Jump to content

Recommended Posts

Posted
22 hours ago, epstein said:

did your vibration come back after the axles and driveshaft were replaced?

 

 

Brian 

No mine is good . Center console just shakes on bumpy roads now going to do a center console swap soon . 

Posted

2017 RCSB Silverado 1500 4x4----On my 3rd set of tires now..  It's NOT the tires!  GM needs to make this right as I'm a loyal GM product buyer/user BUT I will change hats if they keep dragging this on.  Get me a new STEEL driveshaft and we can go from there.

Posted

HA.  What makes you think your loyalty to GM means anything to them?  You are replaceable. 

Posted
Valid point.  Customer service appears to have gone out the window in the name of shareholder return.
 
Yeah about 15 yrs. ago.

Sent from my SM-T580 using Tapatalk

Posted

I just took my 2018 Silverado 1500 back to the dealer for this vibration issue They replaced the torque converter a few weeks ago with no relief Can't wait to see what they come up with this time

  • 3 weeks later...
  • 3 weeks later...
Posted

Just a little update on the truck because i have had a few guys message me and ask . Truck has been very smooth still since changing the driveshaft to a new aluminium one piece and swapping in the Yukon axles . 

Had my tires road force balanced last week because i lost some wheel weight off-roading and what a difference that has made truck feels smoother now then the day i bought it .

 

Hope this helps others . 

  • Like 1
  • Thanks 1
Posted
On 8/5/2013 at 8:11 AM, ChevyTech77 said:

Either the tire/wheel assemblies have excessive radial force variation, the rear driveshaft (propshaft) is out of balance or the right side engine mount needs to be shimmed 3 mm. Those are the only vibration issues that I have seen with a K2XX truck.

Can you tell me what is the test to determine if you need a 3 mm shim for the engine mount?   

Posted
What I find interesting about this issue is that some days, I take the same road, go about 78-80 mph and have major vibration.  Other days, same road, same speed and NO vibration.  Is it possible that road heat, heat outside, etc can play a role in how much vibration there is?  The other night I had none but previously that day on the same road during the day I had the normal (what I am used to) vibration.  Just curious if mine is the only one that is intermittent.

My 14 Denali is the same way. Sometimes it’s great sometimes it shakes really bad. Same roads. I just got my truck back from the dealership. I replaced the tires, pad, rotors and CV joints before taking it into the dealer. From my experience they will place blame anywhere they can. Perfect example they told me my new tires were the problem. I told them no it’s the exact same vibration as before new tires. They replaced quite a few parts in the trans and it still does the same thing.

 

I just noticed they said my tires were starting to cup. The new tires didn’t even have 300 miles when I took it to the dealership. My old tires didn’t wear uneven or have cupping. Frustrating.....

 

d37c7ae1253ec27d96faddce6d77b821.jpg

 

dc375b9b405399b2ea2707fe31862548.jpg

 

 

Sent from my iPhone using Tapatalk Pro

Posted
40 minutes ago, da90 said:

My 14 Denali is the same way. Sometimes it’s great sometimes it shakes really bad. Same roads. I just got my truck back from the dealership. I replaced the tires, pad, rotors and CV joints before taking it into the dealer. From my experience they will place blame anywhere they can. Perfect example they told me my new tires were the problem. I told them no it’s the exact same vibration as before new tires. They replaced quite a few parts in the trans and it still does the same thing.

 

I just noticed they said my tires were starting to cup. The new tires didn’t even have 300 miles when I took it to the dealership. My old tires didn’t wear uneven or have cupping. Frustrating.....

 

d37c7ae1253ec27d96faddce6d77b821.jpg

 

dc375b9b405399b2ea2707fe31862548.jpg

 

 

Sent from my iPhone using Tapatalk Pro

That's ridiculous!  They're brand new!  The sad thing is, when I bought mine new in June 2016, I bought some used rims and thought the vibration was due to a bent rim.  So I bought a whole new rim and still had the vibration and got rid of the tires and the wheels thinking that would solve it (before I knew about the vibration as an issue for most of us).  Now I run  new black 22's and tires and was convinced I screwed up something on my side because of the whole rim issue and it's something GM didn't do right.  And because I didn't know it, I never asked for anything to be done, I thought it was my RIMs.  I am hoping for enough complaints that they'll be forced to do something.  Until then, I will just keep driving it, vibrations and all!

  • Like 1
Posted

2016 1500 Z71 Chebby…. dealer told me the vibe was from the "aggressive" tread of the Bridgestone Duelers.  Aggressive tread?!?  WTF, apparently he believed I just fell off the cabbage truck.  Needless to say, no resolution to the problem.  Good thing is (I guess), the truck only rarely vibrates.  And only at highway speeds after driving for 20-30 or so minutes.  Something, maybe the tires (not aggressive tread related), gets warmed up and causes or leads to the vibration.  Prolly will be my last GM product after 50 years of GM for 95% of my vehicle purchases, unless they step up.

  • Like 1
Posted

Just took mine back to the dealer for shaking between 40-75 mph 2018 LTZ 5.3  6 speed  2wd So far the dealer has in this order changed the torque converter. changed the motor mounts. road force balanced the tires. scratched up one of the aluminum rims. changed trans fluid and replaced scratched up rim The shake is exactly the same as the first time I took it to them. I dropped the truck off this morning for another round

IMG_6655.JPG

Posted (edited)
2 hours ago, Rick Murphy said:

Just took mine back to the dealer for shaking between 40-75 mph 2018 LTZ 5.3  6 speed  2wd So far the dealer has in this order changed the torque converter. changed the motor mounts. road force balanced the tires. scratched up one of the aluminum rims. changed trans fluid and replaced scratched up rim The shake is exactly the same as the first time I took it to them. I dropped the truck off this morning for another round

IMG_6655.JPG

I would ask them to check the run out of the driveshaft and or the rear axle shafts . 

Edited by Kylebr1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • I am guessing that engines of that design back then had a better ability to be abused and survive longer than a new design engine with the long timing chain and the overhead cams and phasers etc. But I would never guess that an engine could go that far and not fail spectacularly or at least die a slow death. 
    • In the 80's 90's I'd run Honda's 7,500 miles between changes using Red Line HP 5W20 and do it for hundreds of thousands of miles with issues. Back in the day it was an SAE 20 with the HTHS of a SAE 30 and SN add load. It was also very polar. Oxidation VOA was over 120. Besides those motors were SPFI and lean burn tech. I could have likely run it longer but never did.    We had a Toyota bought new I ran on Pennzoil's latest and greatest synthetic of the day with "Penthane". A made up word for a very low dose of PAO. Tried 7,500 mile OCI's in that Group III/VI chemistry and the rings tapped out at 90K. Rocker box wasn't as bad as the one Punch put up but it wasn't good either. Also a SPFI motor.    I'm around 3,750 across the board on these GDI monsters and the oil it tapped out by then usually on TBN/TAN crossover and color. Red Line HP Euro.    The AMSOIL SS brochures tell you to follow the OEM values for the service class but that it can be run up to 25K if monitored. I can't imagine what motor could go that distance and not tap out. I've never owned one.    Yes, I know. Lot's of people do. I'm just not going to be one of them. 
    • I knew a guy in the early 80's that bought a new Monte Carlo and ran it a 100,000 miles without ever changing the filter or the oil. Just kept adding. It looked like that inside.     
    • Good evening. I was lucky enough to get passed down to me a 2007 GMC LBZ that was my great uncle's. While the underside and rockers are more or less gone I feel like with time I can restore it to working order since it only has 110,000 miles and he put nearly every option he could get without getting the new body style since he did not trust DEF. So far I have done everything I can think of but when I put the key into the ignition nothing happens. I put 2 brand new batteries in it. Cleaned the terminals. Check all the fuses and relays and they all pass with my multimeter. I know I'm missing something that I just cant think of. The only odd thing is the OBD2 port works which makes me think its not the mega fuse. Any advice would be greatly appreciated. 
    • Looks nice. I still have my 2000, 1500. Bought a 2025, 1500 for retirement. Feels solid. These trucks have a bad rap on the internet. My brother has a `24 1500, 5.3 with 52,000 miles. No problems at all. Mine hasn`t either but mine`s only at 12,700 miles. Have seen some of these things with 100,000 miles with no problems.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...