Seat Movement Issues

[Uknow87]

I made a post way back when on this thread, probably 6 to 8 months ago when the dealer fixed mine. It's been about 6000 miles since the fix I think, and the click is coming back now.

[aaronarf]

Just ordered a retainer off ebay...worth the $3 to not make a trip to the dealer. Thanks guys for the info, hoping it fixes my seat movement!!

 

 

Did my install the other day, took ~10 minutes. You do not need to use any sort of 'death wheel' to cut this. Pair of snips and done, the material is soft. Solved my issues, we'll see as a rack the miles up if its a long term fix.

[BeaverPolice]

I know this is mainly a topic of the seat moving, but mine has a creaking noise that comes from the back right corner of the seat when driving. I think it has to do with the springs in the seat. It is absolutely annoying to drive. It is a 2015 crew cab with 39,000 miles. Does anyone have any idea what is causing this and what can be done to fix?

[th3r00st3r]

After my return to the dealer after the part came in, they replaced the entire seat track(clips wouldn't work they said) and I haven't had an issue for a couple weeks. We'll see.

 

Sent from my SM-G935T using Tapatalk

[ChevyMan2015]

After my return to the dealer after the part came in, they replaced the entire seat track(clips wouldn't work they said) and I haven't had an issue for a couple weeks. We'll see.

 

Sent from my SM-G935T using Tapatalk

 

How long did it take them to do it? Dealer ordered my seat track replacement, just waiting for it to come in.

[th3r00st3r]

 

How long did it take them to do it? Dealer ordered my seat track replacement, just waiting for it to come in.

 

My appointment was at 7:30 AM. I didn't get out of there till almost 11 AM. Might be better to drop it off.

[ChevyMan2015]

 

My appointment was at 7:30 AM. I didn't get out of there till almost 11 AM. Might be better to drop it off.

 

Thanks.

[beetle]

Mine would stop moving laterally if I lowered the seat all the way down but then it was too low for my liking. My solution (so far) was to raise the rear of the seat by installing 5/8 inch thick shims/washers and longer bolts where the seat bolts to the floor and leaving the seat powered all the way down. Much better than having the dealer jack around with it.

[Spendit]

Just at dealer (here in Michigan) to get my 2014 done - $235 labor and a $5 part........they had to keep the truck overnight to inform me of costs. No thanks, I'll do it myself!

[aaronarf]

Just at dealer (here in Michigan) to get my 2014 done - $235 labor and a $5 part........they had to keep the truck overnight to inform me of costs. No thanks, I'll do it myself!

 

 

WHAT!! $235 in labor only to do the retainer clip?!

[caskey_b]

save yourself $230 and do the hose clamp trick...

[Brian2015]

Drop my 2016 off at the dealer for the second seat frame replacement in 18k miles.

[Smoothbassman]

save yourself $230 and do the hose clamp trick...

I did this a long time ago. No more issues.

 

Bootleg but effective.

 

 

Sent from my SM-N950U using Tapatalk

[cmysstailights]

I did this a long time ago. No more issues.

 

Bootleg but effective.

 

 

Sent from my SM-N950U using Tapatalk

Whats the hose clamp trick?

 

Sent from my SM-G935P using Tapatalk

[likeschevy]

Just a question so the black retainer one per seat, goes on the white clip that is on the side without the seat motor, by the door?