 miles on them and they have smoothed out a tiny bit more, but a small vibration is still present at 70-80 mph. It is very slight and almost not noticeable anymore. I expect it will disappear when I get new tires (Michelins hopefully). On smooth roads the truck is smooth, on rough roads the truck is rough. The thing is stiff so don't expect a glassy ride all the time. I hope this helps.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • First off, I'm not trying to just get easy advice/fixes for the issues I've noticed so far.  I'll be combing through the site via searches and such, and if past experiences are any indication, should find what I need.  For the sake of conversation, though, I figured I'd post the handful of things I've noticed in the 12 hours since buying my 2010 SLE CCSB.     Indicator lights: Airbag and TPMS.  The tire pressures aren't reading for any of the wheels, so I'm pretty certain the sensors were either removed, are damaged, or are otherwise inoperable.  I used to mount and balance tires 25 years ago but am pretty much ignorant when it comes to TPMS.  My 2006 didn't have the sensors and this might be the fourth vehicle I've owned that does.     Radio: Rear speakers aren't working.  I removed the driver's side rear door panel and checked the speaker and wiring.  I also removed the sill and b-pillar covers to check the wiring.  A few minutes of Google Fu showed that this is potentially a head unit issue.    Switches: Power mirrors don't turn left/right.  I ordered replacement driver's door switches that should arrive tomorrow.  The windows and locks work but it was only about $20 for all of them.  The driver's side rear window switch lets the window down but won't put it back up.  I think the passenger rear doesn't work at all.  In the coming days/weeks, I'll break out my multimeter to check all of that.   Unknown wiring harness: There's a box attached to the front driver's side of the engine compartment, right where the second battery shelf is located.  There are three plugs, one of which looks like it fits a standard headlight-style bulb (9007 or similar).  It doesn't look like it's plugged into anything.  I'll do some digging and if I don't see anything elsewhere on the site, post some pictures here.   Unknown plugs on brake booster: There are at least two female plugs on the brake booster that aren't being used.  I think it might be a replacement/aftermarket, so maybe those are used for a different application, as there don't seem to be any unplugged harnesses and no indicator lights are on.   Little squeaks when turning: Sounds almost like a bushing around the bed of the truck.  I'll have to pay close attention as I get more familiar with the truck.   Clunk on acceleration: possibly the infamous drivetrain clunk.  My 2006 had it and I'm just not familiar enough with this truck yet to fully grasp what it is.   Anyway, my apologies for the vague and all over the place post.  This truck is new to me, and it's been four years since I drove my 2006.  With 200k miles, I know I'll need to learn this truck quickly to avoid having any major issues, despite being confident it's got much more life to it.  My 2006 had nearly 320k on it when I parked it (nearly 300k of which I put on the truck), and it was still drivable then, though I suspected the head gasket might have blown.  I'd hoped to have that truck back by now, but it's gone forever, as I detailed in my reintroduction thread.  
    • I always drive in Sport mode. With more driving, I am finding the initial response when accelerating is much quicker now🖕 Lou
    • Is it an optical illusion in the pic or is the truck really squatting that much horribly?
    • My initial introduction was here.  It's hard to believe that I last posted in February 2013, having just deployed to Kyrgyzstan.  Since then, I've retired from the military and the 2006 Sierra SLT Z71 that first brought me to these pages was lost.  I went forward to Afghanistan in March 2013 and did a lot of sitting behind a computer on brigade staff.  Within 18 months of getting back to the States, I was selected for Drill Sergeant duty, after which I moved back to Virginia (my home state and where I served from 2004-2008).  That '06 Sierra did a lot of driving between Louisiana, Georgia, and Virginia, and ended up with nearly 320k miles by 2022.  By then, the registration had been expired for a couple of years, but the pandemic had all but eliminated tickets for such transgressions.  Admittedly too, I usually drove my wife's SUV or son's car the 2-3 times a week I had to report to work.  Teleworking sure was fun while it lasted.   I started my retirement leave four years ago and stored the Sierra at my sister's house.  A big mess was made when her fiancé passed while she was taking care of business out-of-state in late-2024, and his son pretty much mismanaged everything to do with the estate.  Even so, I was assured that my truck was safe... until it wasn't.  I found out that my truck had been scrapped about four months after the son took over everything.  There's nothing I could do; I'm 1000 miles away and it was technically abandoned property since he'd even trespassed my sister from her own house (she had no claim to it as she wasn't married, and the fiancé was the sole owner).     Anyway, today I got my second Sierra.  This is a 2010 SLE 2WB CCSB with a little over 200k miles on it.  It's got the 5.3L I'm familiar with and should handle what I need it for.  Hauling stuff that won't fit in the Transit Connect (yep, I sold out, but that's the wife's vehicle) and towing a few times a year tops.  The price seemed decent, considering how much people sell their trucks for in the Deep South: $4500.  I've seen similar trucks listed for more than double that.  I got it from a coworker who left his tag on until we transfer the title next week (Louisiana requires a notary for transfers), so I've been driving it all day.  The rear speakers don't work, which is one of the things that brought me back to these forums earlier.  I can't say how active I'll be as a poster, but I'll be scouring the archives while I find out every little thing I can about the 2010s and particular nuances/problems with my truck.   It's definitely not a GMC, but I got another Willys Jeep a few months back as well, so I'm almost at the same place I was when I first joined gm-trucks.com.  My old 1960 DJ3A was sold back around 2010 or 2011; my current Jeep is a 1946 CJ2A.  So, I've got a slightly newer GMC and a much older Jeep.  I kind of wish I still had that F-250 I had way back when too.  The Dakota is long gone and was technically my brother's truck, though I had it registered and insured.  The F-250 had to go when my grandmother's house was foreclosed on due to mismanagement around 2012 or so.     Hopefully anyone that made it this far isn't too annoyed.  I tend to be long-winded, but I'll be doing more reading than posting in the coming months.
    • There was a recall on the tailgate in general for opening on its own. Mine has a cap on it and it won’t let the tailgate open.   My tailgate has two holes in the top of the tailgate. I filled them in with silicone sealant. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...