Jump to content

Recommended Posts

Posted

If you were to remove the 400 some odd pages of non-relevant pages of nothing but B.S. you might find the .05% percent of Shakers out there........I have 40k shake free, problem free miles I guess i just got real lucky.........

  • Like 2
Posted

If you were to remove the 400 some odd pages of non-relevant pages of nothing but B.S. you might find the .05% percent of Shakers out there........I have 40k shake free, problem free miles I guess i just got real lucky.........

I agree.............................

Posted

Son in law has a 2016 with same drive train. He has the trans issue but not the shake or vibration.

Posted

If you were to remove the 400 some odd pages of non-relevant pages of nothing but B.S. you might find the .05% percent of Shakers out there........I have 40k shake free, problem free miles I guess i just got real lucky.........

You did get lucky, congrats. Having one of the vibrators is kind'a like having a bad back.... hard to appreciate it until it happens to you.

  • Like 1
  • Haha 1
Posted

That's Great for you and the several others. But for the people that have this vibration it very annoying. (1) too know other trucks don't or some haven't noticed.(2) nobody from GM Customer service has been on here to help anybody. If there is a fix it would be great. a lot of people have tried different thing and no luck. A lot of $$$$ and time spent.

 

anybody have a success story?

 

Yep, those who were or are tenacious and or smart enough to get a buy back.

 

oh... Hi Jessie!! (o:

Posted

As well as the vibration issue for 2.5 years and the paint having moisture behind it and falling off my AC just failed haha.

 

I am officially at a loss for words.

Posted

As well as the vibration issue for 2.5 years and the paint having moisture behind it and falling off my AC just failed haha.

 

I am officially at a loss for words.

Wow. You won everything with yours. Trifecta of "wtf did I buy?"
Posted

Wow. You won everything with yours. Trifecta of "wtf did I buy?"

 

Yeah its a bummer, I'm not here to bitch about it just have to spend about $2k just to get it to a point that I can sell it at a loss and be done. It sucks but its time to move on.

Posted

 

Yeah its a bummer, I'm not here to bitch about it just have to spend about $2k just to get it to a point that I can sell it at a loss and be done. It sucks but its time to move on.

I understand completely. Getting mine ready for the same thing.
Posted
On 10/9/2017 at 9:47 PM, kthomas72 said:

As well as the vibration issue for 2.5 years and the paint having moisture behind it and falling off my AC just failed haha.

 

I am officially at a loss for words.

My AC failed yesterday 48K miles.  Seems GM has been using a condenser on this gen truck they know cracks and develops a leak.

Posted (edited)
On 10/9/2017 at 6:17 PM, ron 513 said:

That's Great for you and the several others. But for the people that have this vibration it very annoying. (1) too know other trucks don't or some haven't noticed.(2) nobody from GM Customer service has been on here to help anybody. If there is a fix it would be great. a lot of people have tried different thing and no luck. A lot of $$$$ and time spent.

 

anybody have a success story?

Is this a serious post??  Have you not read through the nearly 800 pages of this thread?  I can sum it up for you.  Tires re-balanced fix alot of them, some get the rear end replaced and it helps, some the vibes go away over time others they get worse over time.  This effects a very small amount of people who own these trucks (me being one of them).  Your options are 1) try everything that has been discussed in these 800 pages 2) trade your truck in on another GM or a different brand 3) live with it.  This may sound blunt but that is how it is.  Go to another brand truck forum and look under their "issues" thread and you will find problems there as well.

Edited by tnchevy
  • Like 3
Posted
3 hours ago, tnchevy said:

Is this a serious post??  Have you not read through the nearly 800 pages of this thread?  I can sum it up for you.  Tires re-balanced fix alot of them, some get the rear end replaced and it helps, some the vibes go away over time others they get worse over time.  This effects a very small amount of people who own these trucks (me being one of them).  Your options are 1) try everything that has been discussed in these 800 pages 2) trade your truck in on another GM or a different brand 3) live with it.  This may sound blunt but that is how it is.  Go to another brand truck forum and look under their "issues" thread and you will find problems there as well.

Kinda funny to say it effects a small amount of people in the same post as referencing an 800 page thread

 

Not sure where you guys came up with this small number of people thing

  • Like 2
  • Haha 1
Posted

probably bc most of the people who dont have the issue aren't here on the forum. i bet a good amount of people having the issue joined the forum for that specific reason

Posted

Well I am happy to say mine has been fixed. The biggest problem was the ring & pinion. The ring had a tooth that was higher then the others so that was why at certain spped it would vibrate. I put a set of tires on and run snow tires in the winter and no vibration with either.

 

  • Like 2
Posted
9 hours ago, tnchevy said:

This effects a very small amount of people who own these trucks (me being one of them). 

 

Please share with us the raw data you've personally collected to substantiate this claim.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • HD at the moment, are kinda their own deal.  How LTZ sells on those vs on 1500, there is a difference.   They are merging most of the mid trims on 1500.  LT, RST and LTZ are replaced by one trim, Silverado.  LT and RST are a BIG portion of sales.    Bad naming choice aside, the new Silverado trim will offer the spread of options that those three trims offered.  So expect to see things like the tech package for example, and memory seats.  And LT Trail Boss will now just be "Trail Boss" (formerly LT Trail Boss) but will offer content spread like the new Silverado trim will.  The press photos showed the Trail Boss (formerly LT Trail Boss) has access to Super Cruise now, which on the current truck was High Country only.       Here is the Trail Boss interior.  Memory seats and Super Cruise are present.  All things the LT Trail Boss it replaces, and the RST it was based on didn't get on the current gen.  You had to go to LTZ or ZR2 for memory seats, and High Country for Super Cruise.      
    • I installed a Hellwig rear sway bar on my 21 Sierra SLT, it made a huge difference on how the truck handles, no body roll, the trucks much more planted now. Not sure of the suspension differences between the 21 and 26,  if its body roll your having a sway bar will solve it. 
    • So a follow up and my fix. I found in online searches the live data to look at on a scan tool to verify the fuel tank pressure sensor was working.  It showed an spec number towards the lower end of the rang, but in spec.  Then while it was running opened the gas cap and the pressure should change.  It didn't change even a tiny bit.  The data for the purge valve said it was open...never changed. So then I measured the voltages on the plug for the fuel pressure sensor and they matched what it should be.  So local car quest parts had the sensor in stock...it was a bit of a pain to remove and an even bigger one to get it to actually go back in.  It helped to unbolt the driveshaft and bungie cord away from the gas tank to give a bit more room to work. So fuel tank pressure sensor in I cleared the code, and started it up.  I went to the scan tool's live data and... Eureka! The pressure number was different and fluctuated a bit.  So took it on a short drive and pressure number varied saw the purge valve go from closed to open and back to closed.  Drove it to and from work for roughly a week plugged in the scan tool no codes.  I took it in to get tested and passed.  In my state's infinite wisdom (oops meant greed), since I pushed the test with the maximum extensions I have to take it back in by Feb '27 to 'get it back up to date', then my next test won't be until Feb '29. 
    • Any grease on the stud threads of any kind?   Wheel studs should have NOTHING on them for proper torquing and so the nuts don't back off.     Are all of the mating surfaces clean?  So wheel, rotor and hub?     We've had plenty of trucks at work with that wheel, this is a first to me.  Makes me think they've got a lube tech putting anti-seize on all the wheel studs or some kind of grease, and they need to stop doing that.  To have 11 other trucks with the same exact problem.      
    • I was a Chevy guy for years, then switched to GMC because I liked the looks better.  I'm actually thinking I like the Chevy looks better than GMC for the first time in a lot of years.   One thing I know for certain, the new GMC dash is hideous!  Chevy wins this one!  
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...