Jump to content

Recommended Posts

Posted

The way silver spaceship described the vibration on his truck is exactly the same way my truck is behaving down to the tee almost sounds like he is describing my truck. And he is right it dose not always vibrant something triggers it, and I know it's the truck because I have tried the same stretch of road with my wifes Tahoe at the same speed and it doesn't vibrate. By the way I have had up to 4 people lots of times with me in the truck and sill dose the same thing. At first I thought it was just me but after reading silver space ship comments and describe exactly what I was going through, now im not crazy lol. What dose it take to get this truck switched out for another one dose anyone know? Or am I SOL on this one? Y do I have to pay 50k for something that is give me headache what can I do about this?

  • Like 1
Posted

It's possible that the weight has nothing to do with it I just thought to my self on the way home what changed and that's the only thing. It might ride just fine tomorrow, it's unpredictable. One thing is for sure after having a engeneer test drive it and say its normal the dealer isn't going to do anything about it and I can't blame them. Plus the one I test drove did it too, I would say not quite as bad but very close at times.

Posted (edited)

I too have this problem on my 2014 silverado w/5.3 4x4 z71. Wicked vibration while towing an aluminum open trailer with two atvs. None under normal conditions nor when hauling a 4000 lbs camper. Trailer doesn't vibrate behind other trucks. During lunch I happened to sit next to two service technicians. They said their is a known prop shaft alignment problem with no know fix that they were aware of. If I am thinking about this correctly a light load squats the truck just enough to create the problem. But a heavy load makes it hard to notice. I love the truck but sledding season is on its way, got to get this fixed soon.

 

Oh that trailer is about 500 lbs plus another 1000lbs of atvs. Creating about 200 lbs of tongue weight. Vibration gets real bad at 55mph.

Edited by Szyikowski
  • Like 2
Posted (edited)

I have this very same issue on my 2014 Sierra 2WD. I may have a solution (theory) to why it seems to go away sometimes and return other times. I have noticed that on my truck the vibration will get better or worse as I am turning at highway speeds starting at about 65 mph and continuing upwards of 80 mph. I noticed the vibration one weekend on a trip and got the tires balanced the following weekend. The problem seem to be actually worse than it was when I took it in, so I started to really pay attention to it. I started noticing that it would be better occasionally and then worse. I hit a really long bend in the road and that is when I experienced the reason, at least on my truck, why it seems to be better/worse. I felt the vibration cycle from almost gone to really bad and then back to almost gone. It appears that there is a balance issue between the right and left wheels. As they turn at different speeds while turning, they are able to align with each other producing more vibration or offset from each other canceling out the vibration. It never totally goes away on my truck, though. I haven't taken my truck into the dealer yet but I plan on taking it in next week to see if they can check some things out.

 

On the weight subject, I almost daily haul around 4 other guys during lunch and still have the vibration though the speed in town is only 65 mph so I can't say if it is worse or better with the weight since it is only starting to vibrate at that speed.

 

Edit: I forgot to add that I have since had my tires balanced twice with no change to the vibration.

Edited by thehad
Posted

I had a '12 Grand Cherokee, that did the same thing. It drove me nuts. The dealer said that it was supposed to be that way. I think they just couldnt figure it out. I got tired of fighting with them so I traded in on my '14 silverado.

 

I have the LTZ and the ride is super soft, rides like a 80's caddy

Posted

So after not hearing anything from my local dealer for 9 days i decided to call and see what's the status on my truck. The rep told me that a Chevrolet engineer came down to check the truck. The engineer said it was the drive shaft and order a new and improved drive shaft and gets installed next Thursday, this will be the third drive shaft they put on. The engineer said he was going to put it on and test drive it him self so let's see how that goes.

Posted

So after not hearing anything from my local dealer for 9 days i decided to call and see what's the status on my truck. The rep told me that a Chevrolet engineer came down to check the truck. The engineer said it was the drive shaft and order a new and improved drive shaft and gets installed next Thursday, this will be the third drive shaft they put on. The engineer said he was going to put it on and test drive it him self so let's see how that goes.

Hello,

 

I am happy to hear that the dealership is resolving your vehicle issue. Please keep us inform if you are satisfied with the repair.

 

Safe travels,

 

Jennifer T.

GM Customer Care

Posted

I just had my tires rotated today and the vibration is still in the rear of the truck. The only thing that I can think that it is now is the axle. I will be taking the truck into the dealer next week to have it looked at. I will keep you all posted on what they come up with and if it helped or not.

  • Like 1
Posted

Well, the dealer replaced the driveshaft Friday. Didn't do anything to help the problem. Maybe the 2014 Chevy's are supposed to vibrate.

Posted

I haven't experienced any vibration, certainly hope they figure it out!!!

 

Mike

Posted

And now it's on the back of a wrecker headed back to the dealer. Surging won't get over 30 mph. This has been one hell of a new vehicle experience.

Posted

Just curious, those who have the vibration what wheels do you have? I drove one with 20's and it felt different than the one I bought with the 18's.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • I've been eyeing an upgrade to my tonneau cover for a bit now.  Intrigued by the BAK MX4 EZ-Lift with the torsion spring and went for the upgrade.  Thoughts and musings during unpacking, install and a few days of usage.   Once my order went into Realtruck, it took about 4 days to ship.  Unfortunately, FedEx Ground destroyed the box and contents and it was unusable upon receipt.  To Realtruck's credit, one email with pictures and an RMA was sent to me to send the first one back, and another unit was shipped out.  It arrived 3 days later, unscathed.   I opened the box and it looked like every other BAK MX4.   Biggest differences are the rails and retaining clamps, and of course the spring attached to the cover itself.     NOTE - if you are upgrading from a MX4 to the EZ-Lift, you will have to replace the rails.  The EZ-Lift rails have a notch cut in them to allow the new style retaining clamps to fit properly.  The new retaining clamps also have 2 knobs/carriage bolts and there are two tracks underneath the front panel. The strap clips are mildly different (more like the Undercover Flex clamps) in that the screws go in from the underside.  Personally I prefer these over the BAK clamps that use the nutserts that are a nuisance to install.  The remainder of the parts in the box (drain tubes, rail clamps, and bumper pads) are standard issue BAK.     I did not replace my front bed seal at the time because it seemed to be in decent shape.   BAK recommends shims on the GM trucks unless you place the clamps on the flanges about 1/3 of the way in from both the front and rear of the bed.  I shimmed the front and the middle, and initially placed the clamps equidistant.  This also turned out to be a mistake, because when I set the cover in place, the new style retaining clamps wouldn't clear the front clamp.   New style clamp inserted in the track:     And the issue which occurred because the front rail clamp was too far forward:     Once I removed the shim from the front of the bed, and slid the clamp back to the front flange, everything cleared fine.     The cover set on the rails without issue and I installed the strap clamps.  After I completed my adjustments, I pulled the pin to activate the torsion spring.  Mistake #3 on my part.  PULL THE PIN AS THE VERY VERY VERY LAST STEP!  The reason is, once you pull the pin, the torsion spring is activated.  If you have to loosen the front clamps and adjust the cover, the front panel will - by virtue of the spring, refuse to lay down.  The only way to get it to lay down so you can reinstall and tighten the clamps is to fully open the panel against the back of the cab, which will then allow the front panel of the cover to lay down and be tightened.  Not a big deal unless you haven't installed the foam pads yet (typically the last step) because minus the foam pads, you will need to place something between the frame of the cover and the back window so it doesn't get scratched.  The next time I install one I will install the foam pads before I pull the pin and activate the spring.   After using it for a few days:   The spring assist is great.  You literally can open it with one hand.  My shoulders aren't getting any younger and this was part of my motivation to swap out. The second panel latches and unlatches itself as you open and close the cover.  Neat in concept, however it took me a minute to get used to closing the cover and not hearing the "latching" sound that would tell me it was locked in place. The paddle handles are a huge upgrade and I wouldn't be surprised to see them become the standard across the Realtruck line.  They effectively eliminate the concern that a thief could coat hanger the cover open and get to the contents in the bed. I'm not sure why the very front panel on my cover has a different finish from the other 3 panels.  I have a request into Realtruck to find out if mine was not manufactured properly or if it was by design.   All in all I'm pleased.  Same level of protection, looks good, keeps stuff mostly dry (they all leak around the tailgate) and easy to install.
    • Same here, first I bought a few filters to get me going right after I bought my truck to do some short distance initial oil changes, then realized I could buy a case lot for less as they drop the price if filters or trans oil etc is bought by the un opened case lot as well as the discount for buying the vehicle there. So I have filters for a while but its good to know going forward, knowing to expect it to be a different part number and looking filter at the dealer and not be confused over it and think they are handing me the wrong part.
    • Saw Inglewood was in the National New last night for hail. Allot of hail. front end loader level hail. 😱
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...