Jump to content

Recommended Posts

Posted
2 hours ago, AE1M said:

Still looking for a used 2016-2017.  Is this vibration problem in every truck or is it just hit & miss?

 

Bob

 

I have several friends and family with 2014-2018s and I'm the only one that has had vibration issues.  Always test drive up to 75 mph and see if it shakes.  One that does not shake will be smooth even on loud / rough surfaces, the ones that shake will feel awful even on the best pavement.  Walk away from any that dont feel smooth as glass  because there are plenty out there that ride great.

Posted
14 minutes ago, BlackSilverado said:

I have several friends and family with 2014-2018s and I'm the only one that has had vibration issues.  Always test drive up to 75 mph and see if it shakes.  One that does not shake will be smooth even on loud / rough surfaces, the ones that shake will feel awful even on the best pavement.  Walk away from any that dont feel smooth as glass  because there are plenty out there that ride great.

Thank you for the reply, I went to test drive a High Country today and took it up to 80mph and it seemed very smooth.  Is this a problem that develops over time?

 

Posted
On 7/29/2018 at 1:24 PM, AE1M said:

Thank you for the reply, I went to test drive a High Country today and took it up to 80mph and it seemed very smooth.  Is this a problem that develops over time?

 

Mine was there from day 1, and most I've heard about were basically day 1 issues as well that just got worse over time, and/or it was missed during the test drive because they never got up to highway speed.  If you can drive 75-80 and don't feel a shake, it's probably one of the many that dont have a problem.

Posted

My 2014 had the shake from 73-80mph, it would be there some mornings and not others and then the ride home it may be there and it may not. I had Firestone Destination AT P275/55 R20 installed before i picked it up from the dealership new. I changed my tires out 2k miles ago to BFG KO2 275/55 R20 load range D and have not had the shake since. I think its something to do with the air flow/aerodynamics and the tire bounce from the P series tire excites it like a basket ball bouncing, i noticed the shake wouldnt be there if there was a side wind. This is just my evaluation over the last 4.5 years of owning it.

  • Thanks 1
Posted
12 hours ago, BlackSilverado said:

Mine was there from day 1, and most I've heard about were basically day 1 issues as well that just got worse over time, and/or it was missed during the test drive because they never got up to highway speed.  If you can drive 75-80 and don't feel a shake, it's probably one of the many that dont have a problem.

My truck developed the shake at 28k miles. Was aware of the problem early on and periodically drove up to 80mph to see if the shake was there. Once it showed up, it came and went randomly.. towing a boat did not help the shakes... it also got a minor shake around 40mph. 

 

To me, it sounds like its a gamble...and a harmonic vibration, which will change with road condition and/or tire balance and/or bad shocks and/or drive line variations...  a critically damped system should not do this... the 2014-2018 platform is not this, imho...  good luck.. 

 

Posted
On 7/28/2018 at 6:16 PM, Bart’s Silverado said:

Buy a programmer and program the converter for hyper mileage or economy. See my other posts for more info on riding smooth. I'm satisfied with my Silverado now but definitely will never buy a GM truck again. Corporate is not interested in customer satisfaction at all. If they are they can call me at 931-675-1161 and we will discuss. Bet all I hear is the wind!

Agree @Bart’s SilveradoI'll bet a reflash to a performance tune would clear up my issue.  Does anyone have experience with defending warranty coverage after reprogramming, changing out the driveshaft, tires, rims, and/or shocks?  I would think you'd be SOL if still within warranty.  That's the only thing keeping me from taking the matter into my own hands at this point.  

Posted

Well I’m taking it to dealer #2 to check and see what the vibration is about, along with the steering wheel being off center as well as the transmission (clunk, downifting). Dealer said that’s kind of “normal” and it’s probably tranny fluid needing replacing. Anyway I’ll report back with their “findings” ?

Posted (edited)

I bought a lease turn in 2015 LT Silverado this January. Only 30k on the dash. Everything I wanted. I have brought it back to the dealer 5 times for shaking issues and it's given me some serious buyers remorse. 

 

My last converstion with the head mechanic at the Chevrolet dealership was one where he leveled with me. He stated GM is well aware of the problem and that specific dealership had box trucks full of parts shipped to it along with engineers to try and fix these vibrations.

 

My last visit consisted of a PICO scope for vibration where my truck was considered "well under" the limit for vibration for GM standards. The mechanic told me it's nesrly

impossible to get GM to budge on any legal action. He has sat in on many of the proceedings where the customer just wasted their time and money. 

 

Ultimately, the result of GM engineers and their parts trucks was that the frame stiffening that GM did is preventing "some" of the trucks dissipating the vibrations from normal driving.

 

My vibrations have been much more noticeable at speeds around 40-45 and 70-75 now. Sometimes shimmy occurs when the AFM is trying to kick in. The truck feels like it's tripping over itself with the random driveline clunks and shuddering.

 

The driveline clunks i can deal with as I have driven many GM s with the same sounds for over 160k. The shaking, it pisses me off because I know the dealership has backing from GM to fix the problem.

 

 

 

 

 

 

Edited by Shawn5800
Posted

At 46k going to dealer and ordering new tires which they suggest will end my shake.  This will be 3rd set including the stock SR-a’s.

 

Posted
1 hour ago, Gofas said:

At 46k going to dealer and ordering new tires which they suggest will end my shake.  This will be 3rd set including the stock SR-a’s.

 

You are just throwing your money away. Please see my other posts. Your problem is driveshaft related. Get rid of that long fat aluminum driveshaft. Go to a two piece shaft if yours is 2wd or a steel replacement shaft if yours is 4wd. I recommend you look up Performance Drivelines in California. 

Posted

Update...Believe my last posting was May 19th or there a bouts.  Contacted BBB just before the 36/36 B-B warranty

expired, OK, they set up an arbitration hearing at their office in mid June in Las Vegas.  GM rep, arbitrator (lawyer), myself,

and an office clerk.  We all had to promise to tell the truth just like in court and all this was recorded.  It was very formal and

a structured outline was followed with statements followed by a Q and A session.  It lasted about an hour and a half.  The

arbitrator then went out and inspected the truck, recorded the VIN and mileage.  OK, one week later got a call about the arbitrator's ruling

and it directed GM to repair the truck to my satisfaction.  Then started GM calls, etc to find a dealer to correct the problem.  4 dealers

would not take it due to workload or ????  Finally found a dealer 100 miles away.  Took it to them 29 days ago and they are still

working on it.  Get updates weekly (tires, shocks, right rear axle, engine mounts, etc, etc).  Will pass along the outcome if and when.

Stay tuned!!!!

  • Like 1
Posted
32 minutes ago, red70judge said:

Update...Believe my last posting was May 19th or there a bouts.  Contacted BBB just before the 36/36 B-B warranty

expired, OK, they set up an arbitration hearing at their office in mid June in Las Vegas.  GM rep, arbitrator (lawyer), myself,

and an office clerk.  We all had to promise to tell the truth just like in court and all this was recorded.  It was very formal and

a structured outline was followed with statements followed by a Q and A session.  It lasted about an hour and a half.  The

arbitrator then went out and inspected the truck, recorded the VIN and mileage.  OK, one week later got a call about the arbitrator's ruling

and it directed GM to repair the truck to my satisfaction.  Then started GM calls, etc to find a dealer to correct the problem.  4 dealers

would not take it due to workload or ????  Finally found a dealer 100 miles away.  Took it to them 29 days ago and they are still

working on it.  Get updates weekly (tires, shocks, right rear axle, engine mounts, etc, etc).  Will pass along the outcome if and when.

Stay tuned!!!!

It will wind up being the driveshaft. I replaced mine with a 2 piece steel driveshaft from Performance Drivelines and I have a very smooth riding 2017 Silverado LTZ. Love the truck now! Best $800 I ever spent. Hate that GM is too ignorant and too cheap to actually fix these trucks. 

Posted
1 hour ago, Bart’s Silverado said:

It will wind up being the driveshaft. I replaced mine with a 2 piece steel driveshaft from Performance Drivelines and I have a very smooth riding 2017 Silverado LTZ. Love the truck now! Best $800 I ever spent. Hate that GM is too ignorant and too cheap to actually fix these trucks. 

 

1 hour ago, Bart’s Silverado said:

It will wind up being the driveshaft. I replaced mine with a 2 piece steel driveshaft from Performance Drivelines and I have a very smooth riding 2017 Silverado LTZ. Love the truck now! Best $800 I ever spent. Hate that GM is too ignorant and too cheap to actually fix these trucks. 

I just don’t know if I want to sink $800 in to a brand new truck (in my case). I’d rather take a loss and get a ram truck. It’s all about the principle with me. Either way I taking it to the dealership tomorrow where I bought it and see what they do

Posted
13 hours ago, Bart’s Silverado said:

You are just throwing your money away. Please see my other posts. Your problem is driveshaft related. Get rid of that long fat aluminum driveshaft. Go to a two piece shaft if yours is 2wd or a steel replacement shaft if yours is 4wd. I recommend you look up Performance Drivelines in California. 

 

 

15 hours ago, Gofas said:

At 46k going to dealer and ordering new tires which they suggest will end my shake.  This will be 3rd set including the stock SR-a’s.

 

Did the other set of replacement tires not end the shake?  Why do you think the 3rd set will be different?  I fixed mine with a set of take-off wheels and tires from a Yukon, but my problem was the 22" wheels with the bad Bridgestone tires.

Posted (edited)

Well I thought if you put truck in neutral and shake stops it’s driveshaft?

my truck still shakes even in neutral. Haha or maybe drive shaft keeps spinning cause it’s connected to the rear axle, duh!

 

I even let dealer service guy pick tire.

they picked Nitto grappler stock size. 

He says they had least problems with shake using these...

Edited by Gofas

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Because single shot injectors are ancient and multi hole injectors provide smoother running engines and sharper throttle response due to the fuel being atomized better..the best lead I have is a 24lb blue top injector almost everything matches up but the injector will put out about 26lb/hr which is just outside the gm threshold.figured id ask here to see if there was an absolute answer
    • Why is my question?   Any change in injectors requires a tune. Unless you are going back with the OEM part number or a newer part number of that same injector.   Any size difference or type difference like the EV6 style injectors all have different injector data for them. And there is no EV6 injector that matches the factory 25 lb/hr size that your truck comes with. I've been messing with these trucks and tuning them for a long time and what you trying to do doesn't exactly make sense to me.
    • My 6.6 gas lt8 had lifter noise with 28000 miles bought new 2026 and while driven to dealer it threw #1 rod bearing “HD my ass” good luck with yours i hope it don’t turn a rod bearing!
    • When a condition becomes a business model.    https://www.gm-trucks.com/gm-truck-suv-incentives-pricing-2026/   Zane posted this in "Latest Articles".    The honest bottom line   Truck buyers have spent three years assuming this is a temporary condition that will break once inventories normalize. GM just presented it to investors as a durable strategy, on a chart, as evidence of good management.   Inventory did normalize. GM is at 511,000 units and squarely inside its own 50 to 60 day target. The discounts still did not come back, because the low incentive number is the goal rather than a symptom of shortage.   Plan your purchase around that reality instead of waiting for it to change. Follow our ongoing GM News coverage for pricing and incentive changes as the next-generation trucks land.
    • Thought it was raining this morning when we woke. Nope. Dew point was over 80 F and humidity 98%. Zero visibility distance. Everything was 'sweating'. I've seen rain come out of clouds but never out of Pepper or the tree trunks.    Wicked storms just missed us sliding off to the east but by blocks. Heat index about 110 F with air temp in the 90's.    This is  our third wave this month of multiple days of this type of weather. And yet the grass is going dormant and the ground is cracking this side of the street and water up the the hood opposite. Just weird stuff going on. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...