Jump to content

Custom Trail Boss Console Upgrade?

Texas_Trail_Boss
 Share

Recommended Posts

  • Replies 401
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

MisterEhEDC
MisterEhEDC

So I decided to peek inside the the top of the jumper seat today and I snapped some pictures for you guys. Here is my piece of the puzzle.   It looks like the lower portion of the arm rest h

Jeffed
Jeffed

I purchased the upper part of the armrest from the dealer for $490 Cdn$.  The bottom part apparently is multiple part and was super expensive (i think about $1000).   Anyways, it was a bit of wor

Little Rascal
Little Rascal

I will give a summary of what I did.  Not being mechanical at all, it wasn't easy but very doable.    The first step was to take the plastic side panels off the console.  Right off the bat,

Posted Images

Brutus230 Enthusiast

Brutus230

Posted
Posted
1 hour ago, dctackett10 said:

For those who swapped out the center consoles.  The clips from gm. They are priced at 2.25. Is that for the pack of 5 or each?  Do I need to add 5 or is it a pack of 5?  

 

Also. When changing the console. Does the driver and passenger seat need to be removed or just loosen?

You just need to loosen all four bolts on the drivers seat you don’t need to remove it just move it a little to the side

  • Like 1
dctackett10 Enthusiast

dctackett10

Posted
Posted
29 minutes ago, Zelas said:

I just found this online. I paid 290 for mine with a hook up at a bodyshop. This is a better deal for those who don't want today shipping.

https://sdparts.com/i-24134630-genuine-gm-parts-84602302-center-console-upgrade-for-2019-silverado-work-truck-models.html?gclid=EAIaIQobChMI8bCHi6Xf4wIVlpOzCh1FMAVFEAYYBSABEgJOCPD_BwE

Yup. That’s the one I’ll be ordering.  But I want them clips from gm. But not for 17.50 shipping lol.   Gotta find them somewhere else after I order this console 

Chad's Trail Boss Enthusiast

Chad's Trail Boss

Posted
Posted



For those who swapped out the center consoles.  The clips from gm. They are priced at 2.25. Is that for the pack of 5 or each?  Do I need to add 5 or is it a pack of 5?  
 
Also. When changing the console. Does the driver and passenger seat need to be removed or just loosen?


The price for the clips is each and you need 5 of them.
All 4 of the bolts holding down the driver seat need too be removed so that the entire seat can be moved forward and back as required to get to the hardware of the center console and seatbelt attachment. There is a wire attached to the seat for something that prevents you from being able to completely removed the seat. No easy plug to just simply unplug and be able to remove.
The passenger seat can just be slid all the way back and then reclined to gain access to the side of the console.

Sent from my SM-G975U using Tapatalk

  • Like 2
Chad's Trail Boss Enthusiast

Chad's Trail Boss

Posted
Posted
Well I found the center storage same price as the one from gm but with free shipping. 

 

So I was was just going to order the clips from gm but they want 17.50 for shipping LOL.  Does anyone have a picture of the clips so I can see if local part stores have anything like them

I bought everything from my dealer hassle free. Might have paid a little more but there were no hidden shipping fees that I got slapped accross the face with at checkout.

Here is what I was quoted from my dealer.

Only tax was added to the prices.

 

Console

8464-7286 $438 +tax

 

Replacement clips

1154-9266. $3.46 each +tax

5 required

 

Rear wheel well liners

(Hardware kit included)

8426-3801. $150 +tax

 

 

 

Sent from my SM-G975U using Tapatalk

 

 

 

FLTrailBoss Enthusiast

FLTrailBoss

Posted
Posted

I just purchase the 2019 Trail Boss ,custom, and love it except I can not understand  why they would not have ANY storage in the center console that folds into a jumpseat.!!!!! Anyone have any part numbers for a replacement? I want a center console with some storage......ugh.

Also, if anyone has added anything to the accessories I would be interested, i.e. extra USB, security system, DECK, tool box drawers for the bed.  Thanks!!

20190805_163022.jpg

  • Like 1
Chad's Trail Boss Enthusiast

Chad's Trail Boss

Posted
Posted
I just purchase the 2019 Trail Boss ,custom, and love it except I can not understand  why they would not have ANY storage in the center console that folds into a jumpseat.!!!!! Anyone have any part numbers for a replacement? I want a center console with some storage......ugh.
Also, if anyone has added anything to the accessories I would be interested, i.e. extra USB, security system, DECK, tool box drawers for the bed.  Thanks!!
20190805_163022.thumb.jpg.2dfee3b1435ce87d9cb4349defa0044a.jpg
Dude! Read my post right above your post.

Sent from my SM-G975U using Tapatalk

  • Like 1
  • Haha 1
Gary Raulerson New Member

Gary Raulerson

Posted
Posted

I just bought a 2019 Trail Boss last week and was dumbfounded that the armrest console doesn't open up for storage.  It reminds me of when you order cable or satellite tv. You want to get  a certain channel, so you have to order the next higher package with a lot of channels you don't want or need.  If I wanted an LT I'd have ordered it.  It's ridiculous that the center console of a custom level truck doesn't have storage.  I think the last truck that I had without center console storage must've been in the 80's.  Bad call G.M. / Chevy.

tanner709 Enthusiast

tanner709

Posted
Posted
8 minutes ago, Gary Raulerson said:

I just bought a 2019 Trail Boss last week and was dumbfounded that the armrest console doesn't open up for storage.  It reminds me of when you order cable or satellite tv. You want to get  a certain channel, so you have to order the next higher package with a lot of channels you don't want or need.  If I wanted an LT I'd have ordered it.  It's ridiculous that the center console of a custom level truck doesn't have storage.  I think the last truck that I had without center console storage must've been in the 80's.  Bad call G.M. / Chevy.

custom = cheap = lowest model available. it doesn't mean it was a custom built truck

 

I agree it is a piss poor decision to remove it, but that's why the truck was so cheap.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Grumpy Bear
      OCI, not when but why?

      By Grumpy Bear · Posted

      Sad thing is that this doesn't have to be the case. LSPI can be solved without a reduction in TBN. Swap Ca for Mg.  Cats are not a issue if the OEM can get a ring and valve guide seal even at SN levels of SAPS. Dizzy is purring like a kitten with a bowl of warm milk. 200K of Full SAPS oil and zero detonation issues and nice a clean inside and out. This shouldn't be an issue. It isn't 1920.    Tell ya what AMSOIL SS is excellent at, internal cleanliness. The new formula is even a step up from their already outstanding cleanliness levels. Can't say the OEM offering is quite that clean. There marketing suggest the SS is cleaner.     That is the only defense with at shelf oil. Nothing wrong with them if you ignore the marketing and OEM 'recommended' OCI and use a thimble full of common sense. 😉 You go sir. 
    • StingerZ16
      Roll up bed cover experiences

      By StingerZ16 · Posted

      I started with a folding cover by BAK PAC on my 2500. It went bad after close to 5 years. Bent and vinyl coming loose. Contacted BAK and they gave me a very good discount on a Revolver. Had it a number of years. Mostly outdoor storage. Some garage storage. Vinyl started to come loose. Still under warranty so they replaced to cover. Sold the 2500, bought the 1500 and got another revolver for it. Had it a couple years now and no issues. I store it indoors. Got a bit of discount when buying it as well. If you are seeing problems, contact BAK or real truck and let them know. Customer service was pretty good. But I think they changed their warranty.
    • Chuck FB
      Towing In Loose Gravel

      By Chuck FB · Posted

      I agree, there is no one answer fits all as every rig is different, one may be pulling some little aluminum fishing boat while another is towing a monstrosity that weighs a lot and hopefully the owner if the rig has some prior experience to know what drive mode they should choose.    It also struck me and this is from watching a few of those boat ramp escapades videos in the past, Ford being one of the vehicles that has the auto front axle hubs and sure enough its found out that one hub has crapped out and won't engage and may not have manual hubs to even select on both sides so they are on the boat ramp stuck with no four wheel drive and spinning .... they flat out need a tow to get up the ramp and deal with the vehicles new found issues. That can happen to all brands of pickup, finding out either four wheel drive or 4 low isn't working right at the time its needed it to work as some electronic crap has failed. 
    • Chuck FB
      Towing In Loose Gravel

      By Chuck FB · Posted

      Its possible you never had the joy of the crappy boat launches we tend to have around here or really some of them are just grades down to the river if its a river scenario and the conditions change all the time with the river levels and silt deposits. Some of the lakes we went to years ago, there was no such thing as a cement pad that went down into the water that the trailer stayed on, it was gravel maybe up to the water line and then duck crap much beyond that so sinking the boat tires into mud. Of course some of the more established lakes had a cement bar type boat ramp but sometimes it was covered in green slime closer and certainly within the water and a two wheel drive had all sorts of fun if one had to touch that slime with the rear tires.    A neighbor of mine had made a comment years back with his chev truck that was probably about the same year as yours but a half ton extended cab 4x4 and he a a fiberglass boat with an inboard so it wasn't a feather weight and he had gone out to one of the large popular lakes in the area and don't ask me how this happened but he was in two wheel drive as he figured he didn't require four wheel drive for that boat ramp and somehow upon pulling the boat out he twisted one of his drive axles. I suspect it must have spun and then grabbed on the cement ramp and shocked it to the degree of twisting it. He would have had the standard 8.5 or whatever it was axle housing as the 9.5 ring gear like my truck has also has larger drive axles as far as I know. Anyway he was feeling a vibration driving home and had it checked out and a shop found that the tire/hub was wobbling because of the axle had twisted so in went a new drive axle. After that bad experience he said he made sure to put it into four wheel drive to lower the stress on the rear axle. Of course that is where an HD truck can handle a lot more stress and no doubt these newer half tons with their larger ring gears probably have larger drive axles as well to match vs back in the day. 
    • asilverblazer
      2027 GMC Sierra: Official Discussion

      By asilverblazer · Posted

      Desirable - as in does someone WANT one, aspire to have one. Could reasonably buy any car they want and CHOOSE these instead.    I didn't watch the video, why did they win?

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...