Jump to content

Recommended Posts

Posted (edited)

The only way to work it out is to start a BBB case, take your truck in for the amount of repair attempts you are legally required to do in your state, based on lemon law (4 in Michigan), file BBB complaint online, save ALL repair and service paperwork, tell BBB your truck still shakes after "final repair attempt", setup arbitration date, wait for GM to call 1-2 days before your arbitration date and admit defeat, get your money back or new vehicle. This process is 100% FREE, just takes a little time and leg work.

 

There are more details, but this is the only way to get out of this mess. I have (almost) gone through the entire process twice now. They fooled me into taking another truck the first time, not this time...I know better.

 

I test drove a dozen trucks when searching for my free replacement 2015...THEY ALL SHOOK ON THE HIGHWAY. All of them. I couldn't believe it. I ended up picking the smoothest of the bunch...which ended up getting worse as time went on.

Maybe if you had picked the worst one, it would have stopped vibrating after a while. :crackup:

Edited by pm26
Posted

Does anyone notice the rear view mirrors vibrating when on highway?

Posted

Hey Everybody, this may have been brought up but there is noway I'm going through 501 pages to look for it LOL. I have a 14 Silverado and have had a shake issue since new. I've always wanted to take it in but being a project manager for a busy construction company I never had the time or patience to deal with their stupid loaner car.

 

I guess my question is, at 77k miles is it to late to deal with this? I feel like it's now getting worse and am really regretting not taking it in earlier.

 

Anyway, thank you for the help in advance.

Posted

OK it'd been a while since I last posted. With that did I do read these updated posted several times a day.

 

So many different ideas on what the cause is. I have encountered something I haven't seen before.

 

Over the holidays I drove to Massachusetts from Jersey. Still vibrated and I think has gotten worse very recently.

 

One thing I noticed something odd on my trip back to Jersey. For a moment maybe several miles, maybe more then 5 less then 10. The truck drove like it was on glass. It was so noticeable that I was almost in tears, lol.

 

Just a thought, I'll say what I was thinking. It was like whatever magic lottery ticket that I just cashed was something that phased in sync then phased back out.

 

Almost as if from various turns, maybe from the limited slip which changes phasing of the timing of axles and rings pinion that it momentarily BALANCED!!!!

 

When it happened I was on a rather straight portion of road and as it started to slowly curve the vibration came about slowly then progressed. This wasn't a momentary thing or a temporary road condition thing.

 

So I figured I'd throw this out there maybe someone has a thought that would expand using what occurred. Thanks, H.

Posted

OK it'd been a while since I last posted. With that did I do read these updated posted several times a day. So many different ideas on what the cause is. I have encountered something I haven't seen before. Over the holidays I drove to Massachusetts from Jersey. Still vibrated and I think has gotten worse very recently. One thing I noticed something odd on my trip back to Jersey. For a moment maybe several miles, maybe more then 5 less then 10. The truck drove like it was on glass. It was so noticeable that I was almost in tears, lol. Just a thought, I'll say what I was thinking. It was like whatever magic lottery ticket that I just cashed was something that phased in sync then phased back out. Almost as if from various turns, maybe from the limited slip which changes phasing of the timing of axles and rings pinion that it momentarily BALANCED!!!! When it happened I was on a rather straight portion of road and as it started to slowly curve the vibration came about slowly then progressed. This wasn't a momentary thing or a temporary road condition thing. So I figured I'd throw this out there maybe someone has a thought that would expand using what occurred. Thanks, H.

Was there something remarkable about that stretch of the road on which the truck ran smoothly?

Posted

They are having the same shaking issue with the tahoe suburban Yukon Yukon XL and escalade. It's a design issue and people who got a bad product should be compensated. This is ridiculous. STILL!

Posted

They are having the same shaking issue with the tahoe suburban Yukon Yukon XL and escalade. It's a design issue and people who got a bad product should be compensated. This is ridiculous. STILL!

I'm expecting a call back from some attorneys in the next few days, I'll be updating with what I can when I hear from them

Posted

There wasn't anything special about the road. I made sure of that so it wouldn't be the root cause. At first I thought it may have been. The road surface didn't change even after the vibration began again.

Posted (edited)

Found the solution...

 

Dropped it at the dealer and left it for them to fight with. Was so aggravated with the truck I made it down the road to another dealership and ordered a 2016 diesel (in the interest of staying on topic Ill leave the brand out, but its not GM). Picked my 6.2 Sierra up 4 days later and the vibration appears to be totally gone...she knew I stepped out on her and started acting right.

 

In all seriousness, they replaced the rear diff, and re-programmed the power steering computer. My problem seems to be amplified when I am towing or have a load in the bed; one of the techs suggested perhaps the lighter load on the front end was causing the power steering computer to command the pump erratically. Sounds far fetched to me, but kudos to the tech for thinking outside the box; this is after 4 sets of tires and 2 sets of wheels, so I was happy to hear a new theory.

 

So far, it is totally gone. I'm not sure why, and Im certainly not convinced that they actually fixed it, but for the time being its gone.

Edited by CooperS7777
Posted

At the risk of beating the dead horse, 2 weeks ago I could feel the vibrations more... never did anything.

Now today the vibes are significantly less.

 

The difference is 2 weeks ago temps were in the 50's and now temps are 20's.

 

Are the hydraulic mounts stiffer with colder temps? Do we have hydraulic shocks? Are they stiffer also?

  • Like 1
Posted (edited)

I too can say I have noticed the vibrations much more so in warmer weather. I'm up in New England so the past couple months have been especially cool.

Edited by CooperS7777
Posted

+1 for me

 

Been on the highway all day long with a high of 34 degrees and the vibes are virtually gone, truck is smooth as glass right now. Except for the decelerating shake at 50-35

Posted

OK it'd been a while since I last posted. With that did I do read these updated posted several times a day. So many different ideas on what the cause is. I have encountered something I haven't seen before. Over the holidays I drove to Massachusetts from Jersey. Still vibrated and I think has gotten worse very recently. One thing I noticed something odd on my trip back to Jersey. For a moment maybe several miles, maybe more then 5 less then 10. The truck drove like it was on glass. It was so noticeable that I was almost in tears, lol. Just a thought, I'll say what I was thinking. It was like whatever magic lottery ticket that I just cashed was something that phased in sync then phased back out. Almost as if from various turns, maybe from the limited slip which changes phasing of the timing of axles and rings pinion that it momentarily BALANCED!!!! When it happened I was on a rather straight portion of road and as it started to slowly curve the vibration came about slowly then progressed. This wasn't a momentary thing or a temporary road condition thing. So I figured I'd throw this out there maybe someone has a thought that would expand using what occurred. Thanks, H.

Mine has been doing the same thing since 7000 miles or so at 75-80mph. Usually its tires that cause that, when you go go around a curve the inside and outside tires move at a slightly different speed. Every once in a while it all works out and its smooth, and if the road is straight it will stay vibration-free for miles. Mine at its worse is only the jump seat/console vibrating. As long as I dont put drinks with ice in there I dont notice it much.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Welcome back! No, it definitely doesn't pass the sniff test. Even "ceasefire" needs an alternative definition these days.    $5.29 at Kroger today
    • That makes sense, and I think you are describing the real product problem. Capturing data is the easy part. If the owner or technician has to manually dig through five minutes of millisecond-level logs, the product has already failed. The device would be at the ECM harness, not at the OBD port, so I agree that data retrieval and event marking need to be thought through carefully. The way I am thinking about the architecture is: The recorder itself should not depend on a phone, app, Bluetooth, Wi-Fi, or cloud connection to capture the event. It should always keep a local rolling buffer and lock the event locally. A button, phone app, or small cabin device would only act as an event marker. If the driver feels a stumble and presses the button 10–30 seconds later, the pre-buffer has to already contain the useful data. For data retrieval, the practical options would be a sealed service USB lead, Wi-Fi download, or a phone/cabin companion device. I would not expect the owner to remove the ECM-side module or work with raw files directly. The cloud or AI side would be for interpretation, not for capturing the event. The truck may have no connection when the issue happens, so the evidence has to be saved locally first. After that, cloud processing could help decode the data, compare it against baselines, and generate a readable report. For the first version, I would keep the automatic triggers conservative and objective: driver event marker bus-off error passive voltage drop / brownout device reset FIFO or queue overflow a normally periodic message disappearing side-to-side communication mismatch, if the topology supports that For “learning normal,” I agree with your point, but I would not want to overclaim it as automatic root-cause diagnosis at first. A realistic first step would be learned baseline comparison for that specific vehicle and operating condition. For example, a value would only be compared against similar conditions: RPM range load / MAP throttle position gear / vehicle speed coolant and oil temperature battery voltage AFM/DFM state, if decoded and validated Then the report could flag things like: this periodic message disappeared compared with its normal timing this value deviated from this vehicle’s normal range under similar conditions the same abnormal pattern repeated after the same type of event the anomaly occurred together with voltage, oil-pressure, misfire, or communication changes But I would still call that “abnormal pattern detected,” not “replace this part,” unless there is enough validated repair data behind it. So the intended product would not be “here is a huge log.” It would need to be an event package: what triggered the capture how much pre/post data was preserved what changed before and after the event whether the device itself reset, overflowed, or saw a bus error selected graphs around the event raw data only as supporting evidence From your perspective, what would make this kind of report useful instead of just another datalog? For example: What are the top 5 parameters or events you would want highlighted first? Would you trust a learned baseline for that specific vehicle, or would you prefer fixed thresholds? How much false-positive flagging would be acceptable before you stopped looking at the reports? What would a one-page report need to show for an independent shop to take it seriously? For misfire, AFM/DFM, oil pressure, or U-code complaints, what would you want the tool to flag automatically?
    • 2024 Silverado 2500 HD LTZ grille no camera Parts list   84603331 84913656 84913657 84913654 84913655 84911567 84911568 85646092 85646093 85797921 85797922   11570637  x10-15   grille/bumper bolts 11546500  x10      grille clips 11571006  x10      push/retainer clips 11546454  x6       nut retainers 11611609  x6       M5 bolts 11610700  x6       molding/trim retainers
    • And use RA's 5% discount code if you buy from them.  google for the code, one is always available.
    • Just don't turn the steering wheel as much?
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...