Jump to content

2014+ K2XX - Center Console Swap / Retrofit - Plug and Play Harness!

pgamboa

By pgamboa
in Modifications & Accessories

 Share

Recommended Posts

pgamboa Senior Enthusiast

pgamboa

Posted
  • Author
Posted
Hey guys has anyone successfully done a center console swap on the Eassist ? 

Yes. You just need to ensure you get an E-Assist version of the console With all the vents and such.


Sent from my iPhone using Tapatalk
  • Replies 1.2k
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

pgamboa
pgamboa

Jump Seat to Full Center Console Retrofit  Plug and Play Harness by PGAMBOA     For those of you looking to swap your Jump Seat to a Full Center Console, I now have a Plug and Play Harness

pgamboa
pgamboa
ChrisTaylor14
ChrisTaylor14

I waited a long time to do this upgrade on my truck because I didn’t want to have to cut and splice the wiring in my truck and wanted everything to work as if the console were factory. So when I saw t

Posted Images

Bradley Michael Walsh New Member

Bradley Michael Walsh

Posted
Posted
12 hours ago, pgamboa said:


Yes. You just need to ensure you get an E-Assist version of the console With all the vents and such.


Sent from my iPhone using Tapatalk

 

 

Okay. I already have a non Eassist Center console. Going to try and retrofit it and cut vents to make it work 

  • Like 1
pgamboa Senior Enthusiast

pgamboa

Posted
  • Author
Posted
Is there a website to order this from?

Not yet. All ordering done via PM or Email. Email me at [email protected]


Sent from my iPhone using Tapatalk
jonho New Member

jonho

Posted
Posted
On 1/14/2018 at 8:06 PM, pgamboa said:

You looking for pics of the finished Plug and Play Harness?  If so, I updated the post and they are in the first post.  

how do i get harness ordered

Packers774 Enthusiast

Packers774

Posted
Posted

So is the bracket not necessary for installation? My console came with a bracket (from Ebay) and I have no problem screwing it in, but wont if it doesn't add much.

WNYK2 Enthusiast

WNYK2

Posted
Posted
4 hours ago, Packers774 said:

So is the bracket not necessary for installation? My console came with a bracket (from Ebay) and I have no problem screwing it in, but wont if it doesn't add much.

That's all that secures the front of the console.Without it I think you could have some rattles or sqeaks eventually

got2bgm New Member

got2bgm

Posted
Posted

Hey guys. Thought id put this up and give a huge thanks to pgamboa. Got the console and leather seats installed. 2018 gmc sierra rclb 2wd. Used pgamboa harnesses. Amazing work couldnt be happier. Would recomend to anybody ? very helpful. Thanks a bunch!

20190606_181645.jpg

  • Like 2
bkesting Enthusiast

bkesting

Posted
Posted

A little off-topic,........i snapped off the cover of one of the cigarette lighter/charge ports in my center console. How hard is it, or what is the procedure, to replace that little cover?

pgamboa Senior Enthusiast

pgamboa

Posted
  • Author
Posted
A little off-topic,........i snapped off the cover of one of the cigarette lighter/charge ports in my center console. How hard is it, or what is the procedure, to replace that little cover?

I just did this for a customer today.

 

It’s easier if you have access to the back side. There are 2 locking tabs you need to lift up. This allows the metal insert part to push out. Once out, you can then push the plastic part of the housing and door out. But metal part needs to come out first.

 

Apparently, there is a special tool to remove it from the front.

 

Dorman 57450 Lighter Socket Removal Tool https://www.amazon.com/dp/B01ID3H3SC/ref=cm_sw_r_cp_api_i_nK2vDbKGVAVPR

 

Sent from my iPhone using Tapatalk

bkesting Enthusiast

bkesting

Posted
Posted
11 hours ago, pgamboa said:

I just did this for a customer today.

 

It’s easier if you have access to the back side. There are 2 locking tabs you need to lift up. This allows the metal insert part to push out. Once out, you can then push the plastic part of the housing and door out. But metal part needs to come out first.

 

Apparently, there is a special tool to remove it from the front.

 

Dorman 57450 Lighter Socket Removal Tool https://www.amazon.com/dp/B01ID3H3SC/ref=cm_sw_r_cp_api_i_nK2vDbKGVAVPR

 

Sent from my iPhone using Tapatalk

So this tool just pulls it all out from the front without taking anything else apart?

Edward Magri New Member

Edward Magri

Posted
Posted
On 12/13/2017 at 10:35 PM, pgamboa said:

Jump Seat to Full Center Console Retrofit 
Plug and Play Harness by PGAMBOA

 
 
For those of you looking to swap your Jump Seat to a Full Center Console, I now have a Plug and Play Harness for this upgrade!  This long awaited - PnP Harness will allow you to EASILY perform this upgrade.  NO cutting or splicing needed!
 
Center Console - Plug and Play Harness is $150 Shipped anywhere in the US. For Canada, please add $24.95.
 
Since there are several versions and configurations of center consoles and truck trim levels, I feel that I have covered a majority of the configurations that are out there.  There will be several assumptions on the ability to perform this upgrade and I’ll try to be as detailed and comprehensive as possible.
 
Please see the different USB Cable configuration diagrams at the end.
 
Assumptions:
 
- 2014-2015 Center Consoles will have different USB Cable requirements than 2016-2017 AND will have different USB Hubs.  The PnP Harness should be compatible, but you MUST verify the connector under the passenger AND the front of the console!  Since this is a custom product, there will be NO REFUNDS on it.
 
- Center Console MUST have its factory harness intact and not modified.
 
- Connection under the Passenger Seat AND Front of Center Console must look exactly like the diagram.  There is a variant X314 Connector under the seat, so yours MUST match in order for this harness to adapt. 
 
- Additional GM USB Cables must be purchased separately (based on your console year) to get USB Hubs functional.
 
- Wireless Charging - Wireless Charging became available on 2016 and 2017 consoles.  If you are looking at adding a Wireless Charging Lid to a 2014-2015 Console, please PM me for requirements.  Also, there are known issues with 2016/2017 Consoles with the Wireless Lid and charging iPhone 8 and iPhone X Phones.  There are workarounds for this that require some form of modification to the charging module.  You can also swap the module for a 2018 Module that DOES charge iPhone 8 and iPhone X phones.  Please PM me for questions on specifics.
 
- Your truck MUST have an existing 110V AC Outlet AND (1) - 12V DC Cigarette Lighter Plug as you will be reusing those.  My PnP Harness DOES NOT add the 110V AC Outlet if you don’t already have it.  However, I CAN add an additional 12V DC Outlet connection if needed.
 
- USB Cable connections will come from your HMI (Behind the Glove Box).  You MUST verify that you have the USB Ports available, otherwise, your USB Hubs will not work correctly.
 
- This PnP harness DOES NOT add any Car Play, Apple Play, or Android Play functionality.  If your truck did not already come with it, you will not gain it.
With this PnP Harness, you ***should*** have ALL the components in your console functional.
 
Those options include:
 
Front of the Console:

  • Front - Left USB Hub (Dual USB - 2016/2017or Triple USB Hub 2014/2015 - Uses my Plug and Harness AND a USB Cable from the HMI
  • Front - Left 12V DC Cigarette Lighter Outlet - Uses existing connections (truck must be equipped.  If not, I can custom add this if needed)
  • Front - Right 12V DC Cigarette Lighter Outlet -  Uses my Plug and Play Harness
  • Front - Right 110V AC Outlet - Uses existing connections (truck must be equipped)

 
Inside Storage Compartment:

  • Inside - Left 12V DC Cigarette Lighter Outlet - Uses my Plug and Play Harness plugged into the front main 42-Way Connector
  • Inside - Right USB Hub - Uses my Plug and Play Harness plugged in the front main 42-Way Connector and USB Cable
  • Inside - LED Lamp - Uses my Plug and Play Harness plugged into the front main 42-Way Connector
  • Wireless Charging Lid (2016-2017 only) - Uses my Plug and Play Harness plugged into the front main 42-Way Connector

 
Rear of the Console:

  • 12V DC - Cigarette Lighter Outlet - Uses my Plug and Play Harness plugged into the front main 42-Way Connector

 
THERE IS A LOT TO CONSUME HERE, SO PLEASE PM IF YOU HAVE QUESTIONS ON THIS.  I WANT ENSURE THAT YOU UNDERSTAND ALL THE REQUIREMENT FOR THIS RETROFIT BEFORE PURCHASING.
 
 36c4ae3d906ca20d091752c035025969.jpg

2d1fe48b1a860d65b288301255a90a92.jpg

bdcb6022704f30a3172eba5cddc1aa35.jpg

b90505fb30863f0ce59a90b99f60b2c8.jpg

dc54b9338950721e4bc7fb302ea42f56.jpg
 
 
 

16-Pin - Plug and Play Harness
a2c3f8361f06044798de54f56fbfeaab.jpg

23-Pin - Plug and Play Harness
dc6d0faaf90695b11a78695f27a370c4.jpg

 

cameronNrachel New Member

cameronNrachel

Posted
Posted
On 8/9/2019 at 1:44 PM, pgamboa said:


Not yet. All ordering done via PM or Email. Email me at [email protected]


Sent from my iPhone using Tapatalk

I sent you an email on friday to see if you can help me out for a plug an play harness. Im trying to convert from a console to a jump seat until my kids are gone without splicing into wires. Details are in the email to [email protected]

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Atlas
      Gas Prices

      By Atlas · Posted

      87 down as low as $5.14 here... winning!
    • Atlas
      Wow I'm in a pickle. (Broke down truck) and a story.

      By Atlas · Posted

      Progress... sort of.   Intake is disassembled, spider is out, fuel lines removed. Used a torch on the stripped screw with the lower intake off, much easier when I've got the intake sitting on my workbench, I made it talk. Walked right out with a pair of vice grips once it was nice and toasty hot.   New parts are piling up on my service cart waiting to be installed. Distributor, temperature sensor, new gaskets, fuel line kit, themostat, water neck.   My new pickle is I don't want to spend $600 on a replacement spider. I'm not sure IT is bad. I'm probably splitting hairs. Or it's $300 to send mine away and another 3 weeks of the truck just sitting. I have half a mind to assemble everything with the old spider to see if I can get away with just replacing the fuel pressure regulator to be safe. The obvious issue was the gushing high pressure fuel line which will be replaced. Getting to the spider really isn't that hard, and now I know what I'm doing , swapping it would be a breeze should it absolutely need one. Stupid, or smart?   The part that gives me pause is replacing the distributor. Well, it's already out. And I didn't mark it, whoopsie! Engine was at TDC when I removed it, I know that, so upon correct reinstall the metal tip on the rotor should point to the TDC mark on the distributor because that's where it was pointing on the old distributor. Worst case I'm a tooth off and have to re-stab it.   But then, what? I assume the truck will start. It doesn't appear the timing can be set. Here's the problem: These distributors can't be rotated but a degree or two, by design. What I read is Cam ****** needs to be -2 to +2 degrees, ideally at 0 (and checked/set above 1000 rpm). There should be enough wiggle to get that properly set, but checking the reported value is another potential issue. My Actron 9185 scanner says it supports enhanced GM PIDs and Cam ****** is one of them but it's unclear that I'll be able to correctly see it over OBD 1.5. I can see why people end up junking these things with life left in them. They're an absolute nightmare with tweener-year diagnostics/electronics and unobtanium parts.   Fingers crossed it starts and idles nicely. There can be hope, right? I'ma buy a lottery ticket the same day just in case.   Next steps..DO IT. I have not installed an intake before so I've been reading and watching a lot. Some say NO RTV except on china walls, some say DO RTV on water ports but not fuel/air intake. 1/4 or 3/8 bead on China walls? I think my strategy will be, obviously, RTV china walls with overlap on the gasket corners. Chapstick-style RTV the water ports. Leave intake ports dry. The only set of intake gaskets I could find locally are Edelbrock performance gaskets (uh...for an asthmatic 190hp V6? LOL) so we'll see how they do.   #NoToolLeftBehind. It took an hour, but my recovery mission for my deep 10mm socket was successful. It had rolled down the bellhousing and wedged itself between what I think are the fuel lines? I couldn't see it at all, but with a junk antenna I had laying around, I blindly went poking/sweeping for it, heard it clink, raised the truck, and caught a sliver glimpse of chrome with a flashlight way up there in Narnia. I had pushed it farther along the lines holding it captive, but within access of severely improvised tools, poking and cursing at it to finally knock it free to where I could get a fingertip on it to bring it home.    Not much to see.      
    • RyanbabZ71
      Gas Prices

      By RyanbabZ71 · Posted

      Thats crazy considering im right next door (Indiana)
    • Black02Silverado
      New Retail & Commercial Promo

      By Black02Silverado · Posted

      For a limited time, retail and commercial accounts receive an AMSOIL Vinyl Tool Tray with their order of $500 or more when they use code TRAY726 at checkout. The promotion runs through July 21, 2026.   Order at https://syntheticadvantage.com   Want to use AMSOIL in your business or sell at your store, apply here.  https://www.amsoil.com/business-opportunities/?zo=521390  
    • KARNUT
      2027 GMC Sierra: Official Discussion

      By KARNUT · Posted

      It wouldn’t have happened if the government hadn’t mandated outrageous fuel mileage standards. It does very little for the consumer. It adds cost. Back during Covid there was a chip shortage. They gave a rebate for your truck if it didn’t have the chip to turn on cylinder deactivation. It was 50$ because at best you may see 1/2 a mile increase per gallon. Splitting hairs each fuel mileage trick wasn’t mandated. The government doesn’t do the engineering work and say use this until it’s already in use and they like it. The fuel mileage was mandated. And those add ons the results. There’s a mandate and they are the results.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...