Jump to content

Recommended Posts

Posted

Interesting, Wranglers are listed as the original equipment on Silverado's but one of the things done to mine was replacing Wranglers with Eagles.

These four we drove were all GMC sierras.

Posted

Try test driving one with 22" bridgestones.

 

Our problem Rally 2 has the 22s with bridgstones. They've replaced the tires twice and had to order four to get two round ones.

Posted

Try test driving one with 22" bridgestones.

 

 

My buddy has one with 22's and bridgestones. I'll try getting with him and take it for a test drive and see if it vibrates

 

Sent from my SM-N900V using Tapatalk

 

 

Our problem Rally 2 has the 22s with bridgstones. They've replaced the tires twice and had to order four to get two round ones.

I have the 22" Bridgestones, may or may not have roadforce, the dealer wont do the test. I'm going to put my other set of 18" Wrangler's on to test either tomorrow or thursday. as I've said, I think most of my vibration is related to the engine/ engine mount

Posted

Let me know when you get those on Jesse, i'd really like to see how that does. And I'll get you that bed cover too.Tomorrow is better than Thursday for me, Patriots vs Packers is on Thursday !!

 

HEY !!!!

 

Maybe that's the problem, everyone go out and deflate your tires a little when nobody is looking lol

  • Like 1
Posted

The Goodyear Eagle LS2 reviews from tirerack.

 

I'd say they are being a little too kind

 

post-56938-0-00411600-1439340372_thumb.jpg

 

 

post-56938-0-00411600-1439340372_thumb.jpg

post-56938-0-00411600-1439340372_thumb.jpg

post-56938-0-00411600-1439340372_thumb.jpg

Posted

The Goodyear ls2s suck all the way around. I have them and hate them. Can't wait for them to burn off.

Posted

I'll probably go with the Michelins, I've had a set of them and they live up to their rating

 

post-56938-0-17250400-1439343106_thumb.jpg

 

 

 

 

post-56938-0-17250400-1439343106_thumb.jpg

post-56938-0-17250400-1439343106_thumb.jpg

post-56938-0-17250400-1439343106_thumb.jpg

Posted

I'll probably go with the Michelins, I've had a set of them and they live up to their rating

 

attachicon.gifUntitled.jpg

 

 

 

 

That's all my dad buys are Michelins, mainly the LTX M/S 2 tires. Gets around 80k a set and are quiet and have a nice plush ride.

 

Sent from my SM-N900V using Tapatalk

Posted

Hey guys always loved the GMC styling and interior design, and have considered buying one. I'm

kinda shying away due to this steering shake / vibration issue. When there's 361 pages of post about

this issue it really concerns me.

 

I've had 2 Toyota Tacoma's a 2012 and 2014 with this type of issue the 2014 was bought back though

lemon law dispute. My current 2015 Jeep GC has a little bit of this so I'm kinda sick of shelling out for

new vehicles and dealing with this type of issues. My goal is to go back to owning a truck since I need

to be able to haul, the only truck that doesn't seem to be dealing with vibrations and steering shake is

2015 Ford F150, but the echo boost seems to require head replacement every 20,000 due to carbon

build up.

 

Any input would be greatly appreciated

 

Thanks , Jon

Posted

I say just ensure you test drive very well before buying. They do not all have this problem. Mine runs, drives and handles very well. So that means there is hope for potential buyers such as yourself. This thread is very troubling and I feel for the buyers that have this issue. I know it would drive me mad if I spent so much money for something that gives me trouble.

Posted

Well the sulastic shackles showed up yesterday, bought them direct from sulastic through ebay and saved 20 dollars. $398.00 delivered versus 420 through their website. Ordered them on the 7th arrived the 10th, not bad Texas to California. Quality is decent, the cross pins are plug welded and ground down by hand and then painted, not the prettiest by a long shot, but should be fine strength wise. Should have time this weekend to install them and then I have a 90 mile trip next Tuesday on a strip of pretty bad road that I've traveled just recently to give them a good test and comparison. I'll report back on the install and ride quality after for all who are interested.

  • Like 3
Posted

I say just ensure you test drive very well before buying. They do not all have this problem. Mine runs, drives and handles very well. So that means there is hope for potential buyers such as yourself. This thread is very troubling and I feel for the buyers that have this issue. I know it would drive me mad if I spent so much money for something that gives me trouble.

Nice truck, I thought about going with a 6" lift but can't get myself to start cutting things off the frame of a truck with a 100000 mile warranty. I thought about going back to my factory 20's with wheels spacers but had a bad experience with them on my last truck. I looked at the trailsport like you have on yours. The picture of them online looks like they're hubcentric about the hub pilot but I don't see a machined lip on them to pilot the rim onto the adapter is this case, or do the center on the hub and center the wheel as well? Thanks in advanced for the info.

Posted (edited)

 

the only truck that doesn't seem to be dealing with vibrations and steering shake is

2015 Ford F150, but the echo boost seems to require head replacement every 20,000 due to carbon

build up.

 

Any input would be greatly appreciated

 

Thanks , Jon

 

 

 

 

Google is your friend ;)

 

Took me one try to find this on a Ford forum, and there are more just like it

 

 

Hello, trying to get an issue resolved. I purchased a brand new F150 lariat supercrew 4x4 with 3.5 ecoboost. Had a 2hr drive home from dealer and noticed a vibration seemed to be coming mostly from the rear of the truck. Took it next few days to local ford dealer and they said two tires in rear had flat spots and they needed to order. I picked the truck up to drive until tires arrived two days later and during the road force balance on the first visit they must have moved the rear tires to the front because the vibration had shifted and I could feel it more in the steering than before. Two days later: They changed out the two tires and vibration seemed reduced at times but was not gone. I left the following day on a 600 mi highway trip pulling a utility trailer with polaris, so slightly weighted, and the vibration was multiplied the entire trip (frustrating to say the least for a $55k truck), at speeds any where from 50-up mph. Returned from trip and dropped off the truck for two days with a result of they couldn't duplicate the problem (absolute BS), they then proceeded to explain to me that if I only have 1 window down and not two it causes a shuttering effect inside the cab and feels like a vibration....really?! Another few days and continued vibration I stopped by dealer unannounced and the service manager took a ride with me since I had a trailer behind me and the vibration was magnified. He was obviously way to be busy for my issue, noticed by his lack of communication and smug demeanor. His tune changed slightly when he could "barely feel it". He explained he is going to order two more tires and road force balance then to let him know if it persists. One drive on the highway and it was obvious it was still there. I want to note the last thing I want is to spend days on end at ford service. I'm just wanting a vibrating free truck. I am now scheduled for Tuesday 13th to take the truck back in to swap tires back and ???. I'm thinking drive shaft, rotors?? I pulled the utility trailer again yesterday and horrible shaking around 55mph then settles down at some speeds and increases in others. I have now made video of the vibration on the inside as well as the vibration at the transfer case and the rear diff during highway speeds when shaking is at its worst with a gopro camera, hoping the service manager will actually review it to get some idea of what's happening. Just turned 3400mi....Any ideas guys??
Edited by C6Bill
Posted

Hey guys always loved the GMC styling and interior design, and have considered buying one. I'm

kinda shying away due to this steering shake / vibration issue. When there's 361 pages of post about

this issue it really concerns me.

 

I've had 2 Toyota Tacoma's a 2012 and 2014 with this type of issue the 2014 was bought back though

lemon law dispute. My current 2015 Jeep GC has a little bit of this so I'm kinda sick of shelling out for

new vehicles and dealing with this type of issues. My goal is to go back to owning a truck since I need

to be able to haul, the only truck that doesn't seem to be dealing with vibrations and steering shake is

2015 Ford F150, but the echo boost seems to require head replacement every 20,000 due to carbon

build up.

 

Any input would be greatly appreciated

 

Thanks , Jon

Make sure you tell the dealer you are aware of the vibration issues in these trucks and request they let you take the truck for the day, Find a nice stretch of smooth freeway and drive the truck in all speed ranges through 80 mph if you can. My vibrations are really light compared to a lot I've seen video of and they're not noticeable and rougher roads because the larger amplitude road imperfections mask them. The only way they're noticeable in mine is smooth asphalt they start at 70 mph the worst at 72 and disappear at 85 mph. I'd also wait on the 2016 models, I suspect there will be some unannounced changes to fix or remedy these issues.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • My truck is a 2024 2500 LT crew cab with the 6.6 gas engine and 10 speed trans.  It has a payload of 3578 lbs.  We pull a 22' Grand Design 17MKE that has dry weight of 5006 lbs. and a gross weight of 6395 lbs.  The trailer weighs about 5800 lbs. when loaded up with all the gear.  I don't fill the water tank for travel as most of our trips are to state parks that are within a day's drive.  Depending on the wind I get anywhere from 7.5 to 9 mpg.  I do use a weight distribution hitch (WDH) and have no problems with sway or being pulled/pushed side to side by 18-wheelers passing by me.  The trailer is about the same length of the truck so that helps a lot.  I say that because we traded in our 33' Grand Design 2670 MK (7800 lbs. loaded with gear) and using the same WDH, it would get pulled side to side by big trucks passing by me. It was not bad, but you needed to stay alert and know when a big truck was pulling up beside you.  I got about 7 to 8 mpg pulling that trailer.  I normally drive about 65 to 67 mph when pulling.  Overall, I love the payload capability of the truck as I doubt I will ever get close to its limit and I love the stability it offers over a half ton truck while pulling a trailer.  I have just over 30000 miles on the truck and have not had any issues.  We live in Texas where it is relatively flat, just windy. 
    • I will say though that the 5.00 a gallon for only one fuel stop while on the Number 1, that privilege of driving from the point of Paso Robles ( where I fueled up before crossing to the coast ) and all the way up ... across the Golden Gate where I stopped and walked on the bridge ( and someone jumped off the bridge opposite the side I was on ... never saw it happen but the tow truck/paramedic told me ) and continued on north back onto No 1 and all the way up to where it connects to 101 and also explored some of the Red Woods although had been through some of that before. The fantastic view of that scenic ocean route was most certainly worth the extra dollars I spent on fuel. Just prior to that I had driven through Death Valley and that was some experience in the middle of July, then spent a couple of days in Yosemite and hiked to the top of Half Dome. The summer of 2007 was very memorable for what I saw and experienced in California.
    • Really depends on what extent the towing is.  Are you going across the country on highways or to fairly local campgrounds?  If you're just local towing then I wouldn't derate your truck much, just make sure the weight of your trailer and equipment stays below your limit.  Which for my truck is 14500lbs bumper pull.  Yeah it will work hard when you're over 5 figures in weight but who cares if it is just say 50 miles.    In my opinion the main thing with towing campers is wind resistance.  My 3200lb single axle camper tows fairly hard for what it is due to the wind.  But then if I use my truck to tow a family members 8000lb camper it doesn't really feel any different as wind resistance is similar. I've also towed a 5000lb airstream and it barely felt like anything was there.
    • I think the excitement has run its course. Or, probably need a break from the truck for a few days.   Win some, lose some, again. There was still a coolant weep from the front of the engine. This time it was one of those worm-drive hose clamps on the upper hose connecting to the water neck. There's a reason the factory doesn't use those type of clamps; they suck. The hose is all distorted and flared at the end from someone over-tightening it. The water neck just needed to be cleaned, hose seated, and have a *good* hose clamp put on, if the hose wasn't so mangled.   Thought I'd kill two birds with one stone and try to diagnose the EGR issue. It's likely a failed EGR but before I spent $85 on the part I wanted to make sure ports weren't clogged or the pintle wasn't stuck. It was kind of a bugger to remove with the upper intake installed. Re-install (because I wanted to drive it) proved more difficult.   Per the stack of service paperwork, the EGR has already been replaced 4 times since 1996.   It would reason, then, that the EGR flange on the lower intake manifold has had its share of techs trying to work quickly and maybe one of them seated a bolt slightly cross-threaded at one time. The bolt didn't come out without significant effort and tried as I did, it wouldn't go in without significant effort. And then, the mounting ear on the right side of the EGR (lower intake casting) cracked, and crumbled off. $%&@!!!   I hate everything. Or, at least, I did in that moment. I was pretty calm, considering. This is what older, junky vehicles do. They nickel and dime their owners, piss them off, and things break that shouldn't break because of shoddy design/workmanship, poorly done repairs.   If I want to make it right, I'll need to replace the lower intake manifold and basically re-do everything I spent days doing. At least it should go quicker this time, right?! Looks like a lower intake (used/junk, of course) will run me about $150.   Once I get the new EGR, I'll see if I can bolt it up snug enough to verify proper operation, and if it solves the persistent CEL that sets on decel for EGR flow, I'll know I'm back on the right track. And then I can decide how to proceed.   Also, an idler pulley has given up. It began squeaking in pain on startup. It's clear this truck hasn't been thoroughly driven in a long, long time as things are just letting go and shaking out. I may have given it the beans once or twice to make sure my intake gaskets were doing their job. Flog an old vehicle, expect what it gives in return.    
    • Thanks for the info but wow, these are pricey! $100 apiece. A full set of smaller ones can be had for less that the cost of one of these. Gotta be a cheaper option out there but I have yet to find it. I don't want to use grommets as I can see leaking in my future. Now that I am looking at it, I might be able to just get the valve stem and modify the sensor to fit. Looks like I can just modify the hole a bit to adapt.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...