Jump to content

2019 Silverado Backup Camera Problems

JayTrailBoss
 Share

Recommended Posts

Milleam Enthusiast

Milleam

Posted
Posted
On 10/15/2019 at 9:46 PM, Thejet07 said:

I wonder how hard it would be to switch out to the HD camera and if it’s even possible?


Sent from my iPhone using Tapatalk

I was thinking the same thing. Just got a 2019 RST and didn't realize it wasn't the HD back up camera. Could it really be that hard to swap out the tailgate mechanism with camera? would love to here if someone has done this

  • Replies 135
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

AMPRG
AMPRG

I don't agree with you. There is no way you can park this monster without back up camera and without hitting anything in tight spaces. Also, how will you hook your trailer without helping by someone e

AMPRG
AMPRG

For those who have this issue, try this: after cranking up the engine wait 30 seconds before put it in the gears. Some issues were existed with HD cameras long ago and before latest updates. Still aft

Daverado
Daverado

Rearward visibility is required by law, it's not a "luxury".  It's a law because people have died.  There is no way you can see what's below behind your tailgate from inside the cab with just your mir

Posted Images

JayTrailBoss Enthusiast

JayTrailBoss

Posted
  • Author
Posted

FYI, taking my truck back to the dealer for camera issue glitching out still, brake life at 0% despite just being serviced, and check engine light on after engine/transmission began jerking at 60mph. Light went out but got the code ? Related to MAF sensor. The camera was looked at when I first got the truck, again when it was serviced about a month ago/7k miles but this time I said I'm not leaving with the truck until it's fixed. This is ridiculous and is a safety concern especially with 4 kids come on GM

davester Senior Enthusiast

davester

Posted
Posted

Really?

15 hours ago, JayTrailBoss said:

FYI, taking my truck back to the dealer for camera issue glitching out still, brake life at 0% despite just being serviced, and check engine light on after engine/transmission began jerking at 60mph. Light went out but got the code ? Related to MAF sensor. The camera was looked at when I first got the truck, again when it was serviced about a month ago/7k miles but this time I said I'm not leaving with the truck until it's fixed. This is ridiculous and is a safety concern especially with 4 kids come on GM

It's not a safety concern, as the brake life reading zero is a computer error, not that the brake pads are actually worn out...unless you've driven it 50+ K miles...

  • 2 weeks later...
Shawn9999 New Member

Shawn9999

Posted
Posted

I have a 2019 GMC Sierra Denali with every option. My camera has cut out completely it reads service rear vision system. It isn't just the cheaper models. This is an 82000 dollar truck. 

68type3 New Member

68type3

Posted
Posted

I have the same issue with my 2019 lt and the service guy told me it was normal for the trim i have, and the worst part is that  make you feel like you are making a big deal for a backup camera

Thomcat Senior Enthusiast

Thomcat

Posted
Posted
On 10/28/2019 at 2:13 PM, davester said:

Really?

It's not a safety concern, as the brake life reading zero is a computer error, not that the brake pads are actually worn out...unless you've driven it 50+ K miles...

I ignore the DIC readings for brake life,  got my own built-in brake life monitor called my eyeballs. Wide spokes in the alloys permit direct viewing of the edges of the pads for brake life without removing the wheels.

Thomcat Senior Enthusiast

Thomcat

Posted
Posted
On 10/27/2019 at 9:58 PM, Milleam said:

I was thinking the same thing. Just got a 2019 RST and didn't realize it wasn't the HD back up camera. Could it really be that hard to swap out the tailgate mechanism with camera? would love to here if someone has done this

Might be more than just the camera, convenience II option pack comes with HD camera and HD touchscreen. Changes in the (Silverado) reverse lighting improved over the previous gen.....my '16 (white) lenses had reflectors only pointing rearward, new taillights in 19+ have lenses with reflectors pointing rearward and to the side of the vehicle for better wide angle lighting with stock bulbs.

  • 3 weeks later...
ChrisM73 Enthusiast

ChrisM73

Posted
Posted

Has anyone had a dealer fix their "blue screen of death" on the backup camera? Had my 2019 RST in a few weeks ago, and of course could not duplicate the issue. Since it wasn't malfunctioning there, they couldn't do anything.

 

It seems to not work on start up, regardless of temperature or waiting for the full infotainment boot up. If you drive for a little, and let the truck fully shut down, it seems to work.  Of course, that means when you drive to the dealer it them works when it starts back up. 

 

If it is a federal law that vehicles need backup cameras, how is GM getting away with this?

AMPRG Enthusiast

AMPRG

Posted
Posted
On 12/6/2019 at 8:14 AM, ChrisM73 said:

Has anyone had a dealer fix their "blue screen of death" on the backup camera? Had my 2019 RST in a few weeks ago, and of course could not duplicate the issue. Since it wasn't malfunctioning there, they couldn't do anything.

 

It seems to not work on start up, regardless of temperature or waiting for the full infotainment boot up. If you drive for a little, and let the truck fully shut down, it seems to work.  Of course, that means when you drive to the dealer it them works when it starts back up. 

 

If it is a federal law that vehicles need backup cameras, how is GM getting away with this?

Take it back to the dealer for software update. 

papasink Enthusiast

papasink

Posted
Posted
On 5/4/2019 at 6:13 PM, JayTrailBoss said:

Thanks, I know that's what they said - the HD model is not having this issue it's just the "lower end" model screens!? The dealer said there is nothing they can do with it at this point though...any ideas for follow up action plan?

Mine said the same thing.  Daytime is okay and kicks out at times.  I also get the service rear camera notice and screen goes blank.  At night it gets real fuzzy with lines through it.  Took it to the dealer and they said they didn't find any issues and I even showed them the video.  They said there is nothing they can do.  Sad!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Erfar
      Oil Change

      By Erfar · Posted

      have you stuck with dealer oil changes since then? I made the same switch after getting tired of crawling around under the truck, but I’ve found some dealers are way better than others about getting you in quickly. Curious if yours has been good about scheduling or if you’ve had to look elsewhere for quicker turnaround.
    • cherryred21duramax
      Can anyone decode a VIN to determine if this truck has had emissions issues or a recall?

      By cherryred21duramax · Posted

      Thank you.   I am set on a 3.0 Duramax as my previous truck with a Ford Ecoboost had just as many, if not more, "common" issues.  Cam phasers, timing chain issues, 10-speed valve body and CDF drum, emissions issues, etc.  So I figured, why not get 2x the fuel mileage (these things got 27+mpg on every mixed city/highway test drive I put them through) and better towing capability with resale value to boot?   My minimum, shortest trip will be 50 miles 1-way and I regularly go out of state with a travel trailer.  I'm planning on using this for a marketing/event promotion business also, which would require regular towing of trailers for bands, DJs, sound and lighting gear, along with my personal camera gear for filming events.   Looked at other trucks in the $30k+ price range but the issues seem to be everywhere, plus too many with gaudy mods.  I'm literally sticking with RWD trucks because they tend to be actually used as trucks, vs. the 4x4 models I've seen with unsafe lifts, huge tires, and general mods that would affect reliability (I'm wondering if some of them were tuned, hence the aggressive throttle response and hard shifting).   So my goal is to find a stock, 3.0 with 1 or 2 owners, in good physical condition, and decently well maintained.  Can't seem to find that up here, everything in the $27-30k range has had multiple owners, smoke smell, issues, or body damage.  Or the ridiculously modified trucks with 80k miles for under $27k but lots of problems...
    • KARNUT
      OCI, not when but why?

      By KARNUT · Posted

      That’s pretty tough Grumpy. I reread the previous few posts. They all reference oil changes. Much like your last thread. In my humble opinion it keeps things interesting.
    • Grumpy Bear
      OCI, not when but why?

      By Grumpy Bear · Posted

      Engine Wear and ISO 4406   1.) Cold Starts. 2.) High Particle Count. 3.) Low operating temperature viscosity and high low temperature cranking viscosity. 4.) Depleted AW, Friction and Acid packages.  5.) High engine load.    https://me.caltexlubricants.com/en_me/home/learning/from-chevron/heavy-duty-diesel-vehicles-and-equipment/The-Importance-of-Clean-Engine-Oil-and-Its-Impact-on-Equipment-and-Business-Performance.html   High particle counts have five sources. 1.) They are manufactured within the engine. Both wear debris and amalgamation of degradation products and combustion driven soot (worse in GDI). 2.) They are ingested via intake air. Ever hear the best oil filter is a good air filter? 3.) They are entrained in the fuel. 4.) This one is insidious. They are introduced in 'fresh oil'. 5.) They are introduced during the oil change.   ISO 4406 is the test that measures and quantifies the combine effects of all of the above particle related issues. You can mitigate your way into multiples of engine life by being attentive to them all.    https://www.hyprofiltration.com/blog/is-new-oil-clean   (from the link above)    [Quote] What Is the Recommended ISO 4406 Cleanliness Code for New Oil?   A good upper limit for new oil cleanliness is 16/14/11 (ISO 4406). Typical new oil usually has ISO codes of 19/17/15 or worse, which is far too dirty for sensitive components. This can be a major cause of degradation and premature failure. [Close quote].     Source of graph: Machinery Lubrication (GM Study)  
    • Diamond817
      WTS: Pulsar LT 22451 GM Silverado/Sierra 5.3 & 6.2

      By Diamond817 · Posted

      Make me an offer!

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...