Jump to content

Recommended Posts

Posted

Run like hell from this truck, its not the tires. Vibration is exactly the same after rebalance. Problem is with the engine or transmission. Transmission is sloppy and GM won't help you. Had high hopes when I bought the truck, spent my savings, and all I bought was a nightmare.

Posted

I'm my truck I believe it the tires..If u read my previous posts I put up there reviews from tire rack on vibration issues w the tires..well have to see what happens..I will keep u posted. .friend has same truck w different tires same rims no vibrations or problems whatsover

Posted

I hold Michelin in the highest regard in terms of getting what you pay for. But that said, even they are doing tire recalls for sidewall & out of round issues...

 

There have been several over the last couple years in various size tires for them. This is the most recent. http://www.michelinman.com/safety-recall.page

 

Have only found one tire that Goodyear did a excellent job on & that was a 16 ply trailer tire, the rest were junk. Not a fan of the GY's on my 2013 in terms of traction, but no vibrations or anything odd.

 

Also curious if anyone has drilled this issue down to only crew cabs that have this issue or is it present on reg & double cabs as well? With crews coming out of Mexico, are the tires for that mfg facility sourced elsewhere

than the tires that go to Fort Wayne, IN?

Do not own a 2014, so have not looked into it farther than glancing across this thread.

Posted
Run like hell from this truck, its not the tires. Vibration is exactly the same after rebalance. Problem is with the engine or transmission. Transmission is sloppy and GM won't help you. Had high hopes when I bought the truck, spent my savings, and all I bought was a nightmare.

Exactly

 

Sent from my HTC6500LVW using Tapatalk

 

 

Posted (edited)

Glad I came upon this thread tonight, I just left the dealership up here after being offered a great deal. I was about to sign all the paperwork and hand them the keys to my 06 F150 (that still drives great) but I had that knot in my stomach so I said I needed the night to think it over. Long story short, googling 14 sierra problems brought me straight here I probably won't be going back after reading this, especially knowing GM doesn't have a clue. It mystifies me that this issue can stump designers, engineers and technicians on a $40,000 truck. The one thing that sucks is that the '14 sierra sle 4x4 I'm about to get blows the '14 f150 and ram out of the water as far as looks and the cabin go. This seems like a truck that will take me to the year 2020 and I won't regret a moment. The 14 F150 however is no better looking inside or out than my 06. I want to love this Sierra but I'm not sure If I can live with the nagging feeling that something major will go wrong after 1k. Maybe they will put my almost new Firestone Destination AT's on the new one and put the Sierras tires on my trade, they are the same size. Hopefully that is the problem but it doesn't sound like it. Probably backing out completely and waiting till this summer for the 15 F150. Kinda bummed. (but also glad i know)

I have had zero issues with my truck, almost 7k on the clock. I'd suggest you take the one your thinking about buying on a hard long test drive.

 

I just had my truck in for service yesterday, I asked the Service manager how many 2014 are coming in for vibration. I've know the guy for 15 years, his reply was "none". Largest by volume dealer in Oklahoma.

 

Mike

Edited by mzodarg
  • Like 1
Posted

I'm very suspicious of Mike's comment. When I called a second dealership to discuss the vibration in my steering wheel he said he was happy to take a look but I "probably wasn't going to like what he was going to tell me". Just like the previous dealer he went on to say all/most of the trucks on their lot have similar problems. Maybe the northeast/NY got a bad batch of trucks? I wanted to enjoy this truck. Beautiful interior, nice looks, but every time I reach 50-60 mph I'm reminded of how poor the vehicle drives......which was never the case with my 2008 or 2003 Silverado. If it was the tires wouldn't the vibration change a little after the rebalance? Wouldn't the frequency or speed at which the vibration occurs change slightly just due to the different weighting and new placement of the bad tire? Vibration was exactly the same in every way after the rebalance. If GM had any confidence in its product they'd be all over this, assisting their loyal customers. Instead they just make sure you have the names of other dealerships in the area, which is useless.

Posted

For all you guys having this problem, have you or the dealer checked the level of transmission fluid? Possibly play in the carrier bearing? Could it be the 2 piece drive shaft? This is what causes the majority of the same problem on the Tacoma along with out of round stock tires.

Posted

I'm very suspicious of Mike's comment. When I called a second dealership to discuss the vibration in my steering wheel he said he was happy to take a look but I "probably wasn't going to like what he was going to tell me". Just like the previous dealer he went on to say all/most of the trucks on their lot have similar problems. Maybe the northeast/NY got a bad batch of trucks? I wanted to enjoy this truck. Beautiful interior, nice looks, but every time I reach 50-60 mph I'm reminded of how poor the vehicle drives......which was never the case with my 2008 or 2003 Silverado. If it was the tires wouldn't the vibration change a little after the rebalance? Wouldn't the frequency or speed at which the vibration occurs change slightly just due to the different weighting and new placement of the bad tire? Vibration was exactly the same in every way after the rebalance. If GM had any confidence in its product they'd be all over this, assisting their loyal customers. Instead they just make sure you have the names of other dealerships in the area, which is useless.

The service manager I know is a personal friend, we fish, hunt and drink beer together. He has nothing to gain for lying to me.

 

 

I just have a hard time understand why some have it and others don't. If it's tires then that would be easy to determine. It appears to me that it's not tires, is it wheels, doesn't sound like it.

 

Doesn't appear to be an issue only in 4x4's or 2x4's, I'll guess with you!

 

All I do know is I have 7k on my 2lz LTZ z71 with 22" rims and No vibrations!

Posted

Purchased a 2014 chevy 4wd crew cab, 3.43 rears, 20" goodyear wranglers about 3 months ago. I had the shake too. I fortunately had the shake resolved by my dealer after 2 failed attempts. I had to call GM and threaten lemon law, but they came through and the truck is smooth now. The replaced tires first time around and roadforced them. It didnt work. 2nd attempt - another new set of tires and roadforced again. No good again. Finally they ordered a new driveshaft and Michilin LTX, roadforced and finally smooth as glass. All I can say is have patience and if your current dealer isnt cooperating then contact GM and have a case opened and tell them your troubles with your dealer. I truely believe that the dealers are baffled by this and are trying anything to fix. GM engineers are responsible for this. They shouldnt have released a truck with issues like this. Patience... its hard but its out of our control.

  • Like 2
Posted

Purchased a 2014 chevy 4wd crew cab, 3.43 rears, 20" goodyear wranglers about 3 months ago. I had the shake too. I fortunately had the shake resolved by my dealer after 2 failed attempts. I had to call GM and threaten lemon law, but they came through and the truck is smooth now. The replaced tires first time around and roadforced them. It didnt work. 2nd attempt - another new set of tires and roadforced again. No good again. Finally they ordered a new driveshaft and Michilin LTX, roadforced and finally smooth as glass. All I can say is have patience and if your current dealer isnt cooperating then contact GM and have a case opened and tell them your troubles with your dealer. I truely believe that the dealers are baffled by this and are trying anything to fix. GM engineers are responsible for this. They shouldnt have released a truck with issues like this. Patience... its hard but its out of our control.

At least in your case it pretty much points to the drive shaft that was the problem.

Posted

Hector, quit crying in your beer and go to someone that balances tires for a living, not sell trucks. You guys going back to dealer for a balance, OK maybe twice, after that find some one that can balance a tire. Replacing OEMS is a mod.

Posted

The service manager I know is a personal friend, we fish, hunt and drink beer together. He has nothing to gain for lying to me.

 

 

I just have a hard time understand why some have it and others don't. If it's tires then that would be easy to determine. It appears to me that it's not tires, is it wheels, doesn't sound like it.

 

Doesn't appear to be an issue only in 4x4's or 2x4's, I'll guess with you!

 

All I do know is I have 7k on my 2lz LTZ z71 with 22" rims and No vibrations!

I have two 14 Silverado crew cabs, 342 rear end, 4x4 trucks with the Goodyear 20 inch SR A tires and Chrome wheels and both are smooth as glass. 5,000 miles on one and 2,000 on the other. NO VIBRATIONS or any other problems for that matter. It is difficult to understand why some people have the vibration and many more do not.

Posted

my local chevy dealer called me today told me they wont do nothing to fix it....told me to bring it back to the dealer you bought it from...

 

the tech said tires are out of round and unsafe and they dont care!!!

 

chevrolet of milford ct stAY AWAY FROM THEM 2ND BAD experience there......

 

gm dealers and GM customer service really suck

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • I had skimmed through that article when you posted the link and honestly I felt rather defeated in a sense and realized that all these years in changing oil that in fact putting in what I was told was a good quality oil was probably not filtered as well as it should be although the filter put on the engine would be what ( as long as it never went into bypass mode ) would be the final filtering of the new oil that the engine components would first see, but then the filtering media itself is not up to par to what is ideal because a full flow filter would be too restrictive to filter fine enough for the engines best outcome in the long run. Only one of our tractors over the years which was a Versatile with a 855 Cummins had a separate bypass filter, some engine manufacturers did spec a partial bypass system within the main oil filter but I don't believe any other trucks or equipment I was servicing used such a filter. No doubt a product like the Amsoil bypass system is of benefit as long as nothing goes sideways with the extra plumbing and filter such as a rupture/leak that could cause the oil to pump out of the engine ( yes that Versatile had a remote canister with hoses routed to it as well ). With the idiot egr system on a diesel and as a result forcing a lot more soot into the oil, that certainly isn't helping the diesel engines cause or as you pointed out the GDI engine issue with creating more soot and aside from having a fancy secondary filtering system, changing the oil more often helping lower the total soot load.     So oil manufacturing and the end product is not something one can control and I wonder if there are specs on what various oil packaging companies produce in particle count or size. As to the filtering, if the OEM is not designing a filter size and spec that is really what it could be, they too are short changing the end user and so what is the answer. Of course as you say the oil side can only do so much if the air side isn't keeping up its end of the picture and air filters are only so efficient and if in a dusty environment such as farm or construction or driving gravel roads there is a lot of dirt to filter out and some of that ends up into the air stream.    Of course the irony in places like where I am where they dump the salt on the highways but also will mix in some calcium or outright pure calcium for problem road area's, or using calcium as dust control on gravel roads, the vehicle that gets used in that environment may rust out before a properly engineered engine and maintenance finally wears out so one has to face that reality in the rust belt. 
    • Has anyone run these on their 2500?
    • have you stuck with dealer oil changes since then? I made the same switch after getting tired of crawling around under the truck, but I’ve found some dealers are way better than others about getting you in quickly. Curious if yours has been good about scheduling or if you’ve had to look elsewhere for quicker turnaround.
    • Thank you.   I am set on a 3.0 Duramax as my previous truck with a Ford Ecoboost had just as many, if not more, "common" issues.  Cam phasers, timing chain issues, 10-speed valve body and CDF drum, emissions issues, etc.  So I figured, why not get 2x the fuel mileage (these things got 27+mpg on every mixed city/highway test drive I put them through) and better towing capability with resale value to boot?   My minimum, shortest trip will be 50 miles 1-way and I regularly go out of state with a travel trailer.  I'm planning on using this for a marketing/event promotion business also, which would require regular towing of trailers for bands, DJs, sound and lighting gear, along with my personal camera gear for filming events.   Looked at other trucks in the $30k+ price range but the issues seem to be everywhere, plus too many with gaudy mods.  I'm literally sticking with RWD trucks because they tend to be actually used as trucks, vs. the 4x4 models I've seen with unsafe lifts, huge tires, and general mods that would affect reliability (I'm wondering if some of them were tuned, hence the aggressive throttle response and hard shifting).   So my goal is to find a stock, 3.0 with 1 or 2 owners, in good physical condition, and decently well maintained.  Can't seem to find that up here, everything in the $27-30k range has had multiple owners, smoke smell, issues, or body damage.  Or the ridiculously modified trucks with 80k miles for under $27k but lots of problems...
    • That’s pretty tough Grumpy. I reread the previous few posts. They all reference oil changes. Much like your last thread. In my humble opinion it keeps things interesting.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...