Jump to content

Seat Movement Issues

jdvaughn

By jdvaughn
in Troubleshooting & Recalls

 Share

Recommended Posts

scott19677 Senior Enthusiast

scott19677

Posted
Posted

Last time I talked to ERT they were completely backing the dealer. The dealer told me that it was normal based on others that they tested including a high country. On a trip for work now, I plan to go back and look at these others that make it normal.

Otherwise I am thinking of making an older generation seat slide in there, back when they actually cared. Anyone know how much different it is? Maybe I could just weld the existing one in place, at least it wouldn't rock anymore. If I wanted a rocking chair I would get a porch, not a new truck.

A loose seat is a "Safety Issue." Raise enough hell in the right place and you will get things moving. Back around last March or April I emailed Mary Barra at GM and less than eight hours later I got a phone call from someone in her office wanting to remedy the issue. Fixed ever since then and also got a Gift certificate for $500. I went to a different dealer to spend the $ on some OEM steps and ran into an old high school friend that worked in the parts dept. Talk about luck. I got the 4inch oval steps for about what a case of beer cost.

  • Like 1
  • Replies 1.1k
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

hotrodz37
hotrodz37

So I was able to solve the seat movement issue as a few others with hose clamps. I bought 2 - 1" hose clamps, and 2 - 3/4" rubber clamps and slid the rubber off of those and onto the hose clamps. I bu

GMC-AT
GMC-AT

whatever... I'm sure 2013 Chevy was perfect and had no issue. I'm sure your 1996 Ford is also perfect and never had any issues ... The truth is that every car/truck, every year has it's issues. Th

tanner709
tanner709

Thanks for this.   Just re-quoting for all the new members because I spent about 20 minutes trying to find the fix, with pics.

Posted Images

GsBowtie Enthusiast

GsBowtie

Posted
Posted

Just goes to show you how much markup dealers normally charge!

KSTMSTR Enthusiast

KSTMSTR

Posted
Posted

I took my 2014 High Country in to the dealership last Friday, for a rear end clunk noise, and a shifting driver seat. they game me a service bulletin about the rear end noise, saying that it was perfectly normal, and told me the tech could not duplicate any seat movement. Both, of course were complete BS answers.

 

I find it absolutely amazing, that these issues are so prevelent in such a supposed "high-end" GM truck. I'm feeling like I just spent $50+k on the WRONG truck brand!

Hamm20132 Enthusiast

Hamm20132

Posted
Posted

I took My truck in and service Dept had a kit and it was installed in fifteen minutes. My seat problem was fixed and not reoccurred.

KSTMSTR Enthusiast

KSTMSTR

Posted
Posted

I took My truck in and service Dept had a kit and it was installed in fifteen minutes. My seat problem was fixed and not reoccurred.

If you wouldn't mind, could you please take a picture of the work order they issued you for this repair,and post it. I'd LOVE to take a copy of it into my Chevy Dealer's service department and have my seat fixed!!!! Thanks - Rick

Hamm20132 Enthusiast

Hamm20132

Posted
Posted (edited)

The work order list, Refer Pi1183a, movement between seat pan front pivot points&a pivot bar, lubricate front seat pivot points , install seat actuator shim clip and seat cover retainers,, it fixed My truck

Edited by Hamm20132
andyhaug Enthusiast

andyhaug

Posted
Posted

Found the problem causing the seat to rock front to back. Service tech is really tall and had the seat all the way down and back last time I picked up my truck. If the seat is all the way down the 4 link seat suspension links line up with the actuator so the actuator cannot hold the seat properly. Raised the seat up part way and no more rocking. Wonder what they were thinking when they designed this.

KSTMSTR Enthusiast

KSTMSTR

Posted
Posted

So, just having the service tech lower your seat all the way to its lowest position, and you then raising it back up to your desired position has fixed your seat movement issue??? Thanks for posting.

andyhaug Enthusiast

andyhaug

Posted
Posted

It fixed the front to back rocking. They had to install the clip to get the seat bottom to stop moving independently from the back.

lemmuhj Enthusiast

lemmuhj

Posted
Posted

Just got my truck back.This was my second time. Seat seems ROCK SOLID.

 

Invoice says "replaced left front seat bottom frame"

 

Will try to upload a pic of the invoice.

 

I will say that i crucified my service salesrep/and dealer in an online survey. He knew this and kept telling me he needs to make this right blah blah and that he cant afford for me to give negative feedback. Told him it wasnt personal, but having a seat move like this is totally unacceptable.

KSTMSTR Enthusiast

KSTMSTR

Posted
Posted

Thanks for taking the time to report back, and for posting the copy of your invoice. Hopefully this will help me, and anyone else who comes, to get the Very Irritating seat movement issue fixed!!!! Cheers - Rick

pm26 Senior Enthusiast

pm26

Posted
Posted

I took my 2014 High Country in to the dealership last Friday, for a rear end clunk noise, and a shifting driver seat. they game me a service bulletin about the rear end noise, saying that it was perfectly normal, and told me the tech could not duplicate any seat movement. Both, of course were complete BS answers.

 

I find it absolutely amazing, that these issues are so prevelent in such a supposed "high-end" GM truck. I'm feeling like I just spent $50+k on the WRONG truck brand!

I was under impression that High Country edition trucks used completely different and sturdier seat frames. Apparently not.

Sierra Jon Enthusiast

Sierra Jon

Posted
Posted

OK so I've searched back at least 10 pages on this forum and I find pi1376 which I cannot locate online. Is this the correct bulletin?

 

I'm bringing my truck in for drivetrain hum and I would like to hit them with as many bulletins that are applicable to me as possible. This is one of them.

 

Sent from my Nexus 6 using Tapatalk

KSTMSTR Enthusiast

KSTMSTR

Posted
Posted

The two TSB's I've found relating to seat movement are: #11310A, or #PI1183A. Rick

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Chuck FB
      OCI, not when but why?

      By Chuck FB · Posted

      I certainly could be wrong but I hear of pickups far newer than that 2007 cutoff which may not be going to the wrecker but are having engine work done and be that a reman engine or new engine or trying to repair the existing engine. Some of it would be design issues as per the cylinder deactivation system that GM has and one of those lifters wiping out the cam and the question of oil changes moving the needle or not on that whole mess, or in the case of Ford pickup engines that have the long timing chains and wearing them out and the roller followers and phasers and some of that certainly goes back to oil change intervals. But in those various cases the truck has all sorts of life left in it and so the unfortunate owner and may be original owner or used market owner that is pouring money into repairs so the truck is not seeing the salvage yard yet but damage is happening by infrequent oil changes. A friends son had bought a 2018 I think it is half ton GM and it had some sort of extended or used dealer warranty on it and of course the lifter issue bites and its rattling and so the dealer had to swallow the bill and was at least 7000.00 and I think they only replaced what they felt they had to replace so yeah, I can see that being a ticking time bomb in the not too distant future. Would frequent oil changes cure all these engineering "marvels", probably not but some engine designs have shown that they do much better if the oil is changed a lot more often then if the manufacturer service claims are followed. New trucks cost so much that there is an incentive to keep the existing truck on the road by repairing. 
    • davester
      Tranmission stays in Low

      By davester · Posted

      get a good code reader, and find out what problems the truck has noticed by reading codes. cheap ones can only get basic engine codes, you may want to get one that can get codes from all the computers in your truck.
    • asilverblazer
      OCI, not when but why?

      By asilverblazer · Posted

      This is sort of my point, salvage yards aren't overflowing with all these 'poorly' maintained trucks - excellent/good/servicable condition otherwise, salvaged only as a result of a bad engine from poor oil change regiment.    In my area, there are no 2007 to newer gm trucks/suvs in any salvage yards. A few are in the 'recyclers' with very obvious reasons for being there - wrecked.
    • asilverblazer
      Stabilitrak conversion to Z71

      By asilverblazer · Posted

      Stabilitrack was a stability control, traction control system, that functioned independently from the transfer case.   Z-71 has nothing to do with the transfer case or differential.   If it does have an AWD system, my memory recalls this being specific to the Denali trim, converting won't be as simple as swapping out mechanical parts like differentials and transfer cases. It will require reprogramming at a minimum. Long story short, not likely worth it.   Pulling a fuse, may disable the AWD system, it might also prevent any other transfer case functions.   However, the AWD case was generally based on the same transfer case you refer to in the 2006 Suburban. If it still has a 4-High and 4-Low where the transfer case locks and splits power 50-50 front to rear, what are you gaining by changing anything? A true-rear wheel drive only, what good will that serve? Not enough to go through the trouble of changing out all the parts.    Generally, all the factory systems will handle a 33" tire and re-gearing. Probably a 35" tire too, if you aren't driving like a caveman. If 35" tires are in the plan...   If you do plan on driving like a caveman or are fully committed to 35" tires, an entire re-think of the build is probably in order. Starting with square one, an IFS front end isn't going to be the best starting point for 35's and caveman driving. 
    • PunchT37
      Oil Consumption

      By PunchT37 · Posted

      1/2 qt over full ain`t gonna hurt $h!t. Most times, a whole qt won`t either. Most have windage trays now. As long as the crank isn`t slapping itself in the oil, it`s not the end of the world.   We used to overfill 1 qt at the track, at race time. Better to have it over full than having the pan sucked dry at 6500 rpm`s.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...