Jump to content

Recommended Posts

Posted

"The third covers 152 of the 2015 Chevrolet Silverado and GMC 1500 pickup trucks over concerns the rear axle shaft could fracture while the vehicles were being driven."

 

 

 

I wonder how only 152 trucks are affected. Sounds pretty dangerous to me.

Posted

The ride quality problems in the 2014 GM trucks goes far beyond just simple tires, or balancing issues. It's not directly related to rear ends only, or trans issues either. Last summer I was working hard to chase and get repairs for my 14 Silverado and after having everything swapped out by the dealers and engineers...my truck was deemed "normal". I dumped that lemon and drive a different brand of truck now and am happy again. In my opinion, it's an overall lack of quality control. The tires arent the best (most have GY SRA tires), almost everyone's drive shaft is out of spec...you can comfirm by lifting the rear end and letting it spin in gear with a strobe light (they swapped two shafts out of mine and I felt varying degrees of small improvement. Trans are out, pumps arent sufficient, rear end quality issues, fron suspension too small for the truck, aluminum steering components, hub assemblies adding to a wobble at high speed, mine even felt different and changes vibratory characteristics on windy days, with the tailgate down, or when following too close to a large truck on the highway. Air turbulence plays a role in ride quality...just sit in the bed of a truck while it's goijg down the highway and you'll feel all sorts of forces. If the aerodynamic issues were properly addressed in a wind tunnel during design, and quality control was much better on all drive line parts, these trucks wouldn't have the vibration issues they do. To date, NOBODY has had their truck fixed. Not one. Soe have trucks that drive better after rear end swaps, or new drive shafts, etc but they are not fixed. I lived this for almost a year...those trucks just vibrate and for those who say theirs dont just arent feeling it. I've driven two that were supposedly "smooth as glass" and left the tell tale harmonic "woom, woom" at 70 plus, and the overall shake from 60 up. As for tires, my new truck of a different brand has Good Year SRA tires, P rated, and I get a very good highway ride from them. This thread is a year and 5 months old....there is no magic fix. I suggest you decide if you can live with the ride quaility, or trade out to something else. Take it from someone who spent 8 months trying everything with no resolve whatsoever. Maybe the 2016's will be improved...but I doubt it unfortunately.

 

You've gone on at great length, but one thing stands out... Many owners HAVE had their vibration/shaking issues fixed. I am one. We don't post every day about our successful experience, but many exist.

My 40-50mph "rumble-strip" vibration required a new rear end, but is now trouble free. I just finished a 4 day, 1800 mile trip at speeds up to 85 mph, but mostly at 65-75 mph, towing a 2000 lb trailer. Ave mpg about 18-19, best 50 mile, 24+. Try that in your Ford, Dodge, or Toyota, then, get a life.

  • Like 1
Posted

You've gone on at great length, but one thing stands out... Many owners HAVE had their vibration/shaking issues fixed. I am one. We don't post every day about our successful experience, but many exist.

My 40-50mph "rumble-strip" vibration required a new rear end, but is now trouble free. I just finished a 4 day, 1800 mile trip at speeds up to 85 mph, but mostly at 65-75 mph, towing a 2000 lb trailer. Ave mpg about 18-19, best 50 mile, 24+. Try that in your Ford, Dodge, or Toyota, then, get a life.

Oh, you mean like this?

 

F150dash010215.jpg

 

The 5.0 F150 has more horse power, can tow more, and gets the same or better gas mileage without all the headaches and recalls. I've owned a 14 Vibratorado for 8 months, and a 14 F150 for 4 months. There's no comparison...my Ford gives up nothing to that POS Chevy that GM ripped me off with! By the way....your ignition system was just recalled today. Better take your truck in....AGAIN.

Posted

Oh, you mean like this?

 

F150dash010215.jpg

 

The 5.0 F150 has more horse power, can tow more, and gets the same or better gas mileage without all the headaches and recalls. I've owned a 14 Vibratorado for 8 months, and a 14 F150 for 4 months. There's no comparison...my Ford gives up nothing to that POS Chevy that GM ripped me off with! By the way....your ignition system was just recalled today. Better take your truck in....AGAIN.

So you are happy... so am I, but you won't find me on the Ford forum posting bogus b.s. We now know you are a Ford person, so go stink up their space.

  • Like 1
Posted

Just for the record the 5.0L dont come close to the 5.3 in the torque department

Doesn't come close? The 5.0 has 380 torque, 360 HP. The 5.3 has 383 torque and 355 HP. What's not close about that? The Ford actually has a much more efficient torque curve right to peak.

Posted

I've owned Fords and now a GM truck. Ford makes a serious truck. But the new GM trucks are pretty nice. They definitely have some issues though. With all the ignition switches GM has recalled, it's amazing how not every single vehicle being made doesn't come with a push button start system and comfort access to keep those massive girl key chains in their purses. I've been harping on GM about their 1970 keys now for almost 10yrs.

  • Like 1
Posted

 

 

Doesn't come close? The 5.0 has 380 torque, 360 HP. The 5.3 has 383 torque and 355 HP. What's not close about that? The Ford actually has a much more efficient torque curve right to peak.

 

Yup, DOHC design with twice the parts all for a whole 5hp...

Posted

I've owned Fords and now a GM truck. Ford makes a serious truck. But the new GM trucks are pretty nice. They definitely have some issues though. With all the ignition switches GM has recalled, it's amazing how not every single vehicle being made doesn't come with a push button start system and comfort access to keep those massive girl key chains in their purses. Hard to have a ignition gate situation when the cars don't even have an ignition switch! I've been harping on GM about their 1970 keys now for almost 10yrs. Just now in 2014 on my Silverado did they go to a laser cut key. Tell you one thing though, if the 14's still had their older keys I would of bought a Ram. The laser key was a minimum for me. Plus it's hard to stick a screw driver into the column and steal the truck when there is no key slot. GM has a good 1/2 ton, but needs to hire some OCD type A BMW guys to go over it.... My truck has 13k on it. Vibration free. I only notice some vibration when the "free oil change monkeys" pump my tires up to whatever they want. 35 front, 33 rear is the sweet spot I keep them at. I don't haul or tow much normally. If I was towing or hauling a big load I'd up the rear tires to 35 cold. Has anyone actually looked at the contact patch of the rear tires with 35 cold? or better yet the dealers 40psi. After driving 1hr home only about 75% of the tire is in contact with the road.


I've owned Fords and now a GM truck. Ford makes a serious truck. But the new GM trucks are pretty nice. They definitely have some issues though. With all the ignition switches GM has recalled, it's amazing how not every single vehicle being made doesn't come with a push button start system and comfort access to keep those massive girl key chains in their purses. Hard to have a ignition gate situation when the cars don't even have an ignition switch! I've been harping on GM about their 1970 keys now for almost 10yrs. Just now in 2014 on my Silverado did they go to a laser cut key. Tell you one thing though, if the 14's still had their older keys I would of bought a Ram. The laser key was a minimum for me. Plus it's hard to stick a screw driver into the column and steal the truck when there is no key slot. GM has a good 1/2 ton, but needs to hire some OCD type A BMW guys to go over it.... My truck has 13k on it. Vibration free. I only notice some vibration when the "free oil change monkeys" pump my tires up to whatever they want. 35 front, 33 rear is the sweet spot I keep them at. I don't haul or tow much normally. If I was towing or hauling a big load I'd up the rear tires to 35 cold. Has anyone actually looked at the contact patch of the rear tires with 35 cold? or better yet the dealers 40psi. After driving 1hr home only about 75% of the tire is in contact with the road.

Posted

Doesn't come close? The 5.0 has 380 torque, 360 HP. The 5.3 has 383 torque and 355 HP. What's not close about that? The Ford actually has a much more efficient torque curve right to peak.

5.3 has over 100ft/lbs tq more at 1500rpm where you need it when towing, and you also might need to know that the more low end tq and a flat curve better then the mountain shape curve the 5.0 has

Posted

Oh, you mean like this?

 

F150dash010215.jpg

 

The 5.0 F150 has more horse power, can tow more, and gets the same or better gas mileage without all the headaches and recalls. I've owned a 14 Vibratorado for 8 months, and a 14 F150 for 4 months. There's no comparison...my Ford gives up nothing to that POS Chevy that GM ripped me off with! By the way....your ignition system was just recalled today. Better take your truck in....AGAIN.

Face it. Ford sucks.

Posted

Face it. Ford sucks.

One more thing ... That instrument and gauge panel looks cheap compared to the Chevy/GMC setup. I was in my buddies 2014 Ford STX and the entire interior is all cheap looking plastic. The new Fords really are junk.

Posted

One more thing ... That instrument and gauge panel looks cheap compared to the Chevy/GMC setup. I was in my buddies 2014 Ford STX and the entire interior is all cheap looking plastic. The new Fords really are junk.

Plus those airvents that swivel all the way around feel cheap as well.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • I don't wanna do major surgery/upgrades, behind-the-dash work, add amps, change radio etc. on my '26 std cab WT. On the WT, it has the base 7" IOR infotainment setup, and only two speakers (doors). Since I listen to classical, looked around for speakers that do well and dug thru reviews. Two-way speakers were found to be better than 3-way. So I've ordered a pair of  Infinity Reference REF-9632IX 2 way speakers.  [These may  or may not have been discontinued / succeeded by the 3-way ...9633 ones.]    These speakers are lauded for 3 ohm and 94db sensitivity spec so they'll work well for ordinary base car radios without amps and offer better performance (quality,  strength) than  default base paper-cone speakers. They'll be installed in a few days and I'll let y'all know what I think. Bill W San Jose      
    • Thanks!   Changed out the rear shocks today to Bilstein 5100s.  So far feel much better. The stock Rancho were wore out.  Lots of heavy hauling (2 moves, home renovations, etc).  Next up is new BFG tires Monday.  Cant wait the current tires have little to no wet traction and are super loud (hum)    
    • Ok, I got the all the codes. What do you all think would be a place to start?
    • How about I just point to the factory pans stand pipe little drain plug and claim its a pan with a real drain plug !. I just couldn't swallow the fact that a Dorman pan which at this point is probably the only pan out there that fits the gas version truck cost that much up here in Canada so I decided initially anyway to skip it and see what I thought of pulling the pan method and down the road if I felt inclined enough then I would either install a drain plug kit in the factory pan if there is enough room for it, or have a bung welded onto it, or put an aftermarket pan on. The thing is if the pan is not pulled then the magnets in the pan can't be inspected and cleaned or if wanting to change out the filter. However of course it certainly would make the job easier to be able to drop the oil first before having to handle the pan if dropping the pan that go around was the goal.    I knew a guy locally that was doing custom field spraying years ago with a pickup pulling a ground driven sprayer, I believe it was a GM pickup with an automatic trans. He had a drain plug in his pan and would drop the oil out of it once a week and top it back up through the dipstick tube to keep refreshing a portion of the oil often and that made the transmission last far longer than had he done nothing. Soft fields pulling 500 gallons of water at the start of each mixed up sprayer tank batch and in low range sucking along. I imagine he got some tips from other custom sprayer outfits doing the same thing at the time and learning from their blown up tranny mistakes. Transmissions then had no lock up converter so would cook the crap out of the fluid slipping that much and it would not have been synthetic fluid either. 
    • 3.39 Kroger’s in Montgomery Texas. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...