Jump to content

Rusting Frame

HOTTWIN

By HOTTWIN
in Troubleshooting & Recalls

 Share

Recommended Posts

2017SierraSLT Senior Enthusiast

2017SierraSLT

Posted
Posted
9 hours ago, ShamrockShooter said:

I'm not really sure I see the point in any of the applications. All the frame has little holes an cutouts so you can spray the outside all you want to look pretty, but the inside where you can see or spray will be just as rusty as the outside was. Am I off base on that?

Sent from my SM-G930V using Tapatalk
 

It is important to flush out the frame with a garden hose at least once a year to prevent accumulation of dirt and debris that can lead to rot inside the frame.

  • Replies 539
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

Jim Prufrock
Jim Prufrock

Ok, I am new to this site but as a GM tech who has been pushed too far, its time the truth came out! I know for a fact in the northeast, there is a service bulletin #PI056E: and its titled wax coating

OldHobo
OldHobo

That's not acceptable! Looks like it was done by a blind man. I'd be back there demanding to know why they had the truck for 3 days and that's all they accomplished. I sincerely doubt it's GM's fault,

pm26
pm26

Well, now you see the GM manufacturing trend for these trucks. The idea is to produce a comfortable vehicle with a car like ride, silent interior, and loaded with gadgets. This is bound to impress t

Posted Images

Akamule Enthusiast

Akamule

Posted
Posted
13 hours ago, ShamrockShooter said:

Wow, how many miles and what year is your truck?

Sent from my SM-G930V using Tapatalk
 

2014.  Had around 30k when I took that picture

  • 1 month later...
Jadis Enthusiast

Jadis

Posted
Posted
On 12/2/2017 at 12:35 PM, Akamule said:

2014.  Had around 30k when I took that picture

Damn mine looks the same as yours. Are you planning on doing anything? I've considered taking a wire wheel on a drill to the frame under the truck and then painting with POR-15 but I dunno if it's worth the hassle.

Beer Belly Enthusiast

Beer Belly

Posted
Posted

Do you launch a Boat ?....that looks pretty extensive

On 12/1/2017 at 11:03 PM, ShamrockShooter said:

Wow, how many miles and what year is your truck?

Sent from my SM-G930V using Tapatalk
 

 

sdeeter19555 Senior Enthusiast

sdeeter19555

Posted
Posted
Has anybody had the thought that maybe wax dipping is the future? You cannot stop nature from creating rust, fords trying with their beer can body's, but sorry shit decays. I had the moment when I noticed surface rust on my 56k truck, but then I realized it's surface rust, I live in the salt belt, and about the only thing I can do is what I did with my 04 and religiously wash it..in the end my 04 had mild rust, but in the 13 years of life it never looked like the titanic
The wax coat frame is a grand idea, and I bet it would work just fine...GM seems to have an adhesion issue, which is a preparation problem and not an issue with the coating itself.

Steve
2012 2500hd

Akamule Enthusiast

Akamule

Posted
Posted
On 1/12/2018 at 2:16 PM, Jadis said:

Damn mine looks the same as yours. Are you planning on doing anything? I've considered taking a wire wheel on a drill to the frame under the truck and then painting with POR-15 but I dunno if it's worth the hassle.

Had the dealer recoat it because it was still under the 3yr 36k.

 

Akamule Enthusiast

Akamule

Posted
Posted
On 1/13/2018 at 7:32 AM, Beer Belly said:

Do you launch a Boat ?....that looks pretty extensive

 

No boat, the truck was driven by a salesman at the dealer before I bought it so I’m guessing it just got driven in salt and never washed.

sdeeter19555 Senior Enthusiast

sdeeter19555

Posted
Posted
No boat, the truck was driven by a salesman at the dealer before I bought it so I’m guessing it just got driven in salt and never washed.
If it was a demonstrator, they get washed multiple times a week...

Steve
2012 2500hd

Colossus Senior Enthusiast

Colossus

Posted
Posted

yeah but how many of those car washes have undercarriage wash things as well?  So much salt and chemicals get up under the truck and can eat at things that way. 

sdeeter19555 Senior Enthusiast

sdeeter19555

Posted
Posted
yeah but how many of those car washes have undercarriage wash things as well?  So much salt and chemicals get up under the truck and can eat at things that way. 
If it was the dealer I worked at, it got hand washed nearly every day.

Steve
2012 2500hd

  • 3 weeks later...
Amart88 Enthusiast

Amart88

Posted
Posted

I have a 17 sierra, just looked the other day, slight spot of rust where the jack/hoist touches the frame.  Seems anywhere the wax coating is disturbed will rust very quickly. I had a 2015 Silverado, got a Krown oil undercoating done. never had any rust for the 2 years I owned it even with winter road salt.  I plan to get my new truck done soon.

 

Like already stated, it helps to regularly spray off the undercarriage especially if you live in an area that uses road salt. Highly recommend getting a rust proofing spray done.  (not fluid film though as from what I have heard will melt the wax off all together)

  • 3 weeks later...
churchy1313 Enthusiast

churchy1313

Posted
Posted

Just bought 4 cans of Dauberts Nox-Rustemoji768.png X-121B.

My frame has very little of the wax left on it.

Truck has always been in NC. 

Going to do it myself.

 

 

rocky66 New Member

rocky66

Posted
Posted

Just purchased a 2018 silverado 2500 hd a month ago and now noticing some surface rust on the frame in a few spots. Factory wax is not as bad as the 2013 gmc sierra 1500 I purchased new. I wanted to get the line-x undercoating but wasn't 100% sold and did not want to void the factory rust warranty, if that really matters. What would be the best course of action to stop this mild surface rust dead in its tracks?

Thomcat Senior Enthusiast

Thomcat

Posted
Posted

Forget undercoating......just spray any rust areas with Rust-Oleum RUST REFORMER comes in a spray can. Instantly converts rust to a protected surface....chemically converts the iron oxide to a rustproof compound with a flat black finish matching the existing frame coating. Sprayed the few rusted frame contact areas 2 Winters ago and still good.

  • Like 2
Sierra Jon Enthusiast

Sierra Jon

Posted
Posted
Forget undercoating......just spray any rust areas with Rust-Oleum RUST REFORMER comes in a spray can. Instantly converts rust to a protected surface....chemically converts the iron oxide to a rustproof compound with a flat black finish matching the existing frame coating. Sprayed the few rusted frame contact areas 2 Winters ago and still good.
Is this the right stuff? Box of 6. Thanks man!
https://www.amazon.com/dp/B00M0NT53S/ref=cm_sw_r_cp_apa_GL.NAbN7N31ES

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • dna9656
      New to Me 2010 SLE (Quirks, Issues)

      By dna9656 · Posted

      Your tire pressure issue may just be batteries, you can reset them using tge Ing switch (I think) and the owner's  manual. ChatGTP will b e a faster, better help than Google.
    • Another JR
      Towing In Loose Gravel

      By Another JR · Posted

      The thinking is that starting out in a higher gear makes it easier to avoid applying excessive torque when pressing the gas pedal. In a modern 4wd truck with 4 low and a limited slip or locking rear end, I would use 4 low and try to crawl up the ramp. Sometimes if they are too slippery, you have to back up to let the boat have some bouyancy, and then accelerate briskly to get some momentum to help you pull the through the slippery parts. 
    • XY74
      Roll up bed cover experiences

      By XY74 · Posted

      I have a Retrax pro that I first had on my 2020 chevy and transferred it to my current GMC.  It stays in the garage most of the time, so hard for me to judge it's long term weather resistance.  It still works perfectly, been very durable.  It doesn't see oil patch usage, but it's not a mall queen.  It keeps most things mostly dry (small leaks) and the security of it is enough to slow someone down but not keep them out for long.  I would buy one again, it works for me.     
    • fm2176
      New to Me 2010 SLE (Quirks, Issues)

      By fm2176 · Posted

      Thanks to the convenience of Amazon, I was able to get a few things done to the truck today.  I installed Carquest Premium oil and air filters with five quarts of Mobil1 High Mileage 10-30 along with a quart of Pennzoil Platinum 5w-30 I already had.  The latch for the flip up center console lid was broken so I replaced it along with the power mirror switch.  I found my push retainer assortment this morning and reattached the plastic under the bumper and it was only held on with a few screws and retainers.  Then I programmed a new remote keyless entry fob so I can lock my dog in the truck when I take her out with me (I've got to keep the air going for her since it's been in the 100s).  Finally, I ordered some LED interior bulbs and replaced the reading lamps.  The front lights are working fine while one of the back lights only works intermittently and the other not at all.   While under the truck, I found the source of at least one of the noises: the sway bar links need replacing.  I ordered a set of Suspension Dudes links with Code Red bushings.  Never heard of them, but they're made in the USA and have decent reviews.  While making yet another Amazon order, I went ahead and added a set of front tow hooks.  I went with red, since that's the color of the sway bar link and bushings and it should look decent enough on a black and chrome truck.  Speaking of which, it doesn't bug me much, but the passenger side mirror has a chrome cap while the driver side doesn't, so eventually I'll make them match one way or another.  Oh, and I ordered a $20 TPMS reset tool.  No idea if it will do anything for my sensors but it was cheap and will work for the Ford Transit Connect as well.     For tradition's sake, I ordered a new oil change wrench.  I kept the Snap-On 9/16"x15mm GM wrench I bought when I was 18 in the 2006 GMC from the time I bought that truck until the truck was lost.  While I was tempted, there's no need to spend $80 for a new SO wrench, or even $50 with shipping for a used one on Ebay.  I just bought a Duratech 15mm extra-long ratcheting wrench to do the job as needed.  It works, and if I like that wrench enough, I'll buy the set.  
    • Another JR
      Multigate electrical problem

      By Another JR · Posted

      The recall is for exactly this issue - those drain holes combined with the limited environmental capability of the tailgate electronics card inside the tailgate were a problem. The “safety issue” was the potential for the tailgate to spontaneously open, but all kinds of tailgate misbehavior can occur from water contamination of that control card.    There is no real fix yet. The initial recall just disabled the tailgate. Later, when parts became available, they would replace bad parts with new parts of the same bad design. My dealer is going nuts because the few times I let them get their hands on my truck, my tailgate is off due to a slide-in camper installation. They really want to cut my tailgate wires, but I won’t give them the chance. I will let them get their dirty hands on it when a real fix (redesign) is available.  My tailgate, which works just fine with sealant plugging the drain holes, will remain safe in a dry storage crate until then.  

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...