Jump to content

Recommended Posts

Posted

Our LTZ is still in Fort Wayne. It was built on the 6th and is currently bayed at event code 4B00. So it's parked at the plant but I'm not sure if it needs something done to it before it can ship OR if it's just waiting for the next full truck coming this way. 

Posted
48 minutes ago, Zane said:

Our LTZ is still in Fort Wayne. It was built on the 6th and is currently bayed at event code 4B00. So it's parked at the plant but I'm not sure if it needs something done to it before it can ship OR if it's just waiting for the next full truck coming this way. 

Wasn't it pulled for a quality control reason?

Maybe that issue has not been resolved.

A member here that has a new Trail Boss had to have the hood repainted.

Posted
25 minutes ago, Sierra Dan said:

Wasn't it pulled for a quality control reason?

Maybe that issue has not been resolved.

A member here that has a new Trail Boss had to have the hood repainted.

That's what it looked like but after the invoice was created it should have shipped if that was the case. So now I'm pretty confused. 

Posted (edited)

I am assuming the shipment to NH is probably by rail since its about 1,000 miles +- as trucks are more regional.  It typically takes a month after the invoice to get to a ramp in the dealers region, so 2 weeks is not long.   Logistics take time, the train heading NE is not going to move till its a full load. 

 

Unless you are talking (on the phone) with the dealer business center (only for dealers) than any other info you get could be outdated by as much as 24-48 hrs.  Any other access is not real time.

 

·        4B00, Bayed by the shipper (listed anytime a vehicle is sitting parked waiting for next mode of transportation.)

4D00, Bayed for Quality Control Inspection (Unknown Time frame)nkn

 

·        4200, Shipped (Moved or in process of moving to another location by transport company, see 4300)

·        4300, Intermediate Delivery (In combination with a 4200 this is saying that the vehicle has been transported to a vendor or upfitter)

 

A    Also note,  shipped DOES NOT mean its moving, it means its in the hands of the shipper and there are 1,000's of trucks to load one at a time.

own

Edited by elcamino
Posted
1 hour ago, strickland604 said:

Don't feel bad my was built 7/18 and has been at 4300 for the past three weeks.

 

I guess GM needs time to flash-rust all the uncoated iron ... :D

Posted

Does anyone have a time frame when we can start ordering 2019 crew cab with standard box? 

Posted

Just got the VIN on my Truck and Dealer said to expect Delivery in the next 2 weeks!

 

High Country in Havana Brown Metallic, 2WD and 5.3L.

Posted

I tried putting in an order for a 2018 double cab Silverado since my local dealer had a lease special on them, and this is what i was told to do by the salesman. I recently found out from this salesman that they aren't accepting orders on the 2018 model anymore, so I am being forced into getting the new 2019, which isn't too much of a problem as long as it doesn't raise the cost much (plus I think the new trail boss looks pretty sweet). It seems kind of ridiculous to me that they are doing this without having the build options open on the Chevy website for people, but I've never ordered a brand new vehicle so I don't really know what the norm is for this type of thing. The Salesman said he would put in an order for me for a truck that'll be as close to the 2018 build options that I chose. I'm just curious how the dealers are making these orders? Do they have a private site that they do orders on? Or is there a site I can go to for building out a new 2019?

Posted
7 minutes ago, Der said:

I tried putting in an order for a 2018 double cab Silverado since my local dealer had a lease special on them, and this is what i was told to do by the salesman. I recently found out from this salesman that they aren't accepting orders on the 2018 model anymore, so I am being forced into getting the new 2019, which isn't too much of a problem as long as it doesn't raise the cost much (plus I think the new trail boss looks pretty sweet). It seems kind of ridiculous to me that they are doing this without having the build options open on the Chevy website for people, but I've never ordered a brand new vehicle so I don't really know what the norm is for this type of thing. The Salesman said he would put in an order for me for a truck that'll be as close to the 2018 build options that I chose. I'm just curious how the dealers are making these orders? Do they have a private site that they do orders on? Or is there a site I can go to for building out a new 2019?

Dealers where able to place orders on the 2019, through GM, in May .  You can configure you truck for pricing here: https://www.nadaguides.com/Cars/2019/Chevrolet/Silverado-1500?category=Truck

Posted

I just got news that our 2019 AT4 has been produced and we have a VIN #! and code 3800. I hope it doesn't sit on the lot, but we will see! Cant wait for it to arrive! 

Posted
5 minutes ago, ZSTIV said:

I just got news that our 2019 AT4 has been produced and we have a VIN #! and code 3800. I hope it doesn't sit on the lot, but we will see! Cant wait for it to arrive! 

Nice! Keep us posted.

Looking forward to seeing AT4s on lots:cheers:

Posted

I just ordered a 2019 Silverado (current production spec, nothing special) this week... how long should it take to get VIN?

Posted
9 hours ago, GMC-AT said:

I just ordered a 2019 Silverado (current production spec, nothing special) this week... how long should it take to get VIN?

It took ~9 weeks from my order to get the VIN. However,  I am still waiting for Delivery!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • I know; crap pictures.   Anyway, as a finale of sorts to this thread, I had replaced both differential covers and since they had the capability of adding temperature probes, I did that. These are MaxTow analog/digital gauges with stepper motors. They'll flutter around like crazy for a moment and start at a nominal 100 degrees Fahrenheit.   I drove a 30-mile loop to the grocery store, averaging 70 MPH (as much as 80 to see if there was a quick spike in temperature. The air temperature is 102 (ambient ?). but the first pic is 7 miles into the trip. The second is getting back into the truck after leaving the store; differential temperatures dropped about three to four degrees in 15 minutes. The third pic in on the road to my house, about a mile away.   In that run, I saw a high of 150F on the rear differential, and 121F on the front. I'm sure a longer drive or towing will see higher than that, and when that happens, I can update the observations. 
    • You don't want to become predictable now, do you? 😏
    • Fully warm, coolant temp >194, closed loop.   Run time can be anywhere from just reached operating temperature to having driven 30+ miles.   The O2 chart (which is a feature I just discovered after reading) for the bad idle seems to be "most" of the time. For the little time I've been watching it (scanning and driving! watchout!) I can't seem to isolate any cause or condition yet.   It definitely idles rougher sometimes than others and so far what I've seen is the rougher idles are always rich. But not enough to set a CEL.   In other news I replaced the starter solenoid. Everything on this truck is such a PITA. Starter "snout" is mangled up with the torque converter inspection cover which is tangled up with hard cooling lines and the driveshaft. But I got 'er done without too much swearing...I just go into everything now knowing it's going to be a frustrating mess.   The starter solenoid replacement kicks off the next round of work: AC, injector rebuild, cat, exhaust. I'm just going to do it all. But first:   I don't know what my fuel pressures are. I can't definitively say the issue is the injector without first verifying fuel pressures and any leakdown. I "rented" a test kit ($199.99 at O'Really's ...intentional misspelling). They don't "rent" tools anymore, they charge you for the tool and then you return it when you're done. No joke. It is listed as a rental on the receipt but the guy told me there's no difference between renting and buying  now, you just return it when you're done and they refund the credit card. Mmmkay, whatever.   I will rule out fuel pressure issues (too much), and any leaking (that's how I'll know the problem is inside the intake). I think someone said the return line could be plugged or not flowing and that could cause high fuel pressure (and too much fuel being pushed through injectors). I'll cross that bridge if I get high readings.   As of now I'm ready to tear off the intake cover, extract the injector, and have it sent off to be rebuilt just so I can rule that out.
    • What are the conditions of this rich idle? Warm or cold engine? Run time? Does every idle look like this or only sometimes?
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...