Jump to content

Recommended Posts

Posted
21 hours ago, jagabom said:

Agree with you there Ericruiz911.  Sometimes better to take the loss and be happy.  Like you say every day you don't enjoy the truck.  Let us know the outcome.   I've done that with other things in my life. 

For a minute there thought you were referring to my ex-wife, lol!  

I have about 45K miles on my 2015 and have as yet not experienced the dreaded Chevy Shake.  It did however come down with the Terrible Torque Converter Shudder around 30K miles.  Dealer performed TSB and so far no more shudder, fingers crossed.

about tires; I replaced OEM Goodyear Wranglers with Michelin LTX Defenders at about 35K miles.  Have to say truck rides better now.  But, I’ve never been happy with the ride of the truck.  However, it is a 4X4 and is on rear leaf springs.  So, have to take that into consideration.  And, factor in that I’m just getting old and grouchy’er, so I’ve been told, lol.  Being that I don’t have any major complaints other than the choppy ride when crossing tar strips in the road and such I’m going to wait till the 2020 comes out and see how it rides.  I’m of the school of never buy the first year model of anything...

  • Like 1
Posted
46 minutes ago, Bart’s Silverado said:

You indeed got lucky! Good luck with the new truck. Let us know if it shakes!!!

Thanks! Trust me, I am not leaving with a truck until I get up to 85 on the highway with no shake. Even the slightest vibration will be a no for me. My biggest problem is finding one I like because I really hate the look of the 2019's but it looks like I may go with an all black LT trail boss but we will see. I need to see how it rides first.

Posted

Back in the early days of this forum when the posts were coming hot and heavy some of us were betting there would be a thousand pages made before it would shut down.  I’m kinda doubting it will get there.  Traffic has really dropped off.  I know I’ve moved along to the 2019 forum.  Just drop in here every now and then anymore.  Just saying ?

Posted

I will say this...I really think GM has screwed the pooch this time around. I know all the brands have problems(foreign and domestic) And most TRY to make it right, But on this one GM has went out of there way to avoid this problem....lying to dealers and customers, and by forcing dealers to do the same! It seems they really stuck it to there Loyal customers this time. And I strongly believe that they wont be able to wait on the next generation to bail them out

Posted

I have had a few people message me regarding the process so I am just going to post it here. GM is offering me to get out of my truck and into a new truck off the lot. So what's the catch? Well, I am having to pay almost $3000 out-of-pocket for 'usage'. The formula for this is (miles / 120,000 * purchase price). FYI, the purchase price is NOT the price after incentives, its the MSRP without them, go figure. So right off the bat, I am out $3000. I am allowed to trade into a truck with the same, or less, MSRP as my truck when I purchased it. If the MSRP of the new truck is more than my old one, I must pay the difference + taxes on the difference. What sucks is that the all LT models are now in the $50k range with basic options so it looks like I would have to put more out-of-pocket if I want to get into a 2019 with similar options. With that said, I have yet to completely accept the offer because I am trying to figure out how I can make this work without screwing me. Also found out that this process will take about another 2 months so I can't even find a truck on the lot and leave a down payment. I will just have to hope there is a truck I like sitting on that lot in 2 months and is within budget. Because of this, I tried to pre-order a truck with my configuration that also stays within budget. The dealership said all I need is GM to agree to letting me wait on a new truck because the new truck would take 10 weeks to deliver. He said GM has done it before, but its not a common request. 

 

With what I know now, I advise you to open a BBB case ASAP with the lowest possible miles as soon as you feel your truck is a lemon and will qualify for days out of service or repair attempts. I would have saved myself a lot of cash because they go off the mileage you entered during the initial BBB case opening and then lock in that mileage once the is settled. Doesn't matter if you add another 10k miles until you get your new truck, you're locked into the mileage entered on the BBB case during initial filing.

 

Hope this helps.

  • 2 weeks later...
Posted (edited)
On 12/17/2018 at 11:44 AM, Olvim said:

This mirrored my experience exactly. It was balancing all along, and after 7 trips to the dealer and over 40 days in the shop, a Hunter tech got mine right on the first try. My truck is smooth as glass now (2,000 miles and counting). The only thing I feel now is the road on the highway, a slight buzz/tingle in my hands anytime I’m going over 73. The Goodyear SRAs have something to do with that road feel, in my opinion. Mine seem to flatspot overnight in the cold weather here in Michigan and it takes about 10 miles for them to warm up and smooth out. A set of Michelin LTXs should alleviate that when I’m due for new treads, but I’m too cheap to drop $1,000 on tires on a truck with only 6,000 miles. 

 

Either way, in short, mine is WAY better now. I am convinced GM techs have no idea what they’re doing unless something throws a code and tells them exactly what the problem is.

Same here, truck always had a shake around 75ish. Got a little more pronounced after I did a rear flip kit, changed to shorter rear shocks & put on 22's.. Finally after about a year of dealing with it, I decided to take it to my buddy who is a GM tech & has been using the hunter machines since they came out. He road force balanced my cheap Ironman 305/40/r22 tires & I tightened the rear shock bolts up again for good measure. Shake is gone & I dont hate driving my truck anymore.. Buddy said these trucks & the C7 vettes, depending on what suspension setting its on,  are very finicky with rear shocks & needing roadforce balancing.

Edited by MM98
Posted

New member here--Just bought a new 2018 Silverado 1500 W/T model regular cab long bed. Got on the highway to take it home and it immediately started vibrating at about 63 mph and above,felt it in the steering wheel and the center console module. Doesn't always do it at that speed depending on the road surface texture but it does it more than half the time.

   Took it back in for service  with about 200 miles showing on the odometer and they road force balanced the tires and told me to put a couple hundred more miles on it in case the tires needed to round back out from sitting on the dealer's lot,it was manufactured 3/18 and it has General Grabber HTS 255/70/17 tires.

   Service writer said if there's still a problem call them and they will order 3 new tires. I asked him why only 3 new tires instead of 4,doesn"t make sense to make sense to me.

He said that 3 of the tires were near high end of limit but 4th tire wasn't and GM won't let them order it. Also looked like they had one of the "junior" mechanics working on it.

    I've put 250 miles on it since and there's still a problem so I'll have to call them and tell them to order the tires and probably have to argue about getting the 4th one.

I've read the last 20 pages of this thread so I'm not getting my hopes up that new tires will solve the problem. Any suggestions on how to deal with this if the new tires don't do the trick?

    Also noticed that extended or crew cab models seem to be mentioned the most in the pages I've read. Does this problem seem to crop up in the regular cab long beds much ? Other than the vibration problem the truck is pretty much what I've expected for a low end trim model.

 

Thanx,

bumtruck

;

Posted

Ive posted in here before and had the Chevy Shake on my 14 with stock chrome LTZ 20s and stock tires. Went to bilstein shocks no change, went to ko2s and method nv's shake changed but still there. Recently traded that setup for stock 20 All Terrain on Nitto Terra Grapplers and 90% of shake is gone. Cant explain it but truck has never been this smooth at hwy speeds.

Posted

I too have been fighting the shake.  When I purchased the truck it immediately went back for the shake and had two tires replaced that wouldn't RFB.  It helped, but there was still a shake that could be felt above 60.  When I took it in last time for it's first service I mentioned the shake again.  They really screwed up and gave me an '18 LT loaner that had Michelin tires (New OEM's that replaced alternate to the Good Year tires) on it that rode smooth as glass.  I called the Service Writer and told him if they couldn't get the shake out of my LTZ truck and make it ride better than the LT loaner, I wanted the wheels and tires off the loaner put on my truck for a week.  They RFB'd my tires again and I was told 'One had thrown a weight (not buying that line of crap) and one was able to be RFB'd from a 14 to a 10', whatever that means. 

 

Whatever was done, helped tremendously.  There isn't a shake now until I push the truck well north of 85MPH.

 

I'd say definitely stay after it and do not take no for an answer.  Keep having them RFB the tires and maybe you'll eventually get a Tech that knows how to properly use the machine.  

Posted

I actually thought about filling the frame with Great Stuff  haha..   maybe that would dampen things. 

Anyone with vibration issues have problems with the forward shaft (on 4 wheel drive versions)?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • No doubt... But, as someone who doesn't pay for his services, but who has provided a few views/clicks on his Youtube platform, the data around the Mobil oil testing I think does have some value including to "freeloaders" like me.   A lot of what he's doing is likely showing the OE's work in their oil selection, something that many of us had kind of assumed was true all along, a good balance of both excellent protection and efficiency.
    • Lake Speed is drumming up business for his company just by being in the spot-light so he has a vested interest in stoking the 0W-20 fire.  IMO  
    • I knew when I bought my truck that it had off road hill decent or craw control or whatever they call it and rolled my eyes at that but it gets throw on with other options my truck has, I just never had a heads up if the highway speed regular cruise setting had anything to do with the brakes and that took me by surprise. If you've ever been to the top of Pikes Peak and watched those ahead of you on the way down with their brake lights on constantly, one can guess they are probably not gearing down or not enough anyway if their vehicle will allow and a good reason their is a brake check spot part way down where they use an infra red heat gun to check how hot ones brakes are front and rear.    Your right that once one gets out of the front range by Denver and I've not been on that stretch of 285 between Denver and Fairplay myself but I know its high and Fairplay at 10000 feet, Buena Vista at 8000, it drops a bit from there but then your going back up and over the 11000 pass and Durango is at 6500 . So yes your definitely right that 6500 and a lot higher is the theme of going anywhere out in that direction from Denver but hey, the down hill sections give fantastic fuel mileage !.    I don't even look at the fuel pumps for what premium costs here, since I live on a farm and up to this point get fuel delivered I am rarely in front of a fuel pump and when I am, I am often using card lock bulk fuel stations so it tells me what the price is AFTER I buy the fuel. Looking up on gas buddy and converting to US gallons but in Canadian dollars, regular on average of the prices listed was around 5.95 and premium is around 7.00 . That was one reason I did not go for the 6.2 half ton aside from its lack of carrying/towing if one was going by the rule of using premium fuel and until recently one could only buy regular farm gas if playing the few cents off game for farm dyed fuel for a "farm licensed pickup". But yes I hear you on the fuel price difference and like the diesel theme with it often being more expensive then gas it doesn't have quite the charm to it either as it once did although right now here for some reason the price of diesel has come down more so its now inline with the price of regular gas. 
    • I agree with this assessment. As you know I’m testing longevity with vehicles for the first time. I have a few vehicles I passed to kids and grandkids. We’re all past 100K miles some approaching 170K. I’m the only one doing 5k oil changes. The rest whatever the minder says. I’m the only one doing frequent transmission service. My odyssey the trip vehicle at 200K will be finished as a trip vehicle. I recently changed to high mileage oil, Valvoline. I can’t get past the fact that all manufacturers want to claim long service life. I just don’t make sense that they would go with low weight oil for mileage. While sacrificing longevity.
    • There's absolutely a mountain of profit in catering to the "I do my own research" crowd, people who are certain they know better. And I don't mean there isn't data to support that 0w40 produces less wear product than 0w20 in an engine like the 3.0 Duramax, that only feeds them the assurance they need. Again, my whole thing with oil selection is, sure, 0w40 or 0w30 produces less wear product. Are we talking the difference between the engine lasting only 100k versus 200k? Or are we talking more like, if the engine will already go 350k on a good 0w20 regimen recommended by the OE, is using 0w40 going to get us to 355k, assuming we can even get the rest of the truck to last that long, meanwhile sacrificing the first 5y, 100k in powertrain warranty. The answer isn't easy, there are tradeoffs.   I willfully use 0w20 Dexos D for this reason, knowing that a 0w40 will produce slightly less wear. I don't believe the delta in wear product is meaningful over the lifetime of the engine, and I place much more importance on driving style and overall feeding and care of the engine as a whole. It's the mentality that someone can abstain from alcohol their whole life which is an amazing boost to health by itself, theoretically. But if they're sedentary, that lifestyle choice will most likely kill them young despite their other, concerted efforts. Maybe someone doesn't drink AND they are the perfect picture of health and activity AND they use 0w40 AND they treat their engine perfectly. If living until 130 years is the goal, sure, do that. But it's going to be a really old truck falling apart around a good engine for that last 30 years, without a doubt.   I watched Demonworks' other video on the 100k+ 3.0 Duramax that had dealer 0w20 changes on what appears to be OLM-prescribed intervals (8-10k).   The QR codes are still present and readable on the main bearings. That's how little wear it has.   That's not proof that anyone else should stick to 0w20, but it's confirmation, for me, that 0w20 is perfectly acceptable to use in these engines.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...