Jump to content

Recommended Posts

Posted

Been about 19 months now since I joined the forum and bought my truck. Been quite a few months since I've been on this topic. 585 pages now. wow. I have 44k on my '14 and it vibes at 77+. Usually only if it's hot or in the sun. At night and early morning's it's much better. My truck took a while to start, but it does. 30k it started. Thankfully mine is not "bad" like some i've seen on youtube. Guess I'm lucky in that regard. Figured I'd check in and see if there is a true solution yet. Guess not.

  • Like 1
Posted

It's so frustrating , I find the 2016 GMC Sierra Denali a beautiful truck and would love to buy one. But due to the vibration problems, I'm scared to make that decision. It must shipped to Europe, so I don't have any warranty from GMC, only from the dealer.

Posted

Snide comment aside, your comment actually proves a point I've tried to make all along. Everyone feels vibration to a different extent. One person may feel a small vibration and consider it uncomfortable while another will not feel a much larger amplitude vibration. You're Harley example is 100% proof of that....typical Harley owners obviously don't find that amount of vibration bothersome, yet many folks would find it quite objectionable. (I wonder what the Picoscope would measure on your favourite hard-tail!)

That said, most owners of these new generation GM brand pickups previously had GM brand pickups, and most almost immediately noticed an elevated vibration that was not present in their previous truck, and was bothersome. That's what brought them to this website. I truly believe most people on this thread did not sit down one day and go "gee, I wonder if I can go find an issue with my truck on the Internet and tie up dozens or hundreds of hours on it". Sure, there are always a few bored ramble-rousers with nothing better to do than stir things up. But I believe most folks on here simply want a vehicle that's at least as smooth as the one they traded in or sold!

Posted

Why hello Wench, how ya been? Thought you were going to buy go a Ram and move on! Don't tell you went and bought "another GM"? NO! Tell me it ain't so! Just can't let this forum go can you? Haha!

 

At any rate, glad I could help you explain what you were unable to after how many hundred posts? Well, let us know what you're driving now, vibration free no doubt, lol :)

Posted (edited)

I'm in the process of finding a local shop that has a on-vehicle driveshaft balance machine. That might help balance out even the pinion or diff a bit. I measured my drive line angles a few months ago and still to this day believe they are wrong. I work a crap ton of hours and when I called the dealers and they said GM does not make shims for the rear leafs.... I kind of put that issue on the back burner and went on to my catch can and 45k drive line fluid changes. I will be re-visiting the drive line angles. I've custom built axle swapped trucks and my rock crawler ran smoother on the HWY than my '14 silverado. I think this whole vibration issue is a cumulative issue. Stiffer frames, stiffer suspension etc. Then you throw in not very tight tolerance on QC for the parts (IE driveshafts, R&P's etc) and you have a vibration. I plan on doing two things. 1- make sure the driveshaft is balanced and my own eyes witnesses it. 2- correct the drive line angles. And when I'm due for new tires at 75k, I will as always personally witness the Hunter 9700 RF Balance. Beyond those items it will become too time consuming to chase.... and mine is not that bad. Just slightly annoying.

Edited by FL335i
Posted

If you ride around all day, every day, at 80 mph constantly looking for a vibration maybe. Do these trucks vibrate at all speeds, from 1 to 77 mph? Or just 78-79-80 mph?

My engine is rough, so that alone adds to the vibration in mine. I have tried a few different brands of fuel system cleaner, and this past weekend even added a double dose to my tank before traveling 400 miles on the mass pike & NY thruway and back another 400 miles on those same roads. None of that has helped the rough engine. In addition i have excess vibration at multiple speeds, yes the worst is around 76-80 mph, but I have a critical points at 46, 56, and 67 mph. why? I have no idea. I took a new video of the water bottle test while on this trip to show the vibration after GM has now claimed my truck is now fixed.... well you wouldn't be able to tell the difference. In addition, I tested the water bottle on transmission tunnel, and it was perfectly smooth, so based upon previous comments my vibration is from the rear of the truck.

 

Mine vibrates randomly in the 30s then stops and picks back up around 70-85 ish. Damndest thing. Heck sometimes on long nonstop trips it will vibrate at 80, then go away midtrip but return before i ever stop but still going 80 ( we have toll roads with 80-85 mph limits here).

 

 

Sent from my iPhone using Tapatalk

I havn't noticed it going away, but I have noticed that it gets worse when going around curves or on inclines.

 

Snide comment aside, your comment actually proves a point I've tried to make all along. Everyone feels vibration to a different extent. One person may feel a small vibration and consider it uncomfortable while another will not feel a much larger amplitude vibration. You're Harley example is 100% proof of that....typical Harley owners obviously don't find that amount of vibration bothersome, yet many folks would find it quite objectionable. (I wonder what the Picoscope would measure on your favourite hard-tail!)

 

That said, most owners of these new generation GM brand pickups previously had GM brand pickups, and most almost immediately noticed an elevated vibration that was not present in their previous truck, and was bothersome. That's what brought them to this website. I truly believe most people on this thread did not sit down one day and go "gee, I wonder if I can go find an issue with my truck on the Internet and tie up dozens or hundreds of hours on it". Sure, there are always a few bored ramble-rousers with nothing better to do than stir things up. But I believe most folks on here simply want a vehicle that's at least as smooth as the one they traded in or sold!

yes, couldnt have said it better myself.

 

This is me. Id love to not have to jack with this headache. My '12 GMC i traded in had no issues. I miss that truck

 

 

Sent from my iPad using Tapatalk

It's fun isn't it? lol

  • Like 1
Posted

Drove a friend's 2016 F150 recently, reminded me of the ride in my 2012 Sierra. My 2014 Sierra can't compete for ride quality. When I traded in I had no idea that the Sierra redesign was going to leave me wanting my old truck back. I think GM screwed the pooch when they updated the Sierra.

  • Like 1
Posted

My engine is rough, so that alone adds to the vibration in mine. I have tried a few different brands of fuel system cleaner, and this past weekend even added a double dose to my tank before traveling 400 miles on the mass pike & NY thruway and back another 400 miles on those same roads. None of that has helped the rough engine. In addition i have excess vibration at multiple speeds, yes the worst is around 76-80 mph, but I have a critical points at 46, 56, and 67 mph. why? I have no idea. I took a new video of the water bottle test while on this trip to show the vibration after GM has now claimed my truck is now fixed.... well you wouldn't be able to tell the difference. In addition, I tested the water bottle on transmission tunnel, and it was perfectly smooth, so based upon previous comments my vibration is from the rear of the truck.

FYI all the fuel system cleaner in the gas tank will not clean the intake valves or throttle body on a direct injection engine. If your rough running engine is due to dirty intake valves or throttle body, those need to be cleaned manually. The TB can be removed easy and thoroughly cleaned with TB cleaner. You can then wipe out the inside of the intake. Then once you have the TB reinstalled you can use a good deep cleaner into the intake tract to clean the intake valves. I like Seafoam spray every 10000 miles or so. And in my opinion, a catch can system should be standard on all direct injection engines.

Posted

Snide comment aside, your comment actually proves a point I've tried to make all along. Everyone feels vibration to a different extent. One person may feel a small vibration and consider it uncomfortable while another will not feel a much larger amplitude vibration. You're Harley example is 100% proof of that....typical Harley owners obviously don't find that amount of vibration bothersome, yet many folks would find it quite objectionable. (I wonder what the Picoscope would measure on your favourite hard-tail!)

 

That said, most owners of these new generation GM brand pickups previously had GM brand pickups, and most almost immediately noticed an elevated vibration that was not present in their previous truck, and was bothersome. That's what brought them to this website. I truly believe most people on this thread did not sit down one day and go "gee, I wonder if I can go find an issue with my truck on the Internet and tie up dozens or hundreds of hours on it". Sure, there are always a few bored ramble-rousers with nothing better to do than stir things up. But I believe most folks on here simply want a vehicle that's at least as smooth as the one they traded in or sold!

 

 

Totally. My 2011 Silverado was flawless. I did NOTHING to it. Worst thing I ever did was trade it in for the 2014

Posted

FYI all the fuel system cleaner in the gas tank will not clean the intake valves or throttle body on a direct injection engine. If your rough running engine is due to dirty intake valves or throttle body, those need to be cleaned manually. The TB can be removed easy and thoroughly cleaned with TB cleaner. You can then wipe out the inside of the intake. Then once you have the TB reinstalled you can use a good deep cleaner into the intake tract to clean the intake valves. I like Seafoam spray every 10000 miles or so. And in my opinion, a catch can system should be standard on all direct injection engines.

Yea, I've seen a number of people say that, however I have seen a few people say that the system cleaners had helped some, so I just wanted to give it a shot.

Posted

My '14 Sierra Z71 5.3 with factory 20" wheels also developed the dreaded 72 mph shake at around 17,500 miles. Bought some new tires, didn't completely cure it but improved at first, then, slowly got worse and worse up to 24,000 miles... Had my tires rotated, re-mounted and road-force balanced to .000, thinking that would surely do the trick. No dice. After reading so many articles and posts about the issue online, I solved my problem. Deciding I wasn't going to embark on a mission of back-and-forth to the dealer to try and have them diagnose and cure an obvious systemic design flaw, I traded in the "Black Bueaty" on a new F-150 Platinum 3.5 Ecoboost FX4. Love the new truck and all the technology Ford stuffs into it. Apologies to all you die-hard GM guys but, it's built in Michigan, not Mexico and, so far anyway, it's a fantastic truck. Good luck to those of you still seeking a cure for the bad-vibes. Sincerely.

 

I'll plan on popping back in from time to time and check on how everyone's making out...

 

Best regards,

Vance

 

post-126477-0-56140200-1462903483_thumb.jpg

post-126477-0-80082000-1462903484_thumb.jpg

post-126477-0-81378400-1462903485_thumb.jpg

post-126477-0-56140200-1462903483_thumb.jpg

post-126477-0-80082000-1462903484_thumb.jpg

post-126477-0-81378400-1462903485_thumb.jpg

post-126477-0-56140200-1462903483_thumb.jpg

post-126477-0-80082000-1462903484_thumb.jpg

post-126477-0-81378400-1462903485_thumb.jpg

post-126477-0-56140200-1462903483_thumb.jpg

post-126477-0-80082000-1462903484_thumb.jpg

post-126477-0-81378400-1462903485_thumb.jpg

  • Like 1
Posted (edited)

2015 crewcab 4x4 5.3L shortbox.

 

Mine's smooth as glass - or so I thought. Speed limits around me are 55-60 most everywhere.

Was going 70+ the other day and suddenly found the vibration. Had to slow to about 55 for it to go away. Could then go back up to 65 no issues.

I don't know what to think about that - but sounds like im wasting my time with the dealer and balance.

Since its not going to arise often for me, and 99% of my driving is 65 or less I can live with the situation. When I noticed it, I'd say it was a mild imbalance kind of level. Noticable to annoying., esp. if day to day you had to drive 70 on an interstate. 4-5 out of 10, where 10 is sell the dam truck. If I had it constantly at the speeds I drive I'd be upset - so i can feel for those who live in a different area.

Edited by 15silver
  • Like 1
Posted

My '14 Sierra Z71 5.3 with factory 20" wheels also developed the dreaded 72 mph shake at around 17,500 miles. Bought some new tires, didn't completely cure it but improved at first, then, slowly got worse and worse up to 24,000 miles... Had my tires rotated, re-mounted and road-force balanced to .000, thinking that would surely do the trick. No dice. After reading so many articles and posts about the issue online, I solved my problem. Deciding I wasn't going to embark on a mission of back-and-forth to the dealer to try and have them diagnose and cure an obvious systemic design flaw, I traded in the "Black Bueaty" on a new F-150 Platinum 3.5 Ecoboost FX4. Love the new truck and all the technology Ford stuffs into it. Apologies to all you die-hard GM guys but, it's built in Michigan, not Mexico and, so far anyway, it's a fantastic truck. Good luck to those of you still seeking a cure for the bad-vibes. Sincerely.

 

I'll plan on popping back in from time to time and check on how everyone's making out...

 

Best regards,

Vance

 

attachicon.gifIMG_3617.JPG

attachicon.gifIMG_3618.JPG

attachicon.gifIMG_3619.JPG

Sharp truck!
Posted (edited)

http://www.autoguide.com/auto-news/2016/03/the-mysterious-chevy-shake-is-affecting-pickup-trucks-now-too.html

 

This Article came out March 2016, Proof & fact that there is a vibration issue in these trucks. End of discussion to the trolls on here. Don`t give the trolls on here any responses, because there trolls=idiots! And the moderator or owner of this site don`t care for your problems either. They love trolls, They want more image counts on the ads, and clicks. Your feeding the wrong helpers. Take it to your state Attorney Generals Office period.

 

Goodbye GM-Trucks .com troll city!

Edited by Gambit66

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Can you sample the pooled liquid, enough to confirm it is oil?   ...That its not fuel or coolant.   Also, make sure combustion gases aren't entering the cooling system.   Simply put, either oil being pushed up past the rings (this really isn't possible), oil leaking past the head gasket, oil leaking past the valve, oil entering through the intake air path. If none of this is likely - it may not be oil.   What could be likely is the fuel injector leaking down. A puddle of gas would still smoke and rough idle. (Same cylinder has the same problem after injector replacement?)   What is the crank time first thing in the morning, when the puddle would be present? Does it seem like the high pressure fuel pump needs an extra second or two to rebuild the pressure that injector 8 may have let bleed off? Check the fuel pressure via a scanner prior to starting the engine.    
    • Good information!  I didn't know about the dementia aspect and asked for a general for my second knee. I'd heard that recovery room time is usually shorter with a general.   The anesthesiologist talked me out of it and I had the spinal.  Inconvenience and/or discomfort is a small price to pay for reduced risk!
    • This is for those over 70 years of age contemplating joint replacement surgery involving general anesthesia. Even some 55 yrs. ago when I took my pharmacology class the dangers of developing dementia in the elderly that had general anesthesia were beginning to be recognized. Over the years there has been some refinement in the cautionary warnings, avoid general anesthesia if possible if you've had close to 10 priors, especially over the age of 70 and/or a family history of dementia. I'm not including the twilight anesthesia induced by propofol often used in cytoscopies or colonscopies. Seriously think about seeing a neurologist and undergo cognitive testing before proceeding if any of those criteria apply to you. Spinal anesthesia may be an option in some cases. I'm in the above camp and although I could use a new right knee, I get fidgety according to a prior orthopedic surgeon when the bone saw spools up or maybe it was the smell of saw blade meeting bone, anyhow I may have one general anesthesia left in me which I will pocket for now and I'm choosing mind over mobility, anyway where did I leave my damn cane!
    • We understand your frustrations with your auto start/stop, fuel gauge and cruise control concerns since your latest update, @LarT-26. You mentioned getting repairs completed, however, have your concerns been resolved? If not, we would like to learn more so we may explore the best path of assistance moving forward alongside your local dealership. When you have a moment, please visit: https://s.gmc.com/support-request and complete the request form with all pertinent details. This will help us to better understand your concern and ensure that it is routed correctly. We will keep an eye out for your outreach.
    • We understand your frustrations with being unable to open your Sierra’s top inner tailgate, @smitty81503. Your concerns are frustrating, and we would like the opportunity to explore the best path of assistance to pursue their resolutions. There are many different factors that could be the root cause of vehicle concerns, and we handle each one on a case-by-case basis. When you have a moment, please visit: https://s.gmc.com/support-request and complete the request form with all pertinent details. This will help us to better understand your concern and ensure that it is routed correctly. We will keep an eye out for your outreach.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...