Jump to content

2019 RST Stock LED headlights, bulbs not replaceable??

Mike Ketchup
 Share

Recommended Posts

Mike Ketchup Enthusiast

Mike Ketchup

Posted
Posted

Hey guys, first post here.

 

I have a 2019 RST with the stock LED headlights.  I think in stock form these headlights aren’t nearly bright enough.  I Ordered bulbs online (v4’s in h11 for the low beam and csp mini’s in 9005 for the high beam) because thats what the video on the retrofit source said was the correct ones.  
 

I received them today and went to install them and the backs of my headlight housings have no spots to remove a bulb, only the turn signals. It’s like the bulbs are permanently built into the housing. Both low and high beam.

 

so it occurred to me that the bulbs are probably for the base model Silverado’s with the halogens.


does this mean that the stock leds can’t be upgraded??  That’s kinda stupid 

 

mafd2 Senior Enthusiast

mafd2

Posted
Posted
33 minutes ago, Mike Ketchup said:

Hey guys, first post here.

 

I have a 2019 RST with the stock LED headlights.  I think in stock form these headlights aren’t nearly bright enough.  I Ordered bulbs online (v4’s in h11 for the low beam and csp mini’s in 9005 for the high beam) because thats what the video on the retrofit source said was the correct ones.  
 

I received them today and went to install them and the backs of my headlight housings have no spots to remove a bulb, only the turn signals. It’s like the bulbs are permanently built into the housing. Both low and high beam.

 

so it occurred to me that the bulbs are probably for the base model Silverado’s with the halogens.


does this mean that the stock leds can’t be upgraded??  That’s kinda stupid 

 

Wow...  not nearly bright enough?  You're the first one in thousands of T1 posts who ever complained about the LED headlights... You won't get any better.  Only a few have said they would like brighter fogs. Are your lights adjusted? Have you leveled or lowered. Those housings are sealed. I'm impressed with the light output and they're as bright as you will find. 

  • Like 3
Mike Ketchup Enthusiast

Mike Ketchup

Posted
  • Author
Posted
3 minutes ago, mafd2 said:

Wow...  not nearly bright enough?  You're the first one in thousands of T1 posts who ever complained about the LED headlights... You won't get any better.  Only a few have said they would like brighter fogs. Are your lights adjusted? Have you leveled or lowered. Those housings are sealed. I'm impressed with the light output and they're as bright as you will find. 

After riding in the high country with the high output leds, I liked them. But in my RST, definitely not.  A good set of Hids is much much better. The adjustment is fine, they’re just kinda dim for my liking. I’m not trying to have light scattered everywhere like having hids in a reflector housing, I just figured there would be a way to upgrade. 

Dunn Senior Enthusiast

Dunn

Posted
Posted

mine are fantastic.....they are not base model halogens, and all headlights should be replaceable....tho I think youll be disappointed on new ones as stock are great...

  • Like 1
psk256 Enthusiast

psk256

Posted
Posted

I think the output is fine., distance not so much but its ok. Probably because the truck sits a lot higher, the angle has to be lower to meet DOT specs.  I have not driven the high county, so I cannot compare the two.  Just going off my other car with LEDS.

Mike Ketchup Enthusiast

Mike Ketchup

Posted
  • Author
Posted
13 minutes ago, psk256 said:

I think the output is fine., distance not so much but its ok. Probably because the truck sits a lot higher, the angle has to be lower to meet DOT specs.  I have not driven the high county, so I cannot compare the two.  Just going off my other car with LEDS.

That’s my issue, the distance. The immediate area in front of the truck isn’t bad, especially with the fogs but I feel like they’re really not throwing the light far at all

  • Like 1
BIGDOGx Senior Enthusiast

BIGDOGx

Posted
Posted
On 2/19/2020 at 6:47 PM, Mike Ketchup said:

Hey guys, first post here.

 

I have a 2019 RST with the stock LED headlights.  I think in stock form these headlights aren’t nearly bright enough.  I Ordered bulbs online (v4’s in h11 for the low beam and csp mini’s in 9005 for the high beam) because thats what the video on the retrofit source said was the correct ones.  
 

I received them today and went to install them and the backs of my headlight housings have no spots to remove a bulb, only the turn signals. It’s like the bulbs are permanently built into the housing. Both low and high beam.

 

so it occurred to me that the bulbs are probably for the base model Silverado’s with the halogens.


does this mean that the stock leds can’t be upgraded??  That’s kinda stupid 

 

Come drive my truck for a day and then you won't complain anymore haha.?

  • 11 months later...
Dan Crawford New Member

Dan Crawford

Posted
Posted

Mike - I appreciate your post.  I bought the exact same bulb sizes and spent about an hour last night looking under the hood trying to find where the bulbs insert.  I also agree the light’s distance is the problem.  We travel a lot of 2 lane roads out in the country at night and I really want to spot deer, bear, etc... as far away as possible.  I upgraded the headlights in my Jeep to aftermarket LEDs and they are twice as bright.  I love my Silverado but am really disappointed with a couple of design decisions they made.  Headlight output and height of the passenger seat are at the top of the list.  
so, does anyone know what to do in 5+ years when one of the headlights burn out?  Do we have to disassemble the front of the truck and replace the entire headlight unit?

19 Denali ultimate Enthusiast

19 Denali ultimate

Posted
Posted

I agree with Mike Ketchup on this sort of.  My last truck had HID's and I really miss the distance down the road that they lit up, but agree with others about the LED's being bright enough.  I just wish they would throw light further than they do.

SILVER SLED Senior Enthusiast

SILVER SLED

Posted
Posted

I also agree that theses RST lights are not bright enough.  Not sure what anybody was driving before they got one of these new trucks that say they are bright.  My 18 LTZ lights were A LOT brighter.  

  • Like 1
  • 3 months later...
msaul37 Enthusiast

msaul37

Posted
Posted

i figured when i traded my '14 silverado that the LEDs would be night/day difference, but other than the 'color', that's all i've seen. I do half of my driving at night, so i need to have more vision down the road for suicidal deer.  I'm afraid the only way to upgrade them is to get entire headlight replacements.. housing and all. I also don't like how focused the beam is. I don't want to blind oncoming drivers, but if something like a deer is 5 ft to the side of the truck, about 50 ft away, I can't really see it.

  • 1 month later...
DVR Enthusiast

DVR

Posted
Posted

Having trouble finding any info for improving 2021 RST headlights. Absolutely HORRIBLE for our mountain driving with suicidal deer.  Drove truck for first time in dark last night and even with high beams the reach is so poor. Dealer adjusted levels after Bilstein's installed. Any suggestions where to search greatly appreciated.

 

Having trouble finding any info for improving 2021 RST headlights. Absolutely HORRIBLE for our mountain driving with suicidal deer.  Drove truck for first time in dark last night and even with high beams the reach is so poor. Dealer adjusted levels after Bilstein's installed. Any suggestions where to search greatly appreciated.

 
 Reply to this topic...
  • Replies39
  • CreatedJan 26
  • Last Reply5 hr

TOP POSTERS IN THIS TOPIC

POPULAR POSTS

I've never realized so many people have night blindness.

I've noticed the same on my truck. The low beams are nice but the high beams are garbage. I don't know if there's a good...

To make any changes you will have to swap out headlights completely for something aftermarket.  The low/high beams are not...

POSTED IMAGES

  •  
  •  
 
 
 
 
 
  • Replies39
  • CreatedJan 26
  • Last Reply5 hr

TOP POSTERS IN THIS TOPIC

POPULAR POSTS

I've never realized so many people have night blindness.

I've noticed the same on my truck. The low beams are nice but the high beams are garbage. I don't know if there's a good...

To make any changes you will have to swap out headlights completely for something aftermarket.  The low/high beams are not...

POSTED IMAGES

  •  
  •  
 
 
 
 
 
DVR Enthusiast

DVR

Posted
Posted

Having trouble finding any info for improving 2021 RST headlights. Absolutely HORRIBLE for our mountain driving with suicidal deer.  Drove truck for first time in dark last night and even with high beams the reach is so poor. Dealer adjusted levels after Bilstein's installed. Any suggestions where to search greatly appreciated.

dgstarr63 Enthusiast

dgstarr63

Posted
Posted

I had a 2015 Silverado LT Z71. The headlights were totally unacceptable.  I installed great LED replacements on the low beams for under $50. Now I have a 2021 LT Z71 with better, but not bright enough headlamps with non replaceable bulbs. If one burns out it could cost me about $1000, is this progress? In several ways my 2015 truck was superior to the 2021. The only reason I purchased a new one was because the old one was totaled in an accident. If I had it to over I would buy a 20 year old truck with low miles. GM is gone down hill with their terrible 8l90 transmission and cylinder deactivation valve train failures.  I will not purchase a Toyota, because I only buy American, but I will only purchase older GM vehicles from now on.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • newdude
      Gasser Subforum Has Been Quiet - - So, Regenerative Braking and Using L10

      By newdude · Posted

      No such thing as regenerative braking on a pure ICE vehicle.     Regenerative braking is the re-capture of energy from electric motors and stores it in the battery pack.  So hybrids, PHEV and EVs have regenerative braking.     What you are seeing is the charging system changing modes is all.  Its likely entering charge mode for some sort of reason is all.  All of the charging modes will be listed below.   As for L10 vs D.  L10 turns off automatic grade braking.  L10 puts you in control of grade downshifts where in D it will automatically do it based on brake pedal position and other factors.  Otherwise L10 and D drive exactly the same aside from that one aspect.    Battery Sulfation Mode The BCM will enter this mode when the interpreted Generator output voltage is less than 13.2 V for 45 minutes. When this condition exists the BCM will enter Charge Mode for 2–3 minutes. The BCM will then determine which mode to enter depending on voltage requirements.   Charge Mode The BCM will enter Charge Mode when ever one of the following conditions are met:   Windshield wipers are ON for more than 3 s. Climate Control Voltage Boost Mode Request is true, as sensed by the HVAC control module via serial data. High speed cooling fan, rear defogger, and HVAC high speed blower operation can cause the BCM to enter the Charge Mode. The estimated battery temperature is less than 0°C (32°F). Battery State of Charge is less than 80%. Vehicle speed is greater than 145 km/h (90 mph) A current sensor malfunction exists. System voltage is determined to be below 12.56 V When any one of these conditions is met, the system will set targeted generator output voltage to a charging voltage between 13.9–15.5 V, depending on the battery state of charge and estimated battery temperature.   Fuel Economy Mode The BCM will enter Fuel Economy Mode when the estimated battery temperature is at least 0°C (32°F) but less than or equal to 80°C (176°F), the calculated battery current is less than 15 A and greater than −8 A, and the battery state-of-charge is greater than or equal to 80%. Its targeted generator output voltage is the open circuit voltage of the battery and can be between 12.5–13.1 V. When fuel economy mode is active, the generator is not charging, only maintaining open circuit battery voltage. The BCM will exit this mode and enter Charge Mode when any of the conditions described above are present.   Headlamp Mode The BCM will enter Headlamp Mode when ever the head lamps are ON (high or low beams). Voltage will be regulated between 13.9–14.5 V.   Start Up Mode When the engine is started the BCM sets a targeted generator output voltage of 14.5 V for 30 s.   Tow/Haul Mode (if applicable) Pressing the Tow/Haul Mode button located on the center stack, the vehicle system voltage is raised and the remote (non-vehicle) battery will be charged. Having the headlamps on will raise the system voltage and if the Tow/Haul button is applied it will not serve any purpose. The voltage is regulated between 13.9-14.5 V.      
    • jaszr2
      Active Grille Delete

      By jaszr2 · Posted

      Hello from Australia Just sharing that there is now a way to delete the active shutters entirely with just a plug in module. Opens up tons of room to light bars etc.
    • jake111
      Gasser Subforum Has Been Quiet - - So, Regenerative Braking and Using L10

      By jake111 · Posted

      I have an observation and a question... 1) I watch the voltage closely because I have had to dial in the cut-in/cut-out voltages of the battery separator to my camper.  The "smart" charging drives me nuts.  Anyway, I noticed that when coasting for a while, and especially if lightly using the brakes (though not necessary), the voltage goes up from mid/high-13 volts to mid/high-14 volts.  Then it drops back down after stopping or going again.  Consistently!   The only explanation I can come up with is REGENERATIVE BRAKING!  Well, maybe that's a little bit of an exaggeration, but it's certainly free extra battery charging.   2) Driving on mountain roads I will use L and vary the max gear.  Things straighten out and I end up in L10.  Sometimes I leave it there for a while.  Is there any difference between L10 and D?   
    • devonthegreat
      anyone interested in a 2002 Chevy Silverado 4x4 parts truck NYC

      By devonthegreat · Posted

      **SOLD** Please end or delete post. thank you
    • PBNB
      Tire pressure for 37s

      By PBNB · Posted

      Do you think this width might affect the chalk test with a higher pressure closer to 65psi? I think lowering the pressure makes sense to get the tread to lay flatter

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...