Jump to content

Recommended Posts

Posted
22 hours ago, epstein said:

did your vibration come back after the axles and driveshaft were replaced?

 

 

Brian 

No mine is good . Center console just shakes on bumpy roads now going to do a center console swap soon . 

Posted

2017 RCSB Silverado 1500 4x4----On my 3rd set of tires now..  It's NOT the tires!  GM needs to make this right as I'm a loyal GM product buyer/user BUT I will change hats if they keep dragging this on.  Get me a new STEEL driveshaft and we can go from there.

Posted

HA.  What makes you think your loyalty to GM means anything to them?  You are replaceable. 

Posted
Valid point.  Customer service appears to have gone out the window in the name of shareholder return.
 
Yeah about 15 yrs. ago.

Sent from my SM-T580 using Tapatalk

Posted

I just took my 2018 Silverado 1500 back to the dealer for this vibration issue They replaced the torque converter a few weeks ago with no relief Can't wait to see what they come up with this time

  • 3 weeks later...
  • 3 weeks later...
Posted

Just a little update on the truck because i have had a few guys message me and ask . Truck has been very smooth still since changing the driveshaft to a new aluminium one piece and swapping in the Yukon axles . 

Had my tires road force balanced last week because i lost some wheel weight off-roading and what a difference that has made truck feels smoother now then the day i bought it .

 

Hope this helps others . 

  • Like 1
  • Thanks 1
Posted
On 8/5/2013 at 8:11 AM, ChevyTech77 said:

Either the tire/wheel assemblies have excessive radial force variation, the rear driveshaft (propshaft) is out of balance or the right side engine mount needs to be shimmed 3 mm. Those are the only vibration issues that I have seen with a K2XX truck.

Can you tell me what is the test to determine if you need a 3 mm shim for the engine mount?   

Posted
What I find interesting about this issue is that some days, I take the same road, go about 78-80 mph and have major vibration.  Other days, same road, same speed and NO vibration.  Is it possible that road heat, heat outside, etc can play a role in how much vibration there is?  The other night I had none but previously that day on the same road during the day I had the normal (what I am used to) vibration.  Just curious if mine is the only one that is intermittent.

My 14 Denali is the same way. Sometimes it’s great sometimes it shakes really bad. Same roads. I just got my truck back from the dealership. I replaced the tires, pad, rotors and CV joints before taking it into the dealer. From my experience they will place blame anywhere they can. Perfect example they told me my new tires were the problem. I told them no it’s the exact same vibration as before new tires. They replaced quite a few parts in the trans and it still does the same thing.

 

I just noticed they said my tires were starting to cup. The new tires didn’t even have 300 miles when I took it to the dealership. My old tires didn’t wear uneven or have cupping. Frustrating.....

 

d37c7ae1253ec27d96faddce6d77b821.jpg

 

dc375b9b405399b2ea2707fe31862548.jpg

 

 

Sent from my iPhone using Tapatalk Pro

Posted
40 minutes ago, da90 said:

My 14 Denali is the same way. Sometimes it’s great sometimes it shakes really bad. Same roads. I just got my truck back from the dealership. I replaced the tires, pad, rotors and CV joints before taking it into the dealer. From my experience they will place blame anywhere they can. Perfect example they told me my new tires were the problem. I told them no it’s the exact same vibration as before new tires. They replaced quite a few parts in the trans and it still does the same thing.

 

I just noticed they said my tires were starting to cup. The new tires didn’t even have 300 miles when I took it to the dealership. My old tires didn’t wear uneven or have cupping. Frustrating.....

 

d37c7ae1253ec27d96faddce6d77b821.jpg

 

dc375b9b405399b2ea2707fe31862548.jpg

 

 

Sent from my iPhone using Tapatalk Pro

That's ridiculous!  They're brand new!  The sad thing is, when I bought mine new in June 2016, I bought some used rims and thought the vibration was due to a bent rim.  So I bought a whole new rim and still had the vibration and got rid of the tires and the wheels thinking that would solve it (before I knew about the vibration as an issue for most of us).  Now I run  new black 22's and tires and was convinced I screwed up something on my side because of the whole rim issue and it's something GM didn't do right.  And because I didn't know it, I never asked for anything to be done, I thought it was my RIMs.  I am hoping for enough complaints that they'll be forced to do something.  Until then, I will just keep driving it, vibrations and all!

  • Like 1
Posted

2016 1500 Z71 Chebby…. dealer told me the vibe was from the "aggressive" tread of the Bridgestone Duelers.  Aggressive tread?!?  WTF, apparently he believed I just fell off the cabbage truck.  Needless to say, no resolution to the problem.  Good thing is (I guess), the truck only rarely vibrates.  And only at highway speeds after driving for 20-30 or so minutes.  Something, maybe the tires (not aggressive tread related), gets warmed up and causes or leads to the vibration.  Prolly will be my last GM product after 50 years of GM for 95% of my vehicle purchases, unless they step up.

  • Like 1
Posted

Just took mine back to the dealer for shaking between 40-75 mph 2018 LTZ 5.3  6 speed  2wd So far the dealer has in this order changed the torque converter. changed the motor mounts. road force balanced the tires. scratched up one of the aluminum rims. changed trans fluid and replaced scratched up rim The shake is exactly the same as the first time I took it to them. I dropped the truck off this morning for another round

IMG_6655.JPG

Posted (edited)
2 hours ago, Rick Murphy said:

Just took mine back to the dealer for shaking between 40-75 mph 2018 LTZ 5.3  6 speed  2wd So far the dealer has in this order changed the torque converter. changed the motor mounts. road force balanced the tires. scratched up one of the aluminum rims. changed trans fluid and replaced scratched up rim The shake is exactly the same as the first time I took it to them. I dropped the truck off this morning for another round

IMG_6655.JPG

I would ask them to check the run out of the driveshaft and or the rear axle shafts . 

Edited by Kylebr1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Sure, but they do have some affordable options like the Trax, Trailblazer, Envista, and Encore. Some of these have a cheaper base price than the Civic, though the fuel economy isn’t as high. The main problem is that people WANT the highest trim with all the goodies and finance for like 7 years. That’s how ppl “afford” the more expensive vehicles. 
    • Holy s**t - not much of a parts thrower you say? You BLASTED that thing with the parts cannon!  You'd have been probably $1,000 ahead if you had just brought it to a competent shop rather than shotgunning a bunch of parts it clearly didn't need.   Just FYI - oil additives are really, REALLY good at ONE thing ... and that's emptying your wallet. They're ALL useless gimmicks.   If that has the L94 or L99, then #7 is an AFM cylinder. I'd suspect a failed lifter in that case.   If you leaned on wiring, sensors, and/or connectors while changing the oil, you'll have to check all that to be sure pins didn't get pulled out, connectors broken, etc.. Old wire loom that was barely adequate when new is certainly brittle by year 19 - make sure wires aren't chaffed and shorting out somewhere where you might have leaned. or supported yourself on it.   If your a mechanic, why didn't you just find out what you were missing and troubleshoot from there??  TIMED spark, fuel PSI / injector pulse, air, compression.  Can't make ANY money going the parts cannon route.
    • LOL! Are you joking?? That wax SUCKS! 100% gimmick made to "look" good.    After just TWO winters I had severe surface rusting in patches over 90% of the frame. Only reason it looks great in the pics is because I SATURATED the frame every single fall with used motor oil for 14 of the 16 years I owned it. Otherwise it would've been sent to the crusher 8 years earlier with the speed it was rusting prior!    I sold that POS 3 years ago. Was a gigantic headache the second it rolled off the showroom floor. Brakes pulsated on the TEST DRIVE. Door trim fell off the 1st week! Interior squeaked and rattled, and the drivetrain clunked after 2k miles. 4x4 switch failed shortly after. Front end - ball joints, struts, hub bearings - all failed between 38k-50k. Engine started burning oil at 50k. Rear and and transmission failed before 100k. Nothing but problems, and frustration with the piss-poor engineering designed to make you give up. Well, it worked! Nothing on that truck was easy to remove ... except the wheels. They haven't figured out how to screw that up yet. Give 'em time ...   I won't make that mistake again. EVER.   Such fond memories ... https://postimg.cc/K1qf23tS  https://postimg.cc/gallery/X02z64J  https://postimg.cc/gallery/mHSRXZv  https://postimg.cc/gallery/D4mMRfL
    • Different monitors do their test only under conditions specific to that monitor.  you MIGHT find the drive cycle conditions for the monitor that isn't ready on this site: https://lemon-manuals.la/   If it's not there, then it should be on alldata.com for your truck, but it requires a paid subscription.   And you need to know which specific monitor isn't ready.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...